Star Wars R2-D2 Repair Video

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 278

  • @OfflineSetup
    @OfflineSetup Год назад +53

    "I wonder if you knew what you were doing, you could re-program this to say other things like rude words". Kid at heart, never change;

    • @HD-wf3bp
      @HD-wf3bp Год назад +2

      XD but I like it more with the original sounds.

    • @maximusmax4557
      @maximusmax4557 Год назад +3

      I could def hear C3PO telling R2 to "bugger off."

    • @MrAsBBB
      @MrAsBBB Год назад

      What about dressing it up.? A wig? Sorry I am being silly but it would be fun.

    • @ChrisCreates11
      @ChrisCreates11 Год назад

      Please check out my R2 build series then u can how involved this build was over the 2 years

    • @MYTHofficialChannel
      @MYTHofficialChannel Год назад +1

      Guess why it beeps when 'talking'. This kinda fellow already swears like a sailor

  • @potrzebieneuman4702
    @potrzebieneuman4702 Год назад +1

    18:46 I have an Orange Pi PC running Linux, great little board at a fraction of the cost of Raspberry Pi. Interesting to see it used in this model. It's nice to see things being repaired.

  • @flynne9876
    @flynne9876 Год назад +13

    I am about 40 stages through the assembly of R2, this video has given me so much confidence that I will be able to troubleshoot any issues. Thanks. The kit comes with a test board so you confirm the components work before assembly. Really is a nice kit, loads of fun to assemble with the kids.

  • @jeffwalker7185
    @jeffwalker7185 9 месяцев назад +1

    You are a genius Vince. I am in the process of building the Fanhome release of this R2D2 and could not get the light sabre flap to open. Then I recalled watching this video and came back to see how you resolved the issue. I copied your method of using two staples and now the lightsabre flap opens smoothly and still sits flush to the metal housing. Thank you.

  • @TheSkaldenmettrunk
    @TheSkaldenmettrunk Год назад +1

    Now R2-D2 is fully alive thanks to you. To see the HDMI working and showing some cool stuff on the TV was very interesting too.

  • @pherman8852
    @pherman8852 Год назад +1

    Your fixes make my wife and I so happy Vince. Thank you for being the blessing that you are….don’t forget your guitar pick.

  • @marcellipovsky8222
    @marcellipovsky8222 Год назад +28

    Hi Vince, I love the robot! You might use some hot glue for the connectors to hold them in place. In case you need to remove them a bit of IPA helps to loose it up.

    • @Mymatevince
      @Mymatevince  Год назад +9

      Very good idea Marcel. I used to hate hot glue as it was a nightmare to remove until I realised IPA actually makes removing it enjoyable. I normally try to get it off in one whole blob...and then it can be reused again. The process feels like a stress relief toy. Hope your keeping well👍

  • @uvgotredonu
    @uvgotredonu Год назад +42

    It should be noted, this is a full scale R2 unit. Vince is just an absolute giant in repair entertainment.

    • @mannixmd
      @mannixmd Год назад +2

      In his last video it's said it's 1:2 scale ;)

    • @alha3869
      @alha3869 Год назад +1

      I don't think Kenny Baker would fit in that so no way full size.

    • @uvgotredonu
      @uvgotredonu Год назад +3

      I know of at least two people that missed the joke

    • @michael5089
      @michael5089 Год назад

      ​@@uvgotredonuI must be thick as I missed joke as well!!!

  • @etiennevanharen3893
    @etiennevanharen3893 Год назад +4

    great video Vince, love the r2d2. thanks for having me think "vince don't forget the blue plastic thingy that fell in" for about 25 minutes.

  • @lkswift
    @lkswift Год назад +15

    Re: the Orange Pi… you’ve got it right. A USB or Bluetooth keyboard and mouse would be attached for debugging. Also, I agree that it’s probably the brain of the whole thing. It would be overkill to just control LCDs on the head.

  • @bigstak2010
    @bigstak2010 Год назад

    I only discovered your channel a week ago and I'm addicted. Your knowledge and logical process is a joy to see. From your reactions in this pair of videos, I'd be surprised if your children ever get to see R2D2 again 😉

  • @MichaelBritt23
    @MichaelBritt23 Год назад +1

    R2-D2 ASMR. Vince has found a corner of the internet that we all wanted to be a part of. Even down to the pop sound from removing the neck brace.

    • @Mymatevince
      @Mymatevince  Год назад

      🤣 How nice was that pop sound!!!!!!

  • @Mcqlfc
    @Mcqlfc Год назад +3

    I always thought that these weekly build it yourself magazines were a rip off but this is awesome!!

    • @I_Don_t_want_a_handle
      @I_Don_t_want_a_handle Год назад

      Usually they are, and the customer service is ropey. It's a reasonable way to get something expensive by spending small amounts regularly. It's a bit like HP! Like HP, it's expensive compared to the 100% outlay.
      Missing an issue can be a nightmare. They offer back issues, but only if they have them in stock. If they sell out of an issue, you are in trouble.

  • @sibriers5254
    @sibriers5254 Год назад +3

    Hi Vince, only just found your channel and subscribed last night, I'm building this very same R2 D2 at the moment for my son, I'm on magazine 91-95 so almost finished. I found your video really useful. Brilliant. Been building R2-D2 for almost 2 years now. 😎

    • @binkman853
      @binkman853 Год назад +2

      Good luck. This looks awesome!

  • @greamepenney5947
    @greamepenney5947 Год назад +1

    Best video so far. You fixed R2
    May the force be with.

  • @proesterchen
    @proesterchen Год назад +5

    LOL @ Vince getting completely mesmerized by the sound the shaft makes when pulling out. 😂😂

    • @francoispapadakis76
      @francoispapadakis76 Год назад +1

      Yep, reminded me of Mr. Bean discovering the carton drawing containers...

  • @dash8brj
    @dash8brj Год назад +2

    Lovely to see R2-D2 back together and working properly. I could see you dropping that guitar pick inside. Going... going... GONE! :)

    • @andrewmurray1550
      @andrewmurray1550 Год назад +1

      that's what prevented R2 from showing Luke Leia's hologram message. "you've got something stuck in here real good".

  • @vapermyke
    @vapermyke Год назад +4

    Well done on completing Vince. Was looking forward to this after you told me via email.
    Im by no means an avid Star Wars buff but as we spoke about in out emails back and forth I am a massive smart home/automation need and this would be so cool if you reprogram aspects of him to work with Google Home/ Alexa especially with the camera integration.
    Massive respect to your work as always. We'll done.
    Myke

    • @Mymatevince
      @Mymatevince  Год назад

      Cheers Myke. Yessss an Alexa R2D2 would be quite easy. Maybe an Echo Show with the screen popping out of his back to play RUclips vids etc. Would be something

  • @BuyitFixit
    @BuyitFixit Год назад +11

    Another Great Video Vince! Ingenious use of staples, and glad you got the long LED working even though it was just a loose plug! I especially liked the debug mode, it's my kind of thing! I would think either a USB touch screen? or keyboard / mouse would be needed to access it. Hope your finger is doing better!

    • @Mymatevince
      @Mymatevince  Год назад +1

      I reckon you could work some of your magic on one of these Mick 👍👍

    • @BuyitFixit
      @BuyitFixit Год назад +1

      @@Mymatevince Oh yes.. I'm sure we could have it swearing like a pirate in no time 😂😂😂

    • @Mymatevince
      @Mymatevince  Год назад

      @@BuyitFixit 😂🤣🤣

    • @kawikajones9436
      @kawikajones9436 Год назад

      That "debug" mode has me curious now. It would be great to have this be able to program also on this. I'm building this model now. I know there are some toys like "Optimus Prime from Transformers where you can program him to do all kinds of things like situps, martial arts kicks etc... If you haven't seen this yet, this is a real transformer. It actually transforms into a truck and back into Optimus Prime with just commands from your phone. It would be great to see if we could do this on this model also. You could trade movements with other's that have a particular model that have created their own movements. ruclips.net/video/ytI929g4puE/видео.html

  • @Scotty_in_Ohio
    @Scotty_in_Ohio Год назад +6

    Love the video Vince - I was hoping for the follow up! In terms of Raspberry Pi vs. Orange Pi - Raspberry had sever supply chain issues over the past 3 years and when you could get what would normally be a $75 Pi 4 it would be upwards of 2 or 3 times the price and sold from an untrusted source. I think that companies weren't necessarily trying to put Raspberry Pi out of business or flooding the market with cheap knock offs but providing a lot of hobbyists a way to work on their projects. I think that Raspberry is just now _starting_ to catch up with demand and supply chain issues - hopefully so.

  • @snowysnowdon5584
    @snowysnowdon5584 Год назад +1

    Great video Vince, the Orange Pi is the result of the Clone Wars. Had to get that one in. 🤣

  • @DavidJaskola
    @DavidJaskola Год назад

    Hi Vince I love your fault finding on R2D2 it just goes to show sometimes it’s just a simple fix

  • @GregorydavidMck
    @GregorydavidMck Год назад +1

    For something like that wee hinge, you could also use paper or thin cardboard, like a cereal box, as a shim. Cheers from future Greg.

  • @Fifury161
    @Fifury161 Год назад +5

    I signed up for a few magazine projects back in the day - the Robots one was a kit before the Pi or any of these small compute boards where a thing so the controls where all made with discrete components. Quite an achievement given the era. £8.99/week is quite expensive, but the end result does look good!

  • @TBL_stevennelson
    @TBL_stevennelson Год назад

    100% love you pointing out the Dangers of Thoses batteries.

  • @vcancer
    @vcancer Год назад +1

    I have been getting the kits of this to build him but have been waiting for all of it to show up. Within these next few months, I think I'll receive the 100th kit. I will be going out on leave from work for a total knee replacement in June, so I think I'll start putting mine together in between knee therapy. Thanks about the battery problem as I'll be making sure to get them with the nibs.

  • @andreamitchell4758
    @andreamitchell4758 Год назад +2

    10:20 you could have just got a hole punch and punched out a bit of the blister pack from that super glue package or some other blister pack plastic and then got a Dremel and drilled a hole through the bit of blister plastic that was punched out, or just cut a tiny square and cut he corners off off and made a hole in the middle
    blister pack plastic makes good washers in a pinch and I bet you can find different thickness plastic around the house no problem.

  • @jcreazy
    @jcreazy Год назад +1

    Hey Vince, the Raspberry Pi was designed to be a cheap and mostly open source computer to give everyone the chance to have a computer.The raspberry pi pico is even fully open source. Orange Pis and many other of these computers are open source. They are meant to be tinkered on and improved. Open Source is amazing.

  • @paulmitchell1099
    @paulmitchell1099 Год назад +1

    Thoroughly enjoyable view of both videos. Really lucky buy.

  • @eugenerusselnash
    @eugenerusselnash Год назад +1

    Heya!
    I just came across your channel. Very interesting especially with the short and long LCD Display Units. The Long Display is correctly at the rear, the short one, However is the Round LED in the Front. The Stacked LCD Display next the Round LED Display is actually R2's Processor Display that indicates his calibration as he's powering up or charging while switched on. The Lightsabre Unit unfortunately has a hinge that has to be loosened slightly so attain functionality. The connection in the rear panel power's R2's speaker. I will continue to watch! Enjoying the Show.

  • @michaeldoak3299
    @michaeldoak3299 Год назад +4

    Just a quick note.. the two silver vents on the front ( centre vents ) are upside down.. just sayin' 😃

  • @miro_trendafilov
    @miro_trendafilov Год назад +1

    Yes! Another R2-D2 video, loved the first one! Also, those magazines are amazing, would love a full set.

    • @jameshhilton
      @jameshhilton Год назад

      I have the full set, built it every month but like many others there are faults, mine being the sensors are not working properly so he just keeps crashing into things, lol

  • @johnrutherford4276
    @johnrutherford4276 Год назад

    Thank you for all your videos Vince. Particularly enjoyed these ones & hope you decide to keep R2D2, it’s so good! Speedy recovery of injured finger 👍

  • @NeonNightmares
    @NeonNightmares Год назад +5

    With all the magazines that came with it there are probably some information about the orange pi and what you can do with it.

  • @gavinm894
    @gavinm894 Год назад

    You know I gave this subscription a cursory look originally and dismissed it after assuming it would be plastic rubbish.
    I'm amazed at the quality of it! Damn!

  • @human7656
    @human7656 Год назад +2

    From my understanding orange pi is a single board computer that can be programmed on board if you connect a keyboard and mouse but you need have the correct software on it. I think they used an SD card with the r2d2 firmware and inserted it in the pi to flash the firmware. I think Vince found a development/debug interface for the people manufacturing the magazine.

  • @deadalusshadowduck
    @deadalusshadowduck Год назад

    Damn... I love that thing! Thanks for showing us R2 againe Vince! 😍

  • @KrisDouglas
    @KrisDouglas Год назад +4

    The Orange Pi is an ARM based single board computer, as you say a clone of the raspberry pi, running Linux. You can use a micro USB to full size USB adapter to plug in a keyboard/mouse in and control the interface that way. Ctrl+alt+f1 or f2 should also give you a full Linux command line where you can browse around the operating system.
    As you say, the build quality of this is very impressive, and considering its a magazine build, I don't honestly think the price is that obscene.

  • @desmondduffy8105
    @desmondduffy8105 Год назад +1

    Hi just came across your channel. My son built this when he was 12. I bought all the magazines 100 and saved them to give as a Christmas present. Took him 4 days to build it fully. Sadly whilst plugged in charging smoke stared to come from the head. Turned out the light saber motor burnt out. Hoping to try and repair this year. Also my projector never worked. Sound and light but no image 😭. Just manged today to get a replacement but £43. Worth it if now works. Will let you know when I get the time to look at it l as later this year.

  • @Ckpe4
    @Ckpe4 Год назад +7

    Actually raspberry pi is mostly open source. It is ment to be "copied" (is open source it called fork). And the orange pi is open source.
    There also is a Banana pi and a whole bunch of another pies.
    They have different set of form factors, different processors and other hardware. For example banana pi has a board for DIY router based on similar to raspberry pi hardware

  • @Bradenjoseph1
    @Bradenjoseph1 Год назад +1

    Vince maybe look at the magazine for the week the orange pi was installed maybe there are some instructions !!

  • @kiphakes
    @kiphakes Год назад +5

    I WANT ONE!!! What a fantastic toy!

    • @stevebrown1974
      @stevebrown1974 Год назад +1

      I have one and it's awesome. Was great fun to build!

  • @599miata
    @599miata Год назад

    Great video Vince. I am not a R2-D2 fan but it was fascinating.

  • @Tim_3100
    @Tim_3100 Год назад +1

    Been looking forward to the repairs on r2-d2 only thing i can think of that would have tiny washers is rc car kit parts/ spares kits you can buy

  • @burtbaxter6485
    @burtbaxter6485 Год назад +2

    Long LCD not LED, loved the video , screamed every time you said LED 😢😂😂

    • @densis007
      @densis007 Год назад

      Came here to check if I was the only one 😅

  • @Sheevlord
    @Sheevlord Год назад +5

    I had an Orange Pi actually. It has a USB port so you can connect a USB hub and a normal keyboard and mouse to it, as if it was an ordinary computer. Too bad I misplaced it somewhere.
    As for the lightsaber door - in the movie it slides open on the inside of the head. Which would probably be harder to implement in the model, so they went with a simpler design that swings open

    • @Mymatevince
      @Mymatevince  Год назад +1

      Thanks Sheevlord👍👍👍

    • @SimonEllwood
      @SimonEllwood Год назад +1

      The HDMI looks like a debug screen made by the developer to control everything from a mouse.

  • @phreapersoonlijk
    @phreapersoonlijk Год назад +1

    Vince, I know you'd either buy the right cells or use magnet spacers, don't worry about that.
    My worry is about people who didn't know the foil was very temporary, and copy you on that part, or people who just kinda scrub through your video, saw that part, thought it was a solution and copied it. Not everybody understands that these video's are meant for entertainment only, and are maybe a bit dense and saw the foil worked, and thought: hey, solution to my problem ! :)
    I never thought you yourself would do this for any length of time or any sort of even semi permanent solution.

  • @KraftyLive
    @KraftyLive Год назад

    Fab video again, love this series of R2D2 videos, I would check if you can remote into the pi boards ip address on you local network via a browser and control the UI you see on the hdmi output. if not i would be looking to connect a keyboard and mouse to setup a remote desktop service to enable that same kind of functionality.

  • @cjmfebruary
    @cjmfebruary Год назад +1

    Greetings, I believe in the film the blue trapazoid shaped hatch recessed and slid open for the lightsaber to be laumched out versus just opening like a hindged lid. It would have been nice if this had those options, but it would have definitely increased the price considerably. Awesome fix! Thanks for doing this video!

    • @SqualidsargeStudios
      @SqualidsargeStudios Год назад

      As far as I remember it did just hinge open, then again it has been a while. Certainly gonna rewatch the old movies again soon

  • @mopagemo
    @mopagemo Год назад +6

    I'm quite sure the Orange Pi is the brains. It seems to be the Orange Pi Zero Plus2, which has 8GB eMMC flash and also a SD card reader. I wonder if they pre-flashed the eMMC with the software for the robot. Either way, you can definitely connect a keyboard and play with the UI. If there is a SD card (it would be on the underside) you can check on a computer what's on it. Most likely it's formatted as the ext2 (or ext3/ext4) filesystem and should be readable by at least Linux or a Mac. If there is no SD card the software will be on the eMMC. You can flash a SD card with Linux (the orange pi website has an image and instructions), put it into the Orange Pi, boot it and then mount the eMMC and look around the files. Requires a bit of knowledge working with Linux and navigating with command line tools, but you'll very likely be able to mess with the sound files :)

    • @Mymatevince
      @Mymatevince  Год назад +1

      Thanks for the info 11xY. The SD card slot is empty on this one so it must be on the flash memory 👍👍

  • @Cha-chingWV
    @Cha-chingWV Год назад

    Vince, as you are trying to take out that bend, I was thinking about the watch and all the other things where you wish you left well enough alone. Glad it worked out though!! This is a cool fix!

  • @frankowalker4662
    @frankowalker4662 Год назад

    So cool that you got it all working.

  • @UltimatelyEverything
    @UltimatelyEverything Год назад

    Legend says Vince is still playing with R2-D2 to this day

  • @andrewd4906
    @andrewd4906 Год назад +2

    Orange Pi is a single board computer like the Raspberry Pi. There are lots of different SBCs on the market. It was probably easier to utilise an SBC rather than design something from the ground up.

  • @geraldfast3d
    @geraldfast3d Год назад +1

    Thanks vince.. Super model.. And great repair video.. May the force be with you..

  • @thegees
    @thegees Год назад

    love the use of the pro tech toolkit in these vids, ive had mine for a few years now an its great

  • @wisher21uk
    @wisher21uk Год назад

    Brilliant fix Vince , that’s a gorgeous bit of kit well done

  • @StevenIngram
    @StevenIngram Год назад +2

    I thought the kinds of things that were wrong with R2 were really fair. Nothing major, but intimidating enough to keep someone from tearing into it. But in the end, just some usage faults that weren't real damage, but just needed to be poked at a little. I love this R2 though, its really bad ass. And its funny how people's perception of things differ. I try to keep track of the single board computer market and when I saw an orange pi in it, I was like wow - they gave it teeth. LOL (The OrangePi is faster than a raspberry pi in megahertz as you mentioned, its RAM is also faster. And the OS in your R2 is apparently booting from an eMMC module rather an SD card. So, faster boot times, faster load times, faster ram, faster processor, faster sensor polling and faster response times. The OrangePi is aggressive. LOL

    • @Mymatevince
      @Mymatevince  Год назад

      Cheers for the info Steven. Up until this video I had never heard of it👍👍👍

  • @kiphakes
    @kiphakes Год назад +3

    I reckon you could probably just plug in a usb keyboard and then be able to move around that on screen interface.

    • @Mymatevince
      @Mymatevince  Год назад +1

      I'll have to try that 👍👍

  • @andrewtomlinson5237
    @andrewtomlinson5237 Год назад

    I enjoyed that at no point did you consider referring to the stack of magazines they sent you, that explained how it all fit together and worked in order to find out for yourself!

  • @Nikke-Nakke
    @Nikke-Nakke Год назад +1

    @10:25 I was 100% sure that Vince would take the metal washer thingy from that E.T. cards corner :D

  • @danke4051
    @danke4051 Год назад

    You would connect via ssh or vnc for remote desktop to use the orange pi as a remote computer. You would also be able to look around the file system and probably the mp3 files to change the sounds.

  • @adelestevens
    @adelestevens Год назад +8

    To make shim washers.
    Drill the correct size hole for the screw into that hard plastic cover material on the super glue packet(or similar type) and then use a hole punch (like one for ring binder folders) and make as many as necessary to "shim up".
    Great also if you need insulator shims.
    Learned this on model railway stuff.

    • @chronos1002
      @chronos1002 Год назад +2

      You can also use plastic playing cards, or cardboard ones for that matter.

  • @lukedavis436
    @lukedavis436 Год назад +1

    vince is a man of taste, he has the same "multiple tip laptop charger" as me XD

  • @nleseul
    @nleseul Год назад +1

    Most likely, the original designer used that debug interface to test the motors and such before the iPad app was developed and the wifi control was set up.
    You could probably connect a wireless mouse dongle to the Pi board and control it with the head closed. There might also be HDMI touchscreens out there that you could hang out the side and not have to be tethered to a TV.

  • @Davejazz
    @Davejazz Год назад +1

    Good job 👏 👍. Would be good for next video where u connected it to a keyboard and change a few things like voice or lights

  • @DEmma1972
    @DEmma1972 Год назад +2

    Love the staple fix. Should be able to reprogram it with new sounds if you know what you are doing. Wonder if anyone has painted it black to make an imperial astromech droid. If you had a 3d printer, you could create a restraining bolt for him/it.

    • @Mymatevince
      @Mymatevince  Год назад +1

      The staple unintentional blended in nicely and worked a treat. Other comments suggested making a shim with a drinks can. Probably a better idea to be fair 👍👍👍👍

    • @DEmma1972
      @DEmma1972 Год назад +1

      @@Mymatevince yeah, can shims would work also. You only have 9 other digits to slice off :)

    • @Mymatevince
      @Mymatevince  Год назад

      @@DEmma1972 😂🤣

  • @Federiklion
    @Federiklion Год назад +4

    Could the dent have been intentional? If you remove the lightsaber and then close the little flap without putting the lightsaber back in, you would have a hard time opening it up the flap again. So the little dent would allow you to stick a fingernail to open up the flap again maybe. Not sure about it, I just think it would make sense. Great fix by the way!

    • @jameshhilton
      @jameshhilton Год назад

      No the dent is not intentional, should be perfectly matched to the rest

    • @AnxiousDavid
      @AnxiousDavid Год назад

      i think it is totally possible the original owner put a dent in to be able to open the flap by hand.

    • @dash8brj
      @dash8brj Год назад

      In a situation like that you could simply pick the model up and tip it on its side while supporting the head and the flap would open up. as long as you are careful putting him back down the flap should stay open so you can put the lightsaber back in. ab extra servo would have made the design slightly more elegant, but that would be prone to breakage.

    • @kenspalding9775
      @kenspalding9775 Год назад

      Or just use a piece of tape to open it, just use something easy to remove.

    • @AnxiousDavid
      @AnxiousDavid Год назад +1

      yeah not saying denting the thing would be the best way to do it just that i have seen people do way worse to things when trying to get them to work.
      If the flap was getting stuck before the dent ever happened the original owner could have just been trying to pry it open and dented it too.
      With how easy vince was able to bend it back the metal obviously was quite malleable there.

  • @magnets1000
    @magnets1000 Год назад +1

    @17:55 didn't expect to see an Orange Pi in there!

  • @bamboozledsoftware
    @bamboozledsoftware Год назад +1

    I wonder if the code for the Pi was in one of them magazines and the original owner got to program it. It would be interesting to modify it to do other stuff. Good video either way.

    • @solospirit4212
      @solospirit4212 Год назад

      R2 definitely comes programmed.. no typing required to get it working.

  • @evilutionltd
    @evilutionltd Год назад

    A quick tip for the people who are technical enough to modify 18650's without blowing themselves up. To convert a flat top to a button top, get yourself some 6mm x 2mm neodymium magnets and put one on the positive end of the battery. A dot of super glue can also be a good idea to stop it sliding.

  • @javawaguk
    @javawaguk Год назад

    brilliant video as always!
    just to say, i wonder if the HDMI interface was a way to test the robot before it was fully built? i had the “Real Robots” Cybot in the early 2000s and before you’d built the remote controller for it there were a number of buttons and switches on the board itself to change modes and test features out!

    • @andymouse
      @andymouse Год назад

      The HDMI port is for video, the Orange Pi is one of many Single Board Computers (SBC) it's not for testing anything it's just there as an available feature that all SBC's have (sometimes more) that little board can run windows and give your PC a run for its money, in fact it's the 'brains of this whole droid.

  • @GadgetUK164
    @GadgetUK164 Год назад +2

    The force was with you on this one!!! I always said you were a jedi repairer! That video output - I suspect if you had a keyboard connected up to the USB you could interact there!

  • @stephenjames8256
    @stephenjames8256 Год назад +1

    you use a wireless keyboard and mouse the USB is normally to power outside of the robot and it outputting the os on the pi used to program it and test it

  • @abn0rm1
    @abn0rm1 Год назад

    Pretty sure you could mess with the orange pi and sounds etc, not sure if it's secured/encrypted or anything, but if this is a orange pi zero plus2 board, it contains an 8gb eMMC, i would think that's where the software is located. What a cool little bot

  • @arghjayem
    @arghjayem Год назад +1

    19:50 LEGO is thriving these days. A huge increase in profits over the past few years, thanks in part to an increase in sales to AFOLs (adult fans of LEGO) during the pandemic rediscovering the hobby and that LEGO builders show on E4/Channel four. I mean just look at how many LEGO YT channels there are and how many LEGO sets cost £400+. They’ve just unveiled a new one in that price category, a Lord of the Rings Rivendell set with over 6000 pieces cost £500. They also have things like a giant version of the Titanic and a massive ATAT from Star Wars!

  • @andymouse
    @andymouse Год назад +1

    Open the box and look inside, oh look there's an SBC and Vince fell into the rabbit hole....cheers.

  • @markstevens5442
    @markstevens5442 Год назад

    With reference to Meccano - it was announced on Friday that the last remaining dedicated Meccano factory is to close. It is in Calais. Meccano will still be made in other factories alongside other toys.

  • @eathenalexander2836
    @eathenalexander2836 Год назад

    great video Vince. well done.

  • @fallwitch
    @fallwitch Год назад

    Great job! Chewbacca would be proud!

  • @TerryLawrence001
    @TerryLawrence001 Год назад

    Selling a device without the lithium batteries is a good practice since it removes any fall back on you if the end user does unsafe things with the battery pack.

  • @mr.behaving
    @mr.behaving Год назад +1

    Does the ipad display not SAY "Short LCD", not Short LED ?

  • @chefhawk
    @chefhawk Год назад

    Great video. Loved building mine and I repainted it as I was building...cheers

  • @LuisVazquez-hx3bk
    @LuisVazquez-hx3bk Год назад

    I am building my own from Fanhome sucription.
    The mistakes I made was putting parts backwards.
    The only problem with the manufacturer is that they don't lable the screw packets.

  • @chezsnailez
    @chezsnailez Год назад +1

    Did they make a K-9 for us Doctor Who fans? (with a pop-up sonic screwdriver?) Or a Dalek?

  • @solveit1304
    @solveit1304 Год назад +2

    You could connect USB keyboard and mouse to OrangePi and play with it. Debug mode sounds interesting.

  • @Bourbon_Blue_Devil
    @Bourbon_Blue_Devil Год назад +1

    Could that HDMI port have anything to do with the projector for the hologram?

  • @peter81richardson
    @peter81richardson Год назад

    I'm sure you could use a keyboard on it and may be able to connect to it by fttp over your network from your computer.

  • @Boogie_the_cat
    @Boogie_the_cat Год назад

    Aside from the fire dangers of lithium batteries, having seen one in person, I'd say for an indoor fire, the bigger danger would be poisoning from the huge volume of toxic smoke that would literally fill the room you are in, which simply adds to the danger of the fire.
    Most folks (I would hope) are aware of the possibility of fire, but the smoke is incredibly dangerous, much moreso than the smoke from say: a nickel metal hydride battery fire.

  • @rivards1
    @rivards1 Год назад

    I suspect there is a way to either usb-connect or bluetooth connect a keyboard to that Orange Pi, and then you could control the menu with that.

  • @Dr.-Smart
    @Dr.-Smart Год назад

    i believe there is a infrared remote for it or try if( it has a usb port somewhere a generic usb mouse) , deagostini collector kits tend to use that
    there was other robot kits like eaglemoss (ultimate real robots "91 magazines") introducing cybot and tom (two cute bug like robots) and later in the 2000s they made "idoid-01" (unknown count of magazines)

    • @mariokuczyk7992
      @mariokuczyk7992 Год назад

      I have an allmost complete Set, certanly quite a cool collection.

  • @Billy.Nomates
    @Billy.Nomates Год назад

    My OCD was off the charts with the staple repair..but it worked still 😁

  • @TheMadrory
    @TheMadrory Год назад

    16:45 I'm sorry, I laughed so much at the "Oops!"

  • @logothaironsides2942
    @logothaironsides2942 11 месяцев назад

    I think the HDMI is just a way to see the OS running in the pi. If you have a usb connector maybe you could use a mouse to get to the menu you are looking at. IF the pi has bluetooth maybe you could use a bluetooth mouse and keyboard with it.

  • @thebasset
    @thebasset Год назад +1

    I so want one of these.. It`s wicked.. i would spend all day playing with it.😃

  • @rbuschy
    @rbuschy Год назад

    I use OrangePi 3 to control my 3D Printer via Klipper. I surprised you got video output via that HDMI tho

  • @VirtualSpeed
    @VirtualSpeed Год назад

    I was wondering if you put the ip address of the r2d2 into the web browser of some computer, if it would show the same interface as in hdmi. Just curious

  • @CTCTraining1
    @CTCTraining1 Год назад

    Why did I never realise that R2D2 sounded like a demented budgie? Great video Vince ... although you are missing an opportunity by not twisting the StarWars film titles into your episode names. 😀👍

  • @bntambridge
    @bntambridge Год назад

    Looks like debug web page output via HDMI. If it has wifi, you could properly connect to it using a computer and control it rather than the app. For debugging.

  • @HavingFunRepairs
    @HavingFunRepairs Год назад +9

    Well at least it wasn't broke in Alderaan places 🤣
    Enjoyed!