How do you make the track play on both sides? I dragged the track to the left side and it plays on the 1 table I have hooked up. This is only for using 1 table btw. SO how do I get music to play on the other side constantly so I can scratch on the left side?
Anyone else having issues with Serato not giving DECK SETUP options with their Scratch? And DVS also not automatically activating? Not finding answers for this issue anywhere. Please help!
Thank you for that video) could you please support. I opened numark, started to play. After my cross fader didn't work in software. It is not switching channel. Where could be the problem?
I'm new and just subscribed to your channel. Just bought this and will be using serato dvs for the first time. Can you take me to the steps on how to set it up scratching in serato dvs?
nice video ... :) . a good mixer to use with serato dj pro ... but not powerful enough to be use in a traditional way ... playing traditional vinyls in through mode gives you a very low volume forcing you to turn the gain knob to the max and barely reaching the -3db signal ... do not expect to play jazz cuts within your mixes with original albums .. Too bad numark don't even mention that particular aspect of the "scratch" . If you have a solution, please tell me, numark 's support team is not really as responsive as serato support team .
No, they don' t. They just work in DVS or internal mode. The only mixer who can apply Seratos Software FX on regular Vinyl right now is the Reloop Elite.
hello i bought one after watching your vid.and i wattched other vids on utube.great for dvs but when you try to play live inputs like my record decks playing records the mixer does not play sound or the mic to obs to stream on twitch.the mixer just goes dead and i cant use it as a normal mixer and 2 decks.numark should say on the box that mic and live inputs will not work on obs and stream apps.sorry i wasted my money on one.
During the intro scratch segment, it looks like you did an 'echo-out' effect without using the fader. Is that possible on the Numark Scratch or is that post-editing?
No post-editing. It was Matt Reay from Numark who did the performance, I'm not sure exactly what he did to create the effect but definitely no clever editing involved!
You can't see it because of the camera angle but he pressed the v-echo button. Looks like if you down-toggle the effect on a cued sample, it will ring out post-fader. I think. I'm here looking for my first mixer, I've never even seen one in real life lol
I cannot get this thing to perform smoothly. I've updated all the drivers, went through Serato's official guide on optimizing my laptop, did my own tinkering... nothing is working. I'm extremely disappointed with buying into the Serato ecosystem. Never had problems like this back in the Rane SL2 days.
What exactly is happening? Had this mixer for 3 yrs and haven't had any problems or negative opinions aside from the software based crossfader and other limitations/missing features.
for this mixer how can i connect my direct mixes on to my phone? there only 2 RCA outs on the back that's available the Master and the Booth but i plugged and tried both but nothing came out
The numark scratch is the worst mixer I've played with. I'm a DJ for more than 25 years and I strongly will not recommend this to any scratch dj or any other dj.its basically a piece of shit and I have proof.
Really would be nice to have the sampler also work in Analogue (for vinyl). Along with all the other effects.
How do I get the fx working 😢 never worked since I bought it 5 months ago
How do you make the track play on both sides? I dragged the track to the left side and it plays on the 1 table I have hooked up. This is only for using 1 table btw. SO how do I get music to play on the other side constantly so I can scratch on the left side?
Can u scroll to the left side to the crates and back to the playlist ? How? ..thanks
can't beat the price for this gem
Do I need a mwm Phase Essential or denon dj ds1 to make 1210 turntables work with Serato DJ? Can I just plug this mixer into the laptop and go?
Anyone else having issues with Serato not giving DECK SETUP options with their Scratch? And DVS also not automatically activating? Not finding answers for this issue anywhere. Please help!
Update ur serato dj with latest version and see,
Is there a function to control my saved Loops?
My cue point buttons on my numark won’t light up need help !
To play this with timecode, is it necessary to use a soundcard or the USB connection does the job?
Just a USB connection!
When paired with the Pioneer DDJ XP2, will the XP2 effects be post fader?
Thank you for that video) could you please support. I opened numark, started to play. After my cross fader didn't work in software. It is not switching channel. Where could be the problem?
Work with virtual dj ??
Please help, Can we use new serato stems feature in this mixer?
We haven't attempted this setup but can look into this for you!
@@BopDJstore please look into it.. That would be very kind..
Yes you can, need to activate and swap a function to STEMs in settings
@@strident2312 thank you so much ❤️
Can somebody help me with the right mapping cause mine is messed up
excelente video hermano saludos desde tijuana Baja California
Can you use it with Rekordbox?
I'm new and just subscribed to your channel. Just bought this and will be using serato dvs for the first time. Can you take me to the steps on how to set it up scratching in serato dvs?
Losing my shit I can’t figure it out either
nice video ... :) . a good mixer to use with serato dj pro ... but not powerful enough to be use in a traditional way ... playing traditional vinyls in through mode gives you a very low volume forcing you to turn the gain knob to the max and barely reaching the -3db signal ... do not expect to play jazz cuts within your mixes with original albums .. Too bad numark don't even mention that particular aspect of the "scratch" . If you have a solution, please tell me, numark 's support team is not really as responsive as serato support team .
im just learning that right now. straight vinyl signal is suuuuuper lowl
@@EasthoodRacing Yeah it sucks. Some 12 inch's are pretty loud, but it's quiet as shit with most records.
One question plz do the effects work with analog vinyl mixing? Thanks great video
No, they don' t. They just work in DVS or internal mode. The only mixer who can apply Seratos Software FX on regular Vinyl right now is the Reloop Elite.
Does the cross fader make that loud click sound whenever scratching?
will it work with virtual dj.
yes it's supported plug & play by Virtualdj 2018
thanks.
Can you use it with cdj?
yes as long as you got the control disc for serato. unless you got one with tone generator
Depending on what cdj ie. Serato supported hardware u can use these HID mode as well
hello i bought one after watching your vid.and i wattched other vids on utube.great for dvs but when you try to play live inputs like my record decks playing records the mixer does not play sound or the mic to obs to stream on twitch.the mixer just goes dead and i cant use it as a normal mixer and 2 decks.numark should say on the box that mic and live inputs will not work on obs and stream apps.sorry i wasted my money on one.
To stream with this I would recommend using the booth output plugged in a second laptop that would be the machine for streaming. But that's just me...
During the intro scratch segment, it looks like you did an 'echo-out' effect without using the fader. Is that possible on the Numark Scratch or is that post-editing?
No post-editing. It was Matt Reay from Numark who did the performance, I'm not sure exactly what he did to create the effect but definitely no clever editing involved!
You can't see it because of the camera angle but he pressed the v-echo button. Looks like if you down-toggle the effect on a cued sample, it will ring out post-fader. I think. I'm here looking for my first mixer, I've never even seen one in real life lol
The FX are post line- and crossfader. I can confirm that since i own this mixer.
@@MakingMadBeats Thank you.
@@chhayrithy You' re welcome.
Is it computable with VDJ?
yes i think so, that is what i intend to use it with. virtual Dj 8 it works with.
what happens if you need to replace an upfader? are they soldered in or easily switched over?
do you need to buy serato?
Serato DJ Pro license and DVS expansion are included, so no
Bop DJ so clubkit expansion is included too?
@@BopDJstore Can I use this with out turntables and still get a good mix going?
I cannot get this thing to perform smoothly. I've updated all the drivers, went through Serato's official guide on optimizing my laptop, did my own tinkering... nothing is working. I'm extremely disappointed with buying into the Serato ecosystem. Never had problems like this back in the Rane SL2 days.
What exactly is happening? Had this mixer for 3 yrs and haven't had any problems or negative opinions aside from the software based crossfader and other limitations/missing features.
Win or Mac? On my Mac, it doesn't output from the Master, but on Windows it's perfect.
Nice Video
nice video!
for this mixer how can i connect my direct mixes on to my phone? there only 2 RCA outs on the back that's available the Master and the Booth but i plugged and tried both but nothing came out
u would have to connect to channel one or two directly then flip the phono/line switch to LINE.
So are you trying to play music from phone to mixer, or record your music from mixer onto phone?
Perfect instructional review...
in add already supported plug & play by Virtualdj 2018
I'll be pissed if the fader bleeds like Numark is known to do.
Crossfader not too clever ,too much gap
The numark scratch is the worst mixer I've played with. I'm a DJ for more than 25 years and I strongly will not recommend this to any scratch dj or any other dj.its basically a piece of shit and I have proof.
Explain why then?
Mine works great love it no issues what so ever
Mine, no issues 3 years