Air pressure fluctuations due to temperature. As far as I can research from a warm 30c day to a 0c day you could see a 10% change in pressure. I’m sure there are lots of statistics on this but living in Canada where I’ve ridden 40c and -5 c all I can say is that the pressure difference is not enough to have a pedal hit the ground vs perfect sag. Would agree with the damping changing more at lower temps and have felt that myself but that is in -5. Also about 2 corners into the trail the suspension is moving at such a rate that it heats back up to a level that you would not noticed the difference. Being from Aus originally I don’t feel the temps there change enough to really make it an issue.
@01:32 - I totally agree with this! I'm in New Mexico/Colorado and I run the X2 on my SB160. We had some snow and cold weather and it took about 2 weeks for the lower dryer trails to be rideable. So the bike sat, changed nothing on the tune, same pressure. Began a ride after snow melted and I said, "man this bike feels like a pig today. What is going on?" Went on the climbs and it felt like it weighed 50 pounds. I checked air pressure and added about 15psi more to adjust for the cold air as I forgot about this and it was my first cold air ride at 40 degrees. Maybe most people don't realize this but those who know suspension can feel the difference. It messes with my head and I can't enjoy the ride I keep trying to think of adding more air or more compression. So, I get it and I keep saying I'm getting a coil but end up not because I have no clue on what spring to get. I hate to purchase all kinds of them to find the right one.
That is true about the coil. Excellent once you’ve found your preferred spring rate and preload position, but you’ll likely go back and forth a bit with different springs and fine tuning with preload to find the sweet spot
Did you go back to one token because you were bottoming out, or was it just a better feel from the spring? I've haven't ridden it yet but I just pulled my last token out. I'm heavier and on a more progressive bike however, but other than not getting full travel I had no issues with 1 token or even 2. Agree the shock is sensational!
Have you considered maybe you’re overthinking air pressure? I dial my settings and leave it for the season more or less. I primarily use my bikes for jumps and, admittedly, they aren’t tuned amazing for tech, but they work for everything and I don’t have to constantly mess with my suspension.
Once you get your body destroyed by jank :D and not jumps, it's pretty obvious on fox 38 10psi is like... from heaven to heavy suffering ahah I don't have issues with my X2 tho However, I'm on RM altitude and don't give a sht about bottoming out ever
I forgot to ask, you ever ride the Fox X2? If so, how does this compare, the Vivid? Fox is recalling all of their 2020-2023 X2's for brand new 2024 X2's (all new internals), I just need to send mine in.
Yeah I’ve spent a fair bit of time on X2s the 2020-23 shocks were all failing non stop. Under hard riding on certain frames they’d be done in a week, some are lasting a full service cycle. But the new 24 seems to have addressed all the reliability issues. Apart from that the performance of an x2 when set up right is as good as it gets on an air shock. I’d say the new vivid is every bit as good as the X2 in performance, with an easier setup process. But less fine tuning compression range than the X2
what do you think of this compared to the super deluxe? I am thinking about getting one for a 2nd shock for my remedy while the super deluxe is getting serviced. the super deluxe/lyrik combo has been good to me this season been riding more enduro tracks.
Have you ever run a Fox X2? If so how does it compare? I just brought an Ibis Ripmo V2s size L frame here in NZ and it came stock with an X2 which was defective straight away and in getting fixed atm.
@@JJaguar333 yeah the X2 is killer. But its reliability was terrible for a good couple of years there. The new 2024 has addressed the issues and seems to be good. They should upgrade your shock to the 2024 gear, thats what fox has been offering to everyone with the dud models. But yeah its a killer shock performance wise. Perfect air spring
do you endeavor to use specific amount of stroke while pumping on parking lot? I feel like with proper SAG Im still able to push shock to bottom out bumper easily.
Air is 78% nitrogen. Very little gains to be made. Get a hard tail instead and pick better lines. Your knees are nearly 90% of the suspension travel on a FS bike anyway.
The nukeproof spring I bought came with the spacer but was not necessary on the shock, but the spacer was necessary using the mrp progressive spring so it came in handy in the end
It would be killer on that bike aswell. This shock will improve almost any bike given the right setup. Certainly an improvement on the slashes thrushaft shock
I’m 77 ish on the bike. Static sag is a hard one to get accurate on that shock because it equalises at around 30% so it always drops you in from 30-33%ish. Great for performance equalising at sag. To compare the riding sag to the equivalent seated coil sag I’d say 32%. But reads 34 35 because of the eq hole
Thanks for that and putting a video up about the Vivid air as there’s not a lot out there on it ! I might try dropping 20-30 or so psi and see how it behaves as long as the sag doesn’t change to dramatically but it jumps great at the moment just the rougher stuff rock garden type thing it could do with being a bit more compliant apart from that it’s a great shock especially with HBO dialed in .
Clunking at full extension, like when the shock or fork extends it hits a hard stop rather than a more controlled transition from extending to fully extended
Theoretically it should be pretty simple to figure out how much your pressure changes with temperature. Ik air isn't an ideal gas, but you could still probably use the ideal gas law PV=nRT to figure it out. Doing that calculation with your shock could tell you pretty close to the exact amount of psi you need to add/remove for a given change in temperature
@@dezzydiamond7121 Yep!, I have fallen in love with my hard tail again. FS bike has been stuck in garage with a blown shock for past 8 weeks. I've had the bits to fix it for 6 weeks.
@@dezzydiamond7121 Some people enjoy getting into the technical weeds of stuff. It's like making coffee, you can get a drinkable cup pretty easily but if your hobby is really sinking your teeth into it you can.
What kind of trails do you ride? RockShox app recommends me 212 PSI to get 28% sag on this shock, and it's right on the money(with all dials OPEN). I'm confused how you're running 162 PSI, I read below that you're around 77 KG which is exactly what I weigh with all of my gear on. I went for my first ride the other day and had some good size drops to flat and completely bottomed the thing at 210 PSI with 3 tokens in it. If I went down to 162 I think I'd have way too much sag and nowhere near enough pressure to keep it from bottoming. How can you ride it with such low PSI? My Current settings: 212 PSI - 1 Token - 28% SAG HSC - OPEN LSC - Middle Rebound - 9 from Closed HBO + 1 This is my local hill, lots of rocks! ruclips.net/video/EHG_Uh78fVE/видео.html
What bike are you on? The different designs will require different levels of support from the shock to compliment the frame. I’m also at around 33-35% at those numbers
@@mtbtelly5522 Stumpy Evo Alloy 2022 S4 For what it's worth Charley Murray races Enduro for specialized and has this shock on his bike and weighs about 175 and is running around 210 psi as well. Just got done with a ride with mostly big jumps, berms, and flow trails, I ended on these settings: 212 PSI 1 TOKEN HBO + 1 Rebound 9 from closed HSC 0 LSC +1 Going to ride my local bike park / Enduro trails tomorrow, will report back after where I land on settings.
@@mtbtelly5522 I'm on a stumpy evo 2022 alloy. I just gave it another test ride, this time flowy trails with big jumps. I landed on these settings: 212 PSI - 1 Token - 28% Sag 9 Rebound from Closed HSC Middle LSC + 1 HBO + 1 I definitely neared the bottom multiple times, I'm going to the bike park I linked above tomorrow and will give another review after. Have you actually been able to completely bottom the ring out on the stanchion? I feel like even though I can hear the bottom out, the ring doesn't actually get to the end of the stanchion, I've still got a few MM left. For what it's worth, I did drop down to 180 psi just now to see what sag I would be at, and I'm around 40%. I watched this video by Charles Murray and at around 2:20 he talks about his setup for the vivid. He's about 5 lbs more than me and is around the same pressures at 210 psi. ruclips.net/video/AhTtGP0y03A/видео.html
I love that you’re picky. We should be picky for how much these things cost.
I completely agree, thanks
Air pressure fluctuations due to temperature.
As far as I can research from a warm 30c day to a 0c day you could see a 10% change in pressure. I’m sure there are lots of statistics on this but living in Canada where I’ve ridden 40c and -5 c all I can say is that the pressure difference is not enough to have a pedal hit the ground vs perfect sag.
Would agree with the damping changing more at lower temps and have felt that myself but that is in -5.
Also about 2 corners into the trail the suspension is moving at such a rate that it heats back up to a level that you would not noticed the difference.
Being from Aus originally I don’t feel the temps there change enough to really make it an issue.
@01:32 - I totally agree with this! I'm in New Mexico/Colorado and I run the X2 on my SB160. We had some snow and cold weather and it took about 2 weeks for the lower dryer trails to be rideable. So the bike sat, changed nothing on the tune, same pressure. Began a ride after snow melted and I said, "man this bike feels like a pig today. What is going on?" Went on the climbs and it felt like it weighed 50 pounds. I checked air pressure and added about 15psi more to adjust for the cold air as I forgot about this and it was my first cold air ride at 40 degrees.
Maybe most people don't realize this but those who know suspension can feel the difference. It messes with my head and I can't enjoy the ride I keep trying to think of adding more air or more compression. So, I get it and I keep saying I'm getting a coil but end up not because I have no clue on what spring to get. I hate to purchase all kinds of them to find the right one.
That is true about the coil. Excellent once you’ve found your preferred spring rate and preload position, but you’ll likely go back and forth a bit with different springs and fine tuning with preload to find the sweet spot
True words of wisdom! Sounds like you should service that lockout switch.
Good as gold once I flicked it back and forth. Pretty killer shock
Good to hear from you Telly! Hope all is well with you brotha
Did you go back to one token because you were bottoming out, or was it just a better feel from the spring? I've haven't ridden it yet but I just pulled my last token out. I'm heavier and on a more progressive bike however, but other than not getting full travel I had no issues with 1 token or even 2. Agree the shock is sensational!
I agree with pressure I always recheck them at lunch when I am at park
Have you considered maybe you’re overthinking air pressure? I dial my settings and leave it for the season more or less. I primarily use my bikes for jumps and, admittedly, they aren’t tuned amazing for tech, but they work for everything and I don’t have to constantly mess with my suspension.
Once you get your body destroyed by jank :D and not jumps, it's pretty obvious
on fox 38 10psi is like... from heaven to heavy suffering ahah
I don't have issues with my X2 tho
However, I'm on RM altitude and don't give a sht about bottoming out ever
I forgot to ask, you ever ride the Fox X2? If so, how does this compare, the Vivid? Fox is recalling all of their 2020-2023 X2's for brand new 2024 X2's (all new internals), I just need to send mine in.
Yeah I’ve spent a fair bit of time on X2s the 2020-23 shocks were all failing non stop. Under hard riding on certain frames they’d be done in a week, some are lasting a full service cycle. But the new 24 seems to have addressed all the reliability issues. Apart from that the performance of an x2 when set up right is as good as it gets on an air shock. I’d say the new vivid is every bit as good as the X2 in performance, with an easier setup process. But less fine tuning compression range than the X2
Air or coil? Im looking at getting a VIVID and trying to decide if to go with air or coil? Stumpjumper Evo Comp Alloy. Thank you.
what do you think of this compared to the super deluxe? I am thinking about getting one for a 2nd shock for my remedy while the super deluxe is getting serviced. the super deluxe/lyrik combo has been good to me this season been riding more enduro tracks.
Have you ever run a Fox X2? If so how does it compare? I just brought an Ibis Ripmo V2s size L frame here in NZ and it came stock with an X2 which was defective straight away and in getting fixed atm.
@@JJaguar333 yeah the X2 is killer. But its reliability was terrible for a good couple of years there. The new 2024 has addressed the issues and seems to be good. They should upgrade your shock to the 2024 gear, thats what fox has been offering to everyone with the dud models. But yeah its a killer shock performance wise. Perfect air spring
@@mtbtelly5522 yes a friend said that. He’s run both the X2 and the super deluxe ultimate. I’ve come of a DVO Jade X on my 2017 trek Slash 9.8 frame.
do you endeavor to use specific amount of stroke while pumping on parking lot? I feel like with proper SAG Im still able to push shock to bottom out bumper easily.
Interesting listen. Ive just got a 23 super deluxe ultimate and absolutely loving that shock at the minute. I think its the same damper as these two??
Yes I believe so
Age old motorsport problem, fill it with nitrogen instead of air. Reacts less to temperature changes.
Yeah I’ve considered a nitrogen setup, but I haven’t made it happen yet
Air is 78% nitrogen. Very little gains to be made.
Get a hard tail instead and pick better lines.
Your knees are nearly 90% of the suspension travel on a FS bike anyway.
hey mate! who do you go to for the tune on the bomber thx
Cyclinic in QLD
@@mtbtelly5522 thx mate
What coil and adapter you using on your ‘23 SDU?
The nukeproof spring I bought came with the spacer but was not necessary on the shock, but the spacer was necessary using the mrp progressive spring so it came in handy in the end
Perfect thank you! How’s the MRP spring fit?
@@owenswarthout686 yeah it fits fine, but needs the spacer or its too short to get contact on the upper retaining ring
would be interesting what you think about the new vivid on your slash compared to the other shocks you rode it with ?!
It would be killer on that bike aswell. This shock will improve almost any bike given the right setup. Certainly an improvement on the slashes thrushaft shock
162 psi what kind of sag you running as you look like you could be my size and weight .
I’m 82kg and running 235psi to get 30% sag
I’m 77 ish on the bike. Static sag is a hard one to get accurate on that shock because it equalises at around 30% so it always drops you in from 30-33%ish.
Great for performance equalising at sag. To compare the riding sag to the equivalent seated coil sag I’d say 32%. But reads 34 35 because of the eq hole
Thanks for that and putting a video up about the Vivid air as there’s not a lot out there on it !
I might try dropping 20-30 or so psi and see how it behaves as long as the sag doesn’t change to dramatically but it jumps great at the moment just the rougher stuff rock garden type thing it could do with being a bit more compliant apart from that it’s a great shock especially with HBO dialed in .
@@luke070299 what bike are you on?
What do you mean by ‘top out’?
Clunking at full extension, like when the shock or fork extends it hits a hard stop rather than a more controlled transition from extending to fully extended
@@mtbtelly5522 got it. Thanks. And you say EXT shocks do this? Have you ridden the e-Storia?
@@neilmartinez143 i haven’t ridden the e-storia, but have ridden 2 storias and they both had the topout
Theoretically it should be pretty simple to figure out how much your pressure changes with temperature. Ik air isn't an ideal gas, but you could still probably use the ideal gas law PV=nRT to figure it out. Doing that calculation with your shock could tell you pretty close to the exact amount of psi you need to add/remove for a given change in temperature
@@dezzydiamond7121 Yep!, I have fallen in love with my hard tail again. FS bike has been stuck in garage with a blown shock for past 8 weeks. I've had the bits to fix it for 6 weeks.
@@dezzydiamond7121 Some people enjoy getting into the technical weeds of stuff. It's like making coffee, you can get a drinkable cup pretty easily but if your hobby is really sinking your teeth into it you can.
What kind of trails do you ride? RockShox app recommends me 212 PSI to get 28% sag on this shock, and it's right on the money(with all dials OPEN). I'm confused how you're running 162 PSI, I read below that you're around 77 KG which is exactly what I weigh with all of my gear on.
I went for my first ride the other day and had some good size drops to flat and completely bottomed the thing at 210 PSI with 3 tokens in it. If I went down to 162 I think I'd have way too much sag and nowhere near enough pressure to keep it from bottoming. How can you ride it with such low PSI?
My Current settings:
212 PSI - 1 Token - 28% SAG
HSC - OPEN
LSC - Middle
Rebound - 9 from Closed
HBO + 1
This is my local hill, lots of rocks!
ruclips.net/video/EHG_Uh78fVE/видео.html
What bike are you on? The different designs will require different levels of support from the shock to compliment the frame. I’m also at around 33-35% at those numbers
At 210 psi my bike is high af in the back and extremely rough and resistant to give any travel
@@mtbtelly5522
Stumpy Evo Alloy 2022 S4
For what it's worth Charley Murray races Enduro for specialized and has this shock on his bike and weighs about 175 and is running around 210 psi as well.
Just got done with a ride with mostly big jumps, berms, and flow trails, I ended on these settings:
212 PSI
1 TOKEN
HBO + 1
Rebound 9 from closed
HSC 0
LSC +1
Going to ride my local bike park / Enduro trails tomorrow, will report back after where I land on settings.
@@mtbtelly5522
I'm on a stumpy evo 2022 alloy. I just gave it another test ride, this time flowy trails with big jumps. I landed on these settings:
212 PSI - 1 Token - 28% Sag
9 Rebound from Closed
HSC Middle
LSC + 1
HBO + 1
I definitely neared the bottom multiple times, I'm going to the bike park I linked above tomorrow and will give another review after. Have you actually been able to completely bottom the ring out on the stanchion? I feel like even though I can hear the bottom out, the ring doesn't actually get to the end of the stanchion, I've still got a few MM left.
For what it's worth, I did drop down to 180 psi just now to see what sag I would be at, and I'm around 40%. I watched this video by Charles Murray and at around 2:20 he talks about his setup for the vivid. He's about 5 lbs more than me and is around the same pressures at 210 psi.
ruclips.net/video/AhTtGP0y03A/видео.html
@@tinglestravels ah yeah the stumpy and other specialized bikes need a fair bit more spring for support on their frame designs