On today’s episode we install a 6” SuperLift Kit for 1980-1996 Ford Bronco @bit.ly/2ZqwsD8 Check out all Superlift Lift Kits: www.customoffsets.com/superlift
@@CustomOffsetsTV I never like the lean, but that Bronco is so clean and that bumper and wheel combo is on point that I don't even mind the lean. It's that good.
Don’t get me wrong I love watching your videos, but i feel like the effort being put into the videos isn’t there anymore. Alls I see is Akron, personal vehicles and then more Akron. I’d like to see more on the different wheel brands you guys Carry. Or show the different set ups you guys seen come thru the shop
Was gunna say something similar. There channel feels like nothing but a big commercial now. I mean I guess it kinda was always a commercial in the sense that they are advertising stuff they sell. But nowadays everything is Akron Arkon Arkon. “This or that” is nothing but Akron stuff and no viewer requests.
Caleb winchester Honestly, the shop has been full of the brands you keep seeing showcased. We hear you however, and we’ll get it switched up for September 🤘🏻 - Fuller
Like I said I love watching the videos and I’m definitely ordering rims from you guys, I’d just like things to get switched up a little bit. Me personally, I’d like to see you guys showcase some hardcore off-road, or xf off-road.
I see people complaining about their alignment when installing a lift kit. How was it for you guys?? I’m very concerned as I am about to install my 6” superlift kit
My 88 didn't have one, it drove fine below 75mph. 80 was just too much wind noise but it was straight. Better shocks helps though; I'd be upgrading those ASAP
@@goitoutdoors : I don't ha e much experience with driving stuff without away bars.. but when I was younger I had a Cherokee with a 8 inch lift and 37s and when we would come out of the woods I would be too lazy to put my end links back on and holy shit hold on man.. it was sketchy.
If youre interested in getting an install done at our shop in Appleton, WI please send an email to info@offsetsgarage.com and they should be able to get you a rough estimate!
Why is everybody so butt hurt by Junior making this bronco into a modern show truck. It’s badass with those wheels, and I like the squat, never seen a squated bronco before.
I need to make some corrections to this video as a Bronco owner, although most of it is correct. Bilstien does offer their famous 5100 series for this truck, which I highly recommend! They work great. I would also get new lifted leaf springs instead of blocks. Better ride height if they’re really old, better ride quality, and the blocks can sometimes be a problem for off-road use.
On today’s episode we install a 6” SuperLift Kit for 1980-1996 Ford Bronco
@bit.ly/2ZqwsD8
Check out all Superlift Lift Kits:
www.customoffsets.com/superlift
It's called a twin traction beam. ....... FOR FUCKS SAKE .......
Squatting 👎👎
Yeah this is Junior's dipshit rig for cruising the Dollar General
Looks like sh^t squatting I agree
Junior... please get rid of the lean..
ToxicHipHop306 yes plz
its his style 🤷🤷
@@CustomOffsetsTV when are the 22x10 chrome arkon Lincoln wheels coming?🤔
@@CustomOffsetsTV I never like the lean, but that Bronco is so clean and that bumper and wheel combo is on point that I don't even mind the lean. It's that good.
His truck his way... plus I lowered my truck 3 in the back and lifted it 3 in the front
Oh snap! That O.J. Bronco is KILLER!!!
Nice work
Love the cholo roll.
How can i build another one equal this
Were I can buy that front bumper
It’s just an oem alumiduty bumper!
That front bumper tho. 👍
More Bronco stuff👍🏽
I’m not a huge fan of the look you went for, but I can’t complain a clean bronco is a clean bronco. Just glad people are keeping them driving
Don’t get me wrong I love watching your videos, but i feel like the effort being put into the videos isn’t there anymore. Alls I see is Akron, personal vehicles and then more Akron. I’d like to see more on the different wheel brands you guys Carry. Or show the different set ups you guys seen come thru the shop
Caleb winchester bro i totally agree
Was gunna say something similar. There channel feels like nothing but a big commercial now.
I mean I guess it kinda was always a commercial in the sense that they are advertising stuff they sell. But nowadays everything is Akron Arkon Arkon. “This or that” is nothing but Akron stuff and no viewer requests.
I agree. I wish they would show more of what comes into the shop.
Caleb winchester Honestly, the shop has been full of the brands you keep seeing showcased. We hear you however, and we’ll get it switched up for September 🤘🏻 - Fuller
Like I said I love watching the videos and I’m definitely ordering rims from you guys, I’d just like things to get switched up a little bit. Me personally, I’d like to see you guys showcase some hardcore off-road, or xf off-road.
Did you leave the factory radius arm bracket
I see people complaining about their alignment when installing a lift kit. How was it for you guys?? I’m very concerned as I am about to install my 6” superlift kit
I didn't even realize yall put a Alumiduty front bumper on the pronco
I have a 89 bronco how did u put that bumper on the front
Do they not make the Arkon Lincoln’s in 5x135 (97-03 f150) because I’ve been looking for about a month and a half and can’t find any on any website
Is this the recommended lift kit to get for a bronco nowadays? im looking for a 4" lift.
This one is pretty good! Check out our suspension kits here!
Customoffsets.com/suspension
That thing has to be terrifying without a sway bar.....
My 88 didn't have one, it drove fine below 75mph. 80 was just too much wind noise but it was straight. Better shocks helps though; I'd be upgrading those ASAP
@@goitoutdoors : I don't ha e much experience with driving stuff without away bars.. but when I was younger I had a Cherokee with a 8 inch lift and 37s and when we would come out of the woods I would be too lazy to put my end links back on and holy shit hold on man.. it was sketchy.
Nice lift for my 91
Where you get that front bumper
its off a 2019 ford f-350!
what size tire is that?
Here you go! bit.ly/30eiQtX
What kind of bumper is that?
19’ F350 bumper!
WhAt kind of bumper is that and can you send link
Straight murdered the bronco 😕 Desecrating the bronco name IMO 😬
something different tho
Big rims with little sidewalls is the ugliest look a 4x4 can have.
What about extended brake lines, extended drive shafts....ect
Would this fit the 92 RWD F150 as well?
No totally different front suspension. Your truck is running a king pin style front axel.
Sorry but I hate the idea of a rim diameter larger the 17 inch for a bronco. The front suspension is called TWIN TRACTION BEAM.
Not what he said.
what does it cost to do this including new wheels etc....is this like $3000 to $4500?
If youre interested in getting an install done at our shop in Appleton, WI please send an email to info@offsetsgarage.com and they should be able to get you a rough estimate!
Whyyy
Not a fan of the squad but I don't mind this one. Only thing throwing it off for me is the chrome. I'd de chrome it. Other than that I like it
Why is everybody so butt hurt by Junior making this bronco into a modern show truck. It’s badass with those wheels, and I like the squat, never seen a squated bronco before.
Right? At least its something totally unique 🤷
I agree everyone has their own style that’s what makes it his... you like what you like but everyone needs their “”OWN”” style
Would love to see a yukon gt
You know something really cool @customoffsets? Making some 22x10 arkon Lincoln chrome wheels for the 2004-20013 f150 😎
love the bronco i wanna base my 91 f150 off of it but I don't have enough money to do anything besides leave it how it is (stock)
Looked good on the reveal until it panned to a side view. Squat looks like total shit on any vehicle.
That was not explained very well at all
Look at them little tiny brakes. He should have done a SAS while he was at it.
I miss the spotlight vids
Should we bring em back??👀
Junior lift the rear back up and put a whole bunch of sound in the back you’ll get your squat back
Is that an f250 bumper ?
@Keith Marple its actually a newer style f250 bumper bro
@Keith Marple That's an alumiduty bumper....
The ass end just doesn’t look right squatting lower than the front
I love it I really do, I'm a bronco owner myself, just don't like the squat, other then that it's a very beautiful truck!
Blumpy ???
😂😂
Who hasn't had a blumpy in a OJ bronco. Antwon knows I have !!!!!
Nice ride and setup bro 👌🏼
I don’t like the wheels
it looks nice with baby squat
I knew Junior was a Homosexual, “Squaty look” < Leveled
hey man, everyone likes their own stuff, right?
That makes no sense
that f250 front bumper is cleean
👌👌
I just threw up in my mouth a bit... ghetto wheels... squat... rear lift blocks... there's a guy in California named David Freiburger. Look him up.
God that looks like shit! Junior stay with fitment industries.
Junior is with Arkon Offroad currently
At least the blonde was good looking.
Why dont they make lift kits for 2nd gen dodge durangos
You let this guy do videos because?
not my taste at all i see a bunch of lets just say the other side of the southern border gottem like that
I need to make some corrections to this video as a Bronco owner, although most of it is correct. Bilstien does offer their famous 5100 series for this truck, which I highly recommend! They work great.
I would also get new lifted leaf springs instead of blocks. Better ride height if they’re really old, better ride quality, and the blocks can sometimes be a problem for off-road use.
Thanks for the heads up!!
How are blocks a problem for off road use ?
Welp im 3rd
1st you should pin me😁