Honda Accord 2015 VSA / ABS Malfunction
HTML-код
- Опубликовано: 13 сен 2024
- Common problem on most Hondas , If you have all the lights on and VSA malfunction with codes 121-11 / 85-01 etc. Most likely have a failed ABS/VSA Module.
Please support this channel by hitting the like , share and subscribe button !
Snapchat : mustafa-jh
Instagram: mustafajh
Tiktok - mustafa.jh
Email - Mustafajafarh@gmail.com
To everyone asking about follow up and how the repair was done. I lost most video of this videos however ,
The broken wires that you see is the problem , i attempted to solder with regular solder and only worked for a week until it broke again. It needs special steel solder/equipment which can do.
it will solder fine with regular materials, quality soldering iron good flux good solder BUT!!!!! you must remove the goo. There are NO shortcuts, do not use acetone or paint thinner or any nasty chemical. The only way I found to do this is make yourself a diagram of connections. remove all old connections and then the 4 screws and then the board. painstakingly remove all the goo from board and from underneath board. Soft to semi firm plastic brush and denatured alcohol. If you do not remove the goo your joints will be unsatisfactory and failed. This whole process will take a long time but work vs 2300 bucks. I used pieces of copper strand from a awg 12 wire that I tinned. the soldering is intricate and detailed. high heat and quick accurate soldering is required. This was a tough job.I learned these tips the hard way. I pretty much killed my first attempt. Goo must be gone. If not nothing will solder correctly.
@@waltsmith1305 Thank you for sharing the knowledge to help us all.
Will attempt another module as instructed.
@@waltsmith1305 Where are you located? Can you fix my ABS module
What material/adhesive did you use to seal back the housing?? I have the same issue it looks like and trying to gather info to work on it myself. Thanks!
nice video, but i would've loved to see the soldering
also how did you get the casing back on the abs module after you removed it with the blow torch and box cutter?
He probably epoxied it
how did you solder it? can you show a video of the actual repair? thank. you =)
I lost most video of this videos however ,
The broken wires that you see is the problem , i attempted to solder with regular solder and only worked for a week until it broke again. It needs special steel solder/equipment which can do.
Hi i only had the code 85-01 i go stright to abs live data and shows in the solenoid valve (does not monitor) so what the mean is damaged?
Yeah cliff hanger, did it work?
Mmm, so do you fix it?
Hi there! Did it work?
What kind of scan tool is that
It didn't fix the issue, did it? I'm guessing you broke those lines in the process of opening the case.
Literally no point to the video with no follow-up on if the repair worked. Bad enough the repair wasnt even shown. Clickbait
I lost most video of this videos however ,
The broken wires that you see is the problem , i attempted to solder with regular solder and only worked for a week until it broke again. It needs special steel solder/equipment which can do.
Boss