How to Reverse Upside Down Working Position Of Hydraulic Jack
HTML-код
- Опубликовано: 7 июн 2024
- 📢 #HandmadeCreativeChannel📢
📢 Subscribe My Channel - / @handmadecreativechannel 📢
Hello friends, today I will show you How to Reverse upside down Working Position Of Hydraulic Jack. in the video I will show you in detail how to reverse the operation of the hydraulic jack to use it upside down and how to use it in a lying position, for this I will use copper tubing and glue. With these 2 projects I made a hydraulic vise and a hydraulic press. I hope you like the video.
🎥🎥 Hydraulic Vise Video Here -- • Amazing Hydraulic Jack... 🎥🎥
🎥🎥 Hydraulic Press Video Here -- • What Unbelievable Idea... 🎥🎥 - Хобби
This is a neat idea my friend 🙂
🍀👌☺️ Thanks brother
I didn't know that, it was very easy.
Thanks for sharing with us my Friend🙌🙂🤝
Thanks brother👌☺️🙏🍀
Kíc 12tấn bao nhiêu k anh
Thank you so much to you
Intelligent..👌👍
So helpful. Mersi ...
Watched your video and read comments. Tried to follow your video except for relocating the filler hole.
Everything seems to look good. Pressure test showed new tube had a slight vacuum after operating the pump. However, after reassembling, I can’t get any lift on the jack shaft by operating the pump. I’ve manually lifted the jack base to extend the shaft. But still get no shaft response to operating the pump. I’m guessing the problem is with bleeding the air. But I’m at a loss and Ang help would bee appreciated.
Ничего не понятно😅но интересно, досмотрю до конца😂
Clear and understandable process.... BUT why did you refill with that grotty dirty oil?
Saludos, qué tipo de aceite usa?
@@joseanselmogutierrezmendez7427 I use a light 5W hydraulic oil, made specifically for this. You can probably use Dexron III automatic transmission fluid as well.
@@N269 Muchas gracias, muy bien desde Venezuela!
👍👍👍
Watching
👍👍💪
I wouldn't change the position of the filler hole, it makes bleeding easier, but it's not necessary.
Upside down Jack,
Just only work upsidown now 🤣👊
N ai arătat cum ai pierdut bilele!
Like a bull in a china shoppe - but always great ideas.
Why not create a boot to stabilize the new bottom?
Does it still work the regular way up?
No. It doesn't.
Для чего это не понял
half of the video is how to clean the oil tracks
Why would you need an upside down jack?
I will made own my manuel press table.