THEY HAVEN'T CHANGED! They are the SAME! We just got the new one and first thing had to replace the drive shafts and they wont stay on. Even putting lock tight on the grub screws doesn't help. This guy is just dishonest.
My buddy got one of these and the damn thing disintegrated when he looked at it. Cheap junk. For a few dollars more, you can get a Kraton 8s. Don't waste your money on this JUNK! Traxxas 4 life
As your proberbly aware I'm a bit of a fan of most of these little Chinese 1:16 trucks. I bought a WPL C14 off AliExpress before Christmas for £16 delivered! I've upgraded the electronics and stuck a 180 motor in it and it now runs 2S (loads more power through it). It came with the second generation axles (metal) and drive shafts from the factory. And I have ragged the arse off it on numerous occasions through mud, up rocks, in water. It's been dropped, submerged and trodden on. As yet NOTHING has broken. NOOTTHHHIIINNGGG! It got a custom paint job and the paint cost more than the truck! For the money you cannot go wrong, a few inexpensive tweaks and you have yourself a banging little RC offroader!!! 👍👍👍
@@TomleyRC I did have an early B24 and the plastic gears stripped, but It only did it when I made it haul rocks round the garden! Which to be honest was my fault! 😧
looks cool, i assume you made it proportional ? is that the 180 motor ? i still do not have a wpl but i have a 2 jjrc;s (6x6) and 2 fayee/eachine.. 1 in conversion the other stock. in 3 weeks there is a small hill-climb event in town so i better get some stuff finished/build. think an old sanwa m11 is overkill ? i don't want to buy another transmitter.
Now that’s a wheelie on something that shouldn’t be able to do one, it can take a lot of weight. I was just looking at this vehicle last night at 3am I think I need one now.
I love these WPL's, and you bring up an interesting point about everything being properly fitted. If you take your time and make sure everything is turning smoothly when you assemble it, it'll run fantastic! I have the 2 speed in my B16 (with the plastic gears) but made sure it was engaging smoothly and that the drivelines were also not binding ar anything else. That 6x6 is an absolute bear. It's not settling by building one of these little trucks, I far prefer it to the 1/10 scale rigs. Far cheaper, they require much less power and get better run times, plus, any hill is a great hill for these little guys. Keep crusading Tomley! We're right there with you...
No, the plastics are not even 25% the strength of the original design - Which was , as every other IT hustle trade product, the lowest quality on this entire planet.
You done a fantastic Job with the Simple Upgrades, Love Budget Rcs and what you can do to make them better for Buttons 👍 fantastic test run and Weight Run mate, really enjoyed this video as always 👍😎👍
I think you did a good job of making your point last time, and only those who were looking for something to get cross about would have misunderstood you. As for this video, can I take it that the B14, which seems to look like my B1, comes with a 180 motor?
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
Love Kevin Talbot! Honesty is best.
THEY HAVEN'T CHANGED! They are the SAME! We just got the new one and first thing had to replace the drive shafts and they wont stay on. Even putting lock tight on the grub screws doesn't help. This guy is just dishonest.
My new one has the better shaft.maybe u didn't get a nwer model , could b old stock
My buddy got one of these and the damn thing disintegrated when he looked at it. Cheap junk.
For a few dollars more, you can get a Kraton 8s. Don't waste your money on this JUNK!
Traxxas 4 life
kevin talbot is the original rc channel no matter how hard you try you will never beat him 😊
Kevin is one of the best, chill, funny, and awesome, people out there.
You really shouldn’t lie to people nothing is completely junk
taz mcrobie I completely agree he is a sick liar🙁
That would not do THAT I REPEAT WOULD NOT DO THAT STOCK MOTOR
Traxxas is good
Great bit of kit. I've got tracks on mine 2 year old brother for snow had for one bloody day ha ha.
Mine is doing that stock rtr
And thare is also some bigger brands that make metal chassis that suck
A positive comment
I´m Wpl Fanboy too, to personal projects. But it is amazing!!! Wow!!
Yup great fun to be had with these little rigs. Good vid bro!
As your proberbly aware I'm a bit of a fan of most of these little Chinese 1:16 trucks. I bought a WPL C14 off AliExpress before Christmas for £16 delivered! I've upgraded the electronics and stuck a 180 motor in it and it now runs 2S (loads more power through it). It came with the second generation axles (metal) and drive shafts from the factory. And I have ragged the arse off it on numerous occasions through mud, up rocks, in water. It's been dropped, submerged and trodden on. As yet NOTHING has broken. NOOTTHHHIIINNGGG! It got a custom paint job and the paint cost more than the truck! For the money you cannot go wrong, a few inexpensive tweaks and you have yourself a banging little RC offroader!!! 👍👍👍
They are certainly tough!
@@TomleyRC I did have an early B24 and the plastic gears stripped, but It only did it when I made it haul rocks round the garden! Which to be honest was my fault! 😧
Good honest video, one of these days i will get a WPL
awesome upgrade,great video
Is thia full propoM
'The wheel is wobbling, it's my OCD'. So pleased it's not just me who does this!
They all wobble! 👍
looks cool, i assume you made it proportional ?
is that the 180 motor ?
i still do not have a wpl but i have a 2 jjrc;s (6x6) and 2 fayee/eachine.. 1 in conversion the other stock.
in 3 weeks there is a small hill-climb event in town so i better get some stuff finished/build.
think an old sanwa m11 is overkill ? i don't want to buy another transmitter.
The kit comes with a proper servo and 180 motor
Cheers for WPL Fan Boys 👍😄😆
Now that’s a wheelie on something that shouldn’t be able to do one, it can take a lot of weight. I was just looking at this vehicle last night at 3am I think I need one now.
Not OCD , it's ATD - attention to detail . Aircraft Tech's , we just can't help ourselves . Impressive little truck with a Very wobbly wheel . 🤔🇦🇺😎
Yes, you are right.... you can't cut corners in the Aviation world!
I love these WPL's, and you bring up an interesting point about everything being properly fitted. If you take your time and make sure everything is turning smoothly when you assemble it, it'll run fantastic! I have the 2 speed in my B16 (with the plastic gears) but made sure it was engaging smoothly and that the drivelines were also not binding ar anything else. That 6x6 is an absolute bear. It's not settling by building one of these little trucks, I far prefer it to the 1/10 scale rigs. Far cheaper, they require much less power and get better run times, plus, any hill is a great hill for these little guys. Keep crusading Tomley! We're right there with you...
For the price,these trucks are as tough as old boots.
Agreed, my c14 is coming up a year old and ive put it through some hard times 😂
No, the plastics are not even 25% the strength of the original design - Which was , as every other IT hustle trade product, the lowest quality on this entire planet.
You done a fantastic Job with the Simple Upgrades, Love Budget Rcs and what you can do to make them better for Buttons 👍 fantastic test run and Weight Run mate, really enjoyed this video as always 👍😎👍
Cheers Tony. Hope you are enjoying the weekend (unless you are working of course!)
My b24 is running metal gears and driveshafts, strong enough to climb ridiculous gradients time and time again! My black gearbox also cracked 😂
I've split so may black gear boxes pushing a 180 up em' it's just not funny! 😲
the Lamborghini is so
great video, you do good video work, thank you for the show.. see u on the next one
I think you did a good job of making your point last time, and only those who were looking for something to get cross about would have misunderstood you.
As for this video, can I take it that the B14, which seems to look like my B1, comes with a 180 motor?
Yes Del, the B1/B14 are the same, i've always called it the 'B1'. The kits come with the 180 motor 👍
Buen video amigo 👍
lovely content
Awesome job, dude! 😃
Those trucks are amazing! Of course the more expensive are better and so on, but for me the WPLs are more than enough. 😊
strong cars lift heavy loads of friends
nice vid mate
Cheers mate
Great video i need to get me one of those.....wpl is really growing on me
Tough little bugger! Great test mate, proves what the WPL can do with a few cheap mods, I'm suitably impressed! :)
Perfect 💯💯
I use mine to Push my son around. about 30 pounds.
Lovely it's running good, COOL cool little rig, 👌 NC MOUNTAINS🏞 Backyard RC AND MORE.
I love wpl
great video, I wish you success in your creative work, I like each other!!👍🏻👍🏻👍🏻👍🏻😉