Nice video, good info and suggestions! I've found another that's pretty significant IMO..Mojave lower rear arms at all four corners(lower arms) of the kaiju! They go on pretty easily and add some serious rigidity to the kaiju. You won't have to worry about breaking upper arms anymore😎
Servo horn sway bar arms...I knew next to nothing bout fixing your Rc. Og Kaiju first hobby grade ..if that's considered "hobby" grade. Busted turn bucks and a arms . This videos inspired me to get er back out and rippin again. Thing was mad fun. Reinforce the body for goodness sake lol
I've already done all things mentioned in the video (besides the shock mod) out of necessity as I went. I will add mine ran a little hotter than I liked stock so when I installed the steel spur I regeared the pinion -1 or -2 (I can't remember) and added a fan to the motor. Also Get rid of those dean's connectors! (Pushing the limits on dean's and the disconnect all the time landing jumps)... I swapped to xt90. Been pretty dang bullet proof since.
Razor thanks for the tips! I highly recommend the tbone bumpers is also a great upgrade! I got some of these upgrades and will do the rest that you suggested. Thanks
And another great video… 😉👍🏼💯 I love these videos, a year or so..after he has had the real chance to really get familiar with inch by inch of this RC. Thank you brother😉👍🏼💯
I've actually snapped my front right driveshaft before I even went through 1 battery pack, did a few backflips and when I landed it snapped. Is there any way to get stronger drive shafts or make them stronger? Or is it just bad luck and it shouldn't happen again anytime soon.
Light oil & small/few holes will act the same at slow speeds as thick oil & large holes, but will pack more at fast impacts because the oil can’t flow as fast. Kind of like slapping an open hand on water will smack hard compared to slowly pressing down with your hand.
![Ice On My Teeth - ATEEZ エイティーズ 에이티즈 [Music Bank] | KBS WORLD TV 241115](http://i.ytimg.com/vi/c-n92OgbbwA/mqdefault.jpg)
Nice video, good info and suggestions! I've found another that's pretty significant IMO..Mojave lower rear arms at all four corners(lower arms) of the kaiju! They go on pretty easily and add some serious rigidity to the kaiju. You won't have to worry about breaking upper arms anymore😎
Servo horn sway bar arms...I knew next to nothing bout fixing your Rc. Og Kaiju first hobby grade ..if that's considered "hobby" grade. Busted turn bucks and a arms . This videos inspired me to get er back out and rippin again. Thing was mad fun. Reinforce the body for goodness sake lol
The Lunsford links are a great option as well 👍
I've already done all things mentioned in the video (besides the shock mod) out of necessity as I went. I will add mine ran a little hotter than I liked stock so when I installed the steel spur I regeared the pinion -1 or -2 (I can't remember) and added a fan to the motor. Also Get rid of those dean's connectors! (Pushing the limits on dean's and the disconnect all the time landing jumps)... I swapped to xt90. Been pretty dang bullet proof since.
Nice tips, this looks so cool the body reminds me of the Marui Big Bear truck.
Like the fact you’ve “officialised” the tuning following recent feedback. Could make for a nice series/ playlist in the future.
Razor thanks for the tips! I highly recommend the tbone bumpers is also a great upgrade! I got some of these upgrades and will do the rest that you suggested. Thanks
And another great video… 😉👍🏼💯
I love these videos, a year or so..after he has had the real chance to really get familiar with inch by inch of this RC. Thank you brother😉👍🏼💯
Some great tuning tips their, thank you. On a side note do you intend getting the new Corally Skeeter MT just released a few days ago.
check the latest video...😃
Y'all talking bout jumping it i smashed it up just goin up and down the road
Thanks for the mods man All way from Barbados 🇧🇧
Damn nice, I can't get this aluminum servo horn to fit on to the gear, how'd you do that???
Awesome man, Same kind of ones for the ext. especially the out drives and upper links
thanks, yeah yours and other people's troubles with the upper links got me to make this video
How do the bearing install around the outdrives? I’m looking to do this mod soon.
Great tuning suggestions and video.
Add the swaybar kit and the 10mm wider hex hubs
Cool RC and great mods brother
i just picked a kaiju up last night for 150 usd im pumped was missing 1 wheel
nice buy!
Wow nice, I've owned many over the years and I think this is the best value in 6s rtr market.
Link to the bearings for the out drives ???
Aww yeah, Razor tuned! 👍
The only problem I have out of kaiju is the damn suspension arms front and rear upper suspension arms keep breaking
I've actually snapped my front right driveshaft before I even went through 1 battery pack, did a few backflips and when I landed it snapped. Is there any way to get stronger drive shafts or make them stronger? Or is it just bad luck and it shouldn't happen again anytime soon.
where did you buy your bearings from?
Wouldn't running lighter weight in the rear achieve the same result for the shocks?
Light oil & small/few holes will act the same at slow speeds as thick oil & large holes, but will pack more at fast impacts because the oil can’t flow as fast. Kind of like slapping an open hand on water will smack hard compared to slowly pressing down with your hand.
I put the bearings on the outdrives and the front shafts keep pushing the bearings right off any clue why ? Seems like my front shafts are shorter idk
What size bearing your using
@@sammygonzalez7627 I'm not to sure same size i have on the back ill have to look tomorrow
Want to see you do a comp to the new ext version.
wasn't planning on getting the EXT