Engine Oil and Oil Filter Change - Peugeot 206
HTML-код
- Опубликовано: 20 окт 2024
- How to change the engine oil and oil filter on a 2002 to 2009 Peugeot 206 1.1 litre. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🛠️ Oil Filter ~ amzn.to/3PNBtM3
🛠️ Fluid Drain Pan ~ amzn.to/3yZe0At
🛠️ Engine Oil ~ amzn.to/3cxSpaM
🛠️ Socket Set ~ amzn.to/3OLJzne
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts. 
Авто/Мото
Dude, your better than any garage... And saved me a lot of money,... Merci, Gracias, Danke, Dankjewel
Thank you very much !
I wish also to thank you that you’ve put the right socket size ( 27mm ) I just went to a shop to buy one cuz I didn’t had home and wasn’t sure which size I need. Then I opened the video and found it !
@@s0meOneBG Thanks for watching !
This video is better than any other vids about oil changes!
Thank you !
I have never cleaned the inside of the filter, I will do it at the next oil change! thank you!
No problem 👍
Very professional video and explanation ! Thank you for the great work, the video is for Peugeot but the tips are for every type of car!
Thanks for watching !
Just discovered your videos the other day & gotta say they are great! Thank you :)
Thank you very much !
You're a lifesaver, thanks for uploading this.
You're welcome!
I did this last night. Only thing is, i used an old tray from my oven cooker and it wasnt big enough to hold the oil. I made a right mess on my driveway lmao. I put sand over the spillage and have to clea it yp today. Thanks for the vid though. Easy job.
Oops lol. I hope it's a black tarmac driveway ?.....
@@screwsnutsandbolts no. Its brick lol
Oh dear !......
Gracias a tus videos realizo la mecanica y el servicio yo mismo ahorro dinero con esta maquina saludos 😊
Thank you for watching !
Nice video. Another tip is to remove the oil filter with the drain plug out. When you remove the filter, normally some oil will be released
Thanks for the tip 👍
Surely you should recheck the level of new oil after running the motor a few minutes as the new oil will have refilled the filter housing and lowered the dipstick level?
merci . merci . merci: meme si je ne comprend pas l englais c est genial
Thanks, this was just what I needed!
You're welcome, thanks for watching !
You should put a certain amount of new oil in the filter container to prevent the bushes from working without pressurized oil when starting.
Thankyou. Next time I'll change oil filter by myself
Thanks for watching !
Thank you sir. For the knowledge.
You're welcome !
Very good detailed video
Thanks for watching !
Some sump plugs (my 206) has a 8mm square socket not a hex as here
good job.
love maintenance videos
Thank you 👍
Would you be able to do a video showing the cigarette lighter fuse and running a power tap off that for say some USB ports? Thanks!
I don't do that sort of thing, sorry :)
Great video I have a question when you change the oil filter after you drained the oil why the cartridge of the filter still has oil in it is there some type of valve that controls oil for lifters?
Most filters have some sort of check valve to stop the oil draining out of the filter so the engine gets oil immediately when you start it.
@@screwsnutsandbolts THANKS mine doesnt do that is 206+ 1.6 gasoline i think i might have to check that.
10/10!!!!
Thanks !
thank you very much!
You're welcome!
very similar to 1.1 of citroen c2!
Great video but theres no way I would trust myself haha to do this but at least I know what my mechanic will do when I ask him for a change of oil and oil filter.
Thanks for watching !
El comentario no lleva ninguna carga semántica, sirve de apoyo al canal y agradecimiento al Autor.
Great videos, thank you!
Thanks for watching !
I only have a copper washer with my plug is that the same
is 3 liter oil succifient for that motor ?
how to change the rear sprinkler hose
rear wiper
thanks
turkey
thank you.
You're welcome
Nice
Thanks !
Hello dear.. My cartel nut does not come out at all, it just rotates in place. What should I do? Of course, I used to use Teflon tape, please help
Cartel nut ?, do you mean the sump drain plug ?
You know the oil the first one does it have to say SAE 10W40 on the bottle ? I got some 10W40 fully synthetic is it the wrong one ? I hope not it was 20 for 2 lt 😢😂
It should be fine but It's not recommended to mix different types of oil (syntethic with mineral oil etc.). I would advise draining the oil and filling it up entirely using one type of oil.
@@screwsnutsandbolts I was thinking the same thing and the oil in is nearly black too so iv got rhe haynes manual and I'm going to get a filter and then do a oil and filter change. Thank you for this recommendation.
You're welcome, good luck :)
Veoma profesionalno odradjena zamena motornog ulja! Da li znas koliko litara ulja treba sipati u xsari 1.4i 2002 godiste prilikom zamene? Sobzirom da je kod nje peugeot motor . Pozdrav iz Srbije Beograda
Thank you. This is what I could find:
Citroen Xsara 1.4i (2000-2003)
All Weather: 5W40,10W40, 5W40
Engine oil capacity (with filter): 3.5 L
I found that information here : www.ultimatespecs.com/car-specs/Citroen/4203/Citroen-Xsara-14i.html
@@screwsnutsandbolts thank you
@@screwsnutsandboltsa reci mi koji kljuc koristis za odvijanje srafa na karteru naziv? I koji kljuk koristis za odvijanje kucista filtera?
On the Peugeot 206 you need a 24mm socket for crankcase bolt and a 27mm socket for the oil filter cover, but they may be different on the Xsara
For the 1.9d engine - 4.75 litres
Dopo aver visto il tuo video ho acquistato il filtro per cambiarlo, lo dovuto restituire perchè non adatto alla mia Peugeot 206 1.1 del 2001, dovresti specificare il tipo di motore su cui hai effettuato il cambio d'olio, il mio sul libretto ha la sigla (P.5) HFX e (D.1) Peugeot 2CHFXF, infatti l'asta per misurare l'olio è a sinistra non è come la tua del video.
The video description clearly states 2002 to 2009 Peugeot 206 1.1, not the 2001 model
@@screwsnutsandbolts Ok, non ho letto bene la didascalia sotto il video, colpa mia.
No problem 👍
As a private person what do i do with old oil?
You can bring it to a local recycling centre. They should take it without charge
👍
Hi, do you know the position of oil level sensor for 206?
It's usually down at the bottom left of the oil filter housing. It could be obscured by another sensor wiring and it can be hard to see if it's covered in oil and dirt.
@@screwsnutsandbolts thank you so much, gonna check it soon
Location of oil filter differs from one engine size to another
Is 5W30 also okay?
I would only use the recommended oils shown at 7:34 in the video
So 5W40 would be better?
Yes, 5W40 is fine
What cc engine is this and year
It's a 2004 1.1 liter petrol engine
@@screwsnutsandbolts can I ask does the same engine but a 1.4 use same oil filter tia
@@sparkyt6497 yes. Everything is the same except for the amount of oil in the system
Can you help me brother
You forgot the springs
What springs ?
This kind of filters are stupidest. Best filters are those, places on down part of engine, when you unscrew, it doesnt drop on your engine. This shit will make mess. closed metal filters are much better than this replaceable shit. French never made a car, thats simple to maintain.
🫡✅🔩