I found a bad solenoid that was causing the fuse to blow. I have replaced several solenoid/valve assemblies (I had some leaks). I have two questions: Do I put all solenoids in ‘off’ position before reporting? Does it matter which PC board tab I attach the two wires of each solenoid? I know where valve 1 PC board tabs are but does it matter which wire goes to the two tabs? I see no identifying marks on the wires of each solenoid.
So my jets come on, the control panel lights up. The jets and lights buttons work. But the sequence buttons don't do anything. Is that the data cable? Thanks!
Excellent! This is the second time your videos saved me! Thank you!
This is a great video but how do we get to that fuse and board? I took off the main panel and can't see a way to access anything behind the headrest.
How do I access this PC board? It is not behind the main panel where the control box and pump is.
I found a bad solenoid that was causing the fuse to blow. I have replaced several solenoid/valve assemblies (I had some leaks). I have two questions:
Do I put all solenoids in ‘off’ position before reporting?
Does it matter which PC board tab I attach the two wires of each solenoid? I know where valve 1 PC board tabs are but does it matter which wire goes to the two tabs? I see no identifying marks on the wires of each solenoid.
This is a great video. I figured out how to get to the board to test it. Anyone have any ideas on where to get the replacement transformer?
So my jets come on, the control panel lights up. The jets and lights buttons work. But the sequence buttons don't do anything. Is that the data cable? Thanks!
So, all my solenoids are reading about 25+ ohms, but the fuse keeps blowing. Any other suggestions on why?
What is the fuse called
Massage Sequenzer funktioniert bei mir nicht mehr und geht auch kein Licht ! warum ?