JohnG. Reacts Yessir, I’ve been looking for a double pedal for a while now, and although still expensive for me, the 319 looks really promising so thank u!
Just got the pedal and put it on my alesis kit..did u figure out a way to keep the pedal on the kickpad??? After i play double bass for a few mins it slides off the kick pad..very annoying!!
@@daemon3spade I have my drums in the basement,so i do not have to worry about noise. Those raisers are handy for people in flats,but my issue was about pedals hitting the metal "holders" that you thighten to the base of the bass drum pad. I cut out a bit of the "base" of the bass drum for the metal holders and that solved my problem.
Not picking on alesis directly but...many e-kits that comes with those awful kick towers. i could see it shaking as you played it. I hate playing a moving target and got rid of mine. You really would do better with a used Roland kd-120 kick. They have better response and are totally solid.
I do have to agree there. I completely replaced this one with a Roland KD-10, since i'm on bit of a budget and while it's still not perfect in terms of stability, it's so much better than the Alesis one.
You can stop the beaters from hitting your foot with some adjustments to the pedal with a drum key. It's not your feet ;) There's an adjustment you can make to angle the beaters closer to the bass drum. Also, you can make the beaters shorter. You just need a drum key to loosen these screws one of them should be above the spring. Loosen it and angle the footboard so the beaters are closer to the bass drum, the tighten the screw again. To make the beaters shorter, there should be a screw somewhere near the part that holds each beater in place. Loosen the screw, lower the beater and tighten it back up. Please comment back if you need more help
After playing with crappy pedals for years,i had a bit of a hard time adjusting to a pair of actually good pedals - weird but true! But thank you,i've already figured all the settings out and i'm way more comfy with them now :)!
@@JohnG_YT ok very good. I've had experience with the same problem of the bass drum beater hitting my foot while I play on other drum kits for band rehearsals. I learned very quickly to always bring a drum key so I can adjust things and get comfy. I'm glad you figured it out!
Good video Are the beaters on backwards? From the looks of it the rubber and or the white side supposed to be hitting the surface not the round housing?
Thank you :) Yes i have to have them backwards ,because the white sides would tear that mesh head apart in no time. On normal acoustic heads,they would be in a "correct" position (white thing hitting the head) :)
Just got these pedals, out of the box the beaters were beating my foot 🤣 just had to adjust the beater distance, simple fix. Great pedals! Update: although now there is an unbearable squeekiness coming from the springs/pedal board, it's the worst I've heard from any pedal. Oh well...
I bought these about 6 months ago they are a really nice pedal but first thing U want to do is change the beaters they are horrible and yeah I play on Roland... I havnt yet but need to change springs they are not good in my opinion for the price they should be the same as 910 but that's life apart from them maybe a shaft change and the odd lubrication it's a mint pedal for its price range if not one of the best
Pejsek a kocicka 😁😁😁😁😂. Tuhle dvojslapku mam cca 8 let a naprosta spokojenost akorat mi ten kopak na elektronickych bubnech taky lital ze strany na stranu to je hrozny, udelal jsem si z OSB desky takovy oblozeni,za to ustrihl kus karimatky a pridelal to hmozdinkama ke zdi a je klid :-)👍
THANK GOD SOMEONE HAS DONE A REVIEW ON THE 310
THANK YOU SIR
I've been playing it for a few weeks now and it's a really cool pedal for it's price! :)
JohnG. Reacts
Yessir, I’ve been looking for a double pedal for a while now, and although still expensive for me, the 319 looks really promising so thank u!
Just got the pedal and put it on my alesis kit..did u figure out a way to keep the pedal on the kickpad??? After i play double bass for a few mins it slides off the kick pad..very annoying!!
What about comparison with pearl 932?
They are kinda loud..?
That was an issue with my bass drum pad that i fixed later. Pedals themselves are fine :)
@@JohnG_YT You never bothered to use like those tennis ball risers? Is your room at the ground floor?
@@daemon3spade I have my drums in the basement,so i do not have to worry about noise. Those raisers are handy for people in flats,but my issue was about pedals hitting the metal "holders" that you thighten to the base of the bass drum pad. I cut out a bit of the "base" of the bass drum for the metal holders and that solved my problem.
Not picking on alesis directly but...many e-kits that comes with those awful kick towers. i could see it shaking as you played it. I hate playing a moving target and got rid of mine. You really would do better with a used Roland kd-120 kick. They have better response and are totally solid.
I do have to agree there. I completely replaced this one with a Roland KD-10, since i'm on bit of a budget and while it's still not perfect in terms of stability, it's so much better than the Alesis one.
You can stop the beaters from hitting your foot with some adjustments to the pedal with a drum key. It's not your feet ;) There's an adjustment you can make to angle the beaters closer to the bass drum. Also, you can make the beaters shorter. You just need a drum key to loosen these screws one of them should be above the spring. Loosen it and angle the footboard so the beaters are closer to the bass drum, the tighten the screw again. To make the beaters shorter, there should be a screw somewhere near the part that holds each beater in place. Loosen the screw, lower the beater and tighten it back up. Please comment back if you need more help
After playing with crappy pedals for years,i had a bit of a hard time adjusting to a pair of actually good pedals - weird but true! But thank you,i've already figured all the settings out and i'm way more comfy with them now :)!
@@JohnG_YT ok very good. I've had experience with the same problem of the bass drum beater hitting my foot while I play on other drum kits for band rehearsals. I learned very quickly to always bring a drum key so I can adjust things and get comfy. I'm glad you figured it out!
Thank you for the information 😃👍
Good video
Are the beaters on backwards?
From the looks of it the rubber and or the white side supposed to be hitting the surface not the round housing?
Thank you :) Yes i have to have them backwards ,because the white sides would tear that mesh head apart in no time. On normal acoustic heads,they would be in a "correct" position (white thing hitting the head) :)
Alesis crimson 2?
Yep!
3:55 povídání o pejskovi a kočičce
Vyčerpávající a informativní komentář...díky 🤦
@@JohnG_YT Není zač.. můžu se zeptat jak pedál drží po 2 letech? a jste spokojen? silně uvažuju o koupi
homies first pedals were on fucking life support jesus christ
Not wrong,lol. Cobras are still going strong!
Just got these pedals, out of the box the beaters were beating my foot 🤣 just had to adjust the beater distance, simple fix. Great pedals!
Update: although now there is an unbearable squeekiness coming from the springs/pedal board, it's the worst I've heard from any pedal. Oh well...
I have the same pedals...I just used some oil to fix the squeekiness
No squakiness at all with my pedals,even today....weird 🤔
I bought these about 6 months ago they are a really nice pedal but first thing U want to do is change the beaters they are horrible and yeah I play on Roland... I havnt yet but need to change springs they are not good in my opinion for the price they should be the same as 910 but that's life apart from them maybe a shaft change and the odd lubrication it's a mint pedal for its price range if not one of the best
Been playin' them for a bit now and they are really good,but yeah...will have to change the beaters soon!
After 2 years what's your experience with 310
Pejsek a kocicka 😁😁😁😁😂. Tuhle dvojslapku mam cca 8 let a naprosta spokojenost akorat mi ten kopak na elektronickych bubnech taky lital ze strany na stranu to je hrozny, udelal jsem si z OSB desky takovy oblozeni,za to ustrihl kus karimatky a pridelal to hmozdinkama ke zdi a je klid :-)👍
Omg your millenium....
Yeah,they were messed up when i got them,lol. Thanfully these pedals are great and still serve me well :)