Great video. I think you sold me on this controller. Especially with the teardown. The dpad is interesting and impressive. I wish more controllers had good clicky dpads with good diagonals.
Only time will tell this ksilver module is entirely made of plastic and the gulikit one has at least the central stick box made of metal, i don't know how long this plastic parts will last but from initial thoughs the ksilver part is pretty solid, it has the same resistance and feel of traditional sticks and on this controller even the same error % on the circularity test I'd say it's a tie for now
Esse canal é bom demais, meu irmão. Se eu tivesse um emprego que pagasse pelo menos acima do salário mínimo eu doaria uma graninha pra esse canal. Tô ansioso pra ver análise do Flydigi Vader 3 Pro. Parece que a empresa ainda está refinando o app do mesmo para só então fazer o lançamento mundial. Quero só ver se a Gulikit vai ficar para trás ou se vai peitar o Vader 3 Pro. Esse Chitu aí não é pra mim, não tem gatilhos analógicos e eu não gosto dessa cor.
To só esperando alguma resposta da flydigi pra analisar ele Apenas divulgando e compartilhando o video em grupos e forums já ajuda bastante! Valeu demais!
I was sold up until I saw those silicone pads that sit over the mechanical switches. I had a Razer Wolverine Tournament last something like 10 months before I tore the pad. Same style of pad, too, with the rubber dome being a raised solid bumper of sorts.
@@VKsChannel thank you for helping me. Did you check the polling rate of this controller most of the Xbox controllers have 125hz polling which is terrible I'm a PC gamer and have 360hz monitor low polling rate very noticeable for me .
To use this wireless on pc you can use rewasd and connect in switch mode, i had this couple months ago, def wont recommend for pc as its poling rate is like extremely low and lag is very noticable.
Mobapad really needs to fix their face buttons... I heard the cheap bouncing plastic sound the buttons make when springing back at 2:33 ... I really hate that sound, it's the same on the Mobapad Elite as well. When you release the button they make a very bad CLACK plastic bouncing sound that echoes.
This clack sound is actually the sound of the button hitting the plastic walls when your finger release them, its natural and happens even on other premium controllers with a slight difference in sound Heres a comparison ruclips.net/video/cnKEKf7KsMw/видео.html
@@VKsChannel EDIT: Had to remove response and paste it in your most recent post on your Community Page because YT kept deleting it due to me including video links showing some comparisons. I want to thank you for replying and that yes, of course you are 100% correct, however I explain a bit more in the Community Page post.
I had to remove the streamable links because YT does not allow the post to go through. I will post it on your community page if that is alright. Thank you for replying.
Nope, xbox and ps5 are blocked to unlicensed controllers the nintendo switch is open and that's why you see a lot of different controllers working natively with the system
I see we are slowly getting very close to the perfect Switch/PC controllers here and this is great.
Great video. I think you sold me on this controller. Especially with the teardown. The dpad is interesting and impressive. I wish more controllers had good clicky dpads with good diagonals.
Its a good controller but the mobapad M9 is way better overall
I have a review of it too
Its the purple one
Hey VK between M9 and 8bitdo ultimate Bluetooth which is the better choice in your opinion?
@@Curbietann M9, actually I liked the M9 so much that I bought another one in a different color and sold the purple
I love the Mobapad joycon alternatives - the mechanical d-pad and face buttons are addictive
You think the gulikit style joystick is losing out? We have seen a lots more of those nyxi style stick in controllers
Only time will tell this ksilver module is entirely made of plastic and the gulikit one has at least the central stick box made of metal, i don't know how long this plastic parts will last but from initial thoughs the ksilver part is pretty solid, it has the same resistance and feel of traditional sticks and on this controller even the same error % on the circularity test I'd say it's a tie for now
Esse canal é bom demais, meu irmão. Se eu tivesse um emprego que pagasse pelo menos acima do salário mínimo eu doaria uma graninha pra esse canal.
Tô ansioso pra ver análise do Flydigi Vader 3 Pro. Parece que a empresa ainda está refinando o app do mesmo para só então fazer o lançamento mundial.
Quero só ver se a Gulikit vai ficar para trás ou se vai peitar o Vader 3 Pro.
Esse Chitu aí não é pra mim, não tem gatilhos analógicos e eu não gosto dessa cor.
To só esperando alguma resposta da flydigi pra analisar ele
Apenas divulgando e compartilhando o video em grupos e forums já ajuda bastante!
Valeu demais!
Which is the best controller that has switch pro form factor?
I was sold up until I saw those silicone pads that sit over the mechanical switches. I had a Razer Wolverine Tournament last something like 10 months before I tore the pad. Same style of pad, too, with the rubber dome being a raised solid bumper of sorts.
I went for a binbok ultra and a gamesir nova combo instead of this pad all in including delivery £80
12:40
Try pressing home + right on the dpad. It should connect in xinput mode via bt.
It works
But this wasn't in the manual though in the manual it says that this is IOS mode
Just got mine and loving it so far!
Do you know any controller cases that it fits well in?
I have the m9 and hall effect sticks would have been nice, but with the chitu you dont get analog triggers or normal rumble...
How does this Pad compares with 8bitdo's?
Do you know if there may be a phone mount for it that may fit?
I don't think so
Maybe a pro controller mount would fit but I cannot guarantee
But you can probably design one in a 3d printer
@@VKsChannel i ended up returning it. I preffered much more the 8bitdo ultimate and did make a 3d model print for a mount
Heya, do you know where I can download the app?
scan the QR code in the manual
Hey man will do you have the Vader 3 and 3 pro yet? Because I’m hoping it’s going to be good!
No confirmation from flydigi yet =/
This or gamesir t4 cyclone pro ?
I havent tested the gamesir but I believe that thr t4 pro is better
Gamesir nova and binbok ultra
Hows the joy stick tension is it too light like g7 se ? Or stiff because I hate loose tension sticks .
It's definetly more stiff, a little bit more than the first party controllers
@@VKsChannel thank you for helping me. Did you check the polling rate of this controller most of the Xbox controllers have 125hz polling which is terrible I'm a PC gamer and have 360hz monitor low polling rate very noticeable for me .
The only bad thing is that it does not have analog triggers for PC.
Vader 3 Pro when?
When flydigi replies to my mails 😢
Hallo! Deos it get recognized by DS4Windows?.
To use this wireless on pc you can use rewasd and connect in switch mode, i had this couple months ago, def wont recommend for pc as its poling rate is like extremely low and lag is very noticable.
mac mode works too
Mobapad really needs to fix their face buttons... I heard the cheap bouncing plastic sound the buttons make when springing back at 2:33 ... I really hate that sound, it's the same on the Mobapad Elite as well. When you release the button they make a very bad CLACK plastic bouncing sound that echoes.
This clack sound is actually the sound of the button hitting the plastic walls when your finger release them, its natural and happens even on other premium controllers with a slight difference in sound
Heres a comparison
ruclips.net/video/cnKEKf7KsMw/видео.html
@@VKsChannel EDIT: Had to remove response and paste it in your most recent post on your Community Page because YT kept deleting it due to me including video links showing some comparisons. I want to thank you for replying and that yes, of course you are 100% correct, however I explain a bit more in the Community Page post.
I had to remove the streamable links because YT does not allow the post to go through. I will post it on your community page if that is alright. Thank you for replying.
This is the guy who knows
Gahhhhhhhhhhhhhhhhhh no polling rate/latency test! Cmon maaaaaaaaaan!
At the time I didnt do polling rate tests I started doing that for all other reviews
This one is not detected as an X-input controller so the polling rate test tool won't detect it
@@VKsChannel Shame! Thanks anyway, I appreciate you
I really don't like the face buttons on the Mobapad Elite. A real disappointment for me in terms of controllers.
I didn't like it either at the beginning but you can get used to it
@@VKsChannel Do the buttons on the Chitu feel the same as the buttons on the Mobapad Elite? Or do they feel better?
@@JohnSmith-XYZ the M9 has better face buttons, the chitu buttons are too flat, I mean the M9 has flat buttons too but they are worse on the chitu
Xbox???
Nope, xbox and ps5 are blocked to unlicensed controllers the nintendo switch is open and that's why you see a lot of different controllers working natively with the system
You can use it with mayflash or brook adapters. Look for ones that are compatible with xbox consoles.
ayy pikmin music as outro ! a man of culture i see!