Scott😮 installed mine yesterday! Its awesome product. Now i could see again when backing up, such a relief. I drive all the way to his shop and its worth it.The thumbnail looks familiar 😉
Great vid, BUT note that the connector to the oem camera does not have the be removed, only the other end has to be removed. Spent over an hr removing the harness only to find out the AJ harness does not require the oem harness that’s removed.
Thank you for the extra info! That is true however we advise removing it so it is not just dangling in the hatch. Neither way is right or wrong to your point.
Agreed... it was a pain to try to remove it, so I said forget it... it can live in the dangle and if we ever need to re-use the oem camera we can just switch connectors.
I have a 2013 SR5 that had the basic non touch radio, it has no back up camera at all. Does Toyota still run the factory wires and plugs but only install the camera assembly on whatever models? I installed a gracenote OEM touch screen from another model with needed adapters but now need to install a camera.
Is there any way to convert the wiring so that I can run it as a second rear cam? I have the Sony xav-9500 which allows me to run a rear cam and 2 additional cams. I have my front cam for extra cam 1 but my guys at the shop replaced my ream cam with your high mount. I want to use my stock rear cam for reverse and your high mount cam for extra cam 2.
Do you have a troubleshooting guide somewhere? I installed mine following this video step by step, but after installing all of my cameras stopped working. I checked 5 times every step and every wire. When I switch back to the original camera everything goes back to working, but as soon as I switch the wiring to the new camera I get no visual.
@@aidenjamescustoms Yes, I do. It's the 2022 TRD Pro 4Runner. I got your kit from Dirtcom with my trail swing as a package. Are you telling me they sent me a wrong product and it's not compatible with my system?
@@gmkhach1100 the panoramic 360 requires the canbus system to talk to the camera and we are working to create the kit that works with the canbus. Currently, it does not so yes, you don’t have a compatible kit. Let Dirtcom know if this message and we will round back with them as well.
Hello, My Tacoma 2021 rear camera does not work. It does not even show up on my radio display under Setting function. Any advice on how to trouble shoot?
Is this while putting it down? If so, you did not run the harness around the outer “tracks”. Give us a call and we can walk you through checking it. 714-852-3859
I have the white loop intact and the green loop cut, per the instructions this should have removed the gridlines in the rear camera, but they are still present in the image. I have notice when I move the green wire (cut) and the white wire (intact) the image flips from right side up to upside down. This was a recent purchase for the 5th gen 4 runner if that helps. Thanks and any advise is appreciated.@@aidenjamescustoms
Thanks for the detailed instructions! It took us 3.5 hours as complete novices, but with time and patience it worked out well.
Scott😮 installed mine yesterday! Its awesome product. Now i could see again when backing up, such a relief. I drive all the way to his shop and its worth it.The thumbnail looks familiar 😉
Great vid, BUT note that the connector to the oem camera does not have the be removed, only the other end has to be removed. Spent over an hr removing the harness only to find out the AJ harness does not require the oem harness that’s removed.
Thank you for the extra info! That is true however we advise removing it so it is not just dangling in the hatch. Neither way is right or wrong to your point.
Agreed... it was a pain to try to remove it, so I said forget it... it can live in the dangle and if we ever need to re-use the oem camera we can just switch connectors.
Awesome install . Thanks for installing my camera
Is there an updated version of this or is the original still good to go? Thanks in advance
I have a 2013 SR5 that had the basic non touch radio, it has no back up camera at all. Does Toyota still run the factory wires and plugs but only install the camera assembly on whatever models?
I installed a gracenote OEM touch screen from another model with needed adapters but now need to install a camera.
Is there any way to convert the wiring so that I can run it as a second rear cam? I have the Sony xav-9500 which allows me to run a rear cam and 2 additional cams. I have my front cam for extra cam 1 but my guys at the shop replaced my ream cam with your high mount. I want to use my stock rear cam for reverse and your high mount cam for extra cam 2.
Any tips on getting the wire fished along the side of the hatch? I can’t seem to get a fish tape alongside there to pull the wire down
Great video Scott! Instructions worked perfectly for my install. Thanks again
I instaoled a camera and never took out the spoiler. Just connected to reverse tail light
Make sure you get a good connection with the T Tap on the green positive cable. I had to go back and strip the wire after putting everything back!
I had the same problem, the T-tap didn’t penetrate enough. Had to go back and strip it just enough to make contact.
Did you cut the green and white wires?
1:53 popping connector
5:15 remove rear spoiler
Not sure what you are asking?
Sorry, just time stamping the places I need to revisit. Thanks for the video.@@aidenjamescustoms
Do you have a troubleshooting guide somewhere? I installed mine following this video step by step, but after installing all of my cameras stopped working. I checked 5 times every step and every wire. When I switch back to the original camera everything goes back to working, but as soon as I switch the wiring to the new camera I get no visual.
Hello. You stated “all your cameras”, do you have the panoramic or 360 cameras?
@@aidenjamescustoms Yes, I do. It's the 2022 TRD Pro 4Runner. I got your kit from Dirtcom with my trail swing as a package. Are you telling me they sent me a wrong product and it's not compatible with my system?
@@gmkhach1100 the panoramic 360 requires the canbus system to talk to the camera and we are working to create the kit that works with the canbus. Currently, it does not so yes, you don’t have a compatible kit. Let Dirtcom know if this message and we will round back with them as well.
Hello, My Tacoma 2021 rear camera does not work. It does not even show up on my radio display under Setting function. Any advice on how to trouble shoot?
Hello, if you are having an issue with one of our camera's, please contact us at 714-852-3859 and we can assist.
Anyone have issues with the rear window getting stuck halfway?? Where did I mess up?
Is this while putting it down? If so, you did not run the harness around the outer “tracks”. Give us a call and we can walk you through checking it. 714-852-3859
Do you guys make a kit for the 360 View
We sure do! Our kits can now work with the 360/Pano camera systems.
@@aidenjamescustoms Very cool - I'll definitely check out your products again - thanks
Anyone know why my camera works fine and then switches the image upside down. It keeps flipping the image every week or so.
Hello. Check to make sure the white loop isn't sporadically making contact and closing the loop causing the image to flip.
I have the white loop intact and the green loop cut, per the instructions this should have removed the gridlines in the rear camera, but they are still present in the image. I have notice when I move the green wire (cut) and the white wire (intact) the image flips from right side up to upside down. This was a recent purchase for the 5th gen 4 runner if that helps. Thanks and any advise is appreciated.@@aidenjamescustoms
Did you screw into the brake area or just use the adhesive?
The camera comes with 3M VHB tape to mount it.
@@aidenjamescustoms thanks!
No wonder dirt keep coming down from that area when I wasn’t it