Fluid Mechanics | Module 5 | Fluid Flow I Boundary Layer Theory | Part 1 (Lecture 47)

HARDY-CROSS METHOD will be uploaded later.
Subject --- Fluid Mechanics
Topic --- Module 5 | Fluid Flow | Boundary Layer Theory | Part 1 (Lecture 47)
Faculty --- Venugopal Sharma
GATE Academy Plus is an effort to initiate free online digital resources for the first time in India and particularly Mr. Umesh Dhande, Founder and Director of GATE ACADEMY creative in order to shape the best career of Engineering student approaching to B.Tech/B.E. courses.
Check out our facebook page for more details. / gate.academy.plus
Watch out the below mentioned playlists for other videos on these subjects :
1. Analog Electronics --- bit.ly/2IEFMq5
2. Basic Electrical Engineering --- bit.ly/2MuVK8c
3. Electronic Devices & Circuits --- bit.ly/2NcEBBF
4. Engineering Graphics --- bit.ly/2IEGRhD
5. Engineering Mathematics --- bit.ly/2tSsOzt
6. Exclusive --- bit.ly/2KAw0XM
7. Fluid Mechanics --- bit.ly/2tHaQRk
8. Signals and Systems --- bit.ly/2Khihsy
9. Thermodynamics --- bit.ly/2PlxJ5O

[@islahuddin2249]

Gate acadmy is getting better day by days
And one day it will rule all over india

[@te_a_27_riyapatil84]

@Tatum Leonel Is it not illegal?

[@messimagic2527]

Happy teacher's day, sirji !!! India is blessed with magical teachers like you.. Thank you very much sir🙏

[@technicalzone66]

Innovative way of teaching...is the quality of a good teacher...best faculty

[@Sid-se1hd]

Is anyone here before 1st day of fluid mechanics paper 😂😂😂🤣🤣🤣

[@venugopalsharma1945]

Sahi hai bachho

[@pukarupadhyay4240]

✋✋✋

[@kshitijraj461]

Back Bhai 😂

[@ganesh_chavan_0143]

Kia baat hain 😂

[@southievlogs]

Yeah! 😂

[@Saurabh_Jha_]

Honestly i have never seen any video where a teacher has explained in this amazing and effortless manner. keep up the hard work sir👍thank you

[@arjun3533]

Thank u venugopal and dhande sir ,for your such higher level efforts for such awesome lectures with free of cost for unaffordable students...its really helpfull a lot...🙏

[@mayanksharma3793]

Sir phele baar fluid mechanics itni majedar lagi hai sir... Sir apke padane ka tarika bhoot acha h..... 👌👌

[@niranjangachhinamath6190]

Sir, Your teaching is super. It helped me a lot. Thanks to you and your team for making sucg a best educational videos for students

[@Civilsumit11]

Thank you sir for brilliant effort... Waiting for Som lecture series.

[@Prayagraj-Wale]

6:46am and exam starts from 9:30 am

[@engineerspot-umangmishra2405]

No need of worthless collages more efficient and great teacher is present here❤️❤️
Really sir I have no words

[@SandeepYadav-bj1zl]

Best professor i ever seen his explanation levels is peak's

[@manmoji2056]

Germany se MS kr rha hu
idhr vale proffesor se ghnta smjh ni aai
ab apne desi tareeke se hi smjh aati h
jai ho gurudev
thank you

[@zaahee5760]

Welcome welcome sir,, hope next more lectures will come everyday thnxxx brother

[@dhananjaysingh756]

This is the first time I watched him teaching. He is so good

[@Nitesh_Bihar]

Great sir ....the way you deal with the Topic is amazing .
It is really pleasure to have ur vedios on youtube ..
Thanks a lot sir.👍👍

[@amitprakash4826]

To be honest, till today I was not able to understand & consequently teach anyone about the B layer theory...But after watching your lecture I'm now confidenct to make it clear to anyone else in a far better way. Thank u so much sir, thank u.....

[@nikahmad8831]

Even i dont understand in hindi , but still i understand how you show and express the theory thanks alot

[@starktk5932]

your 25 minutes lecture is million time more effective than our uni professor 3 hrs lecture.

[@thenewdimension9832]

Accept that you not good enough to understand your professor.

[@adarshaadhikari5102]

the difference is you were not paying required attention at your lectures in university maybe due to different factors such as tiredness from attending continuous lectures, was not desperate to learn, etc. But since you are desperate to learn here and present with full concentration, you understood everything. The teaching provided here is phenomenal and outstanding and no doubt in it but don't degrade others also. They might also be providing their best for the students.

[@viveksrivastava4856]

Thanq sir kafi wait krna pda boundary layer theory ke liye....😊

[@user-ed1tf6hf5c]

Outstanding sir, मुझे बहुत tough लगता था, अब तो अच्छा और simple लग रहा thanks सर

[@pratikraha7455]

This channel is Great help especially during this pandemic time.

[@singhvikrant]

Best teacher to clear all doubt......great teacher 😊😊

[@Banjaran_On]

Indeed one of the best explanation ever sir💯

[@mdjaidahamad118]

this is so amazing, i have my doubts cleared.....
You are doing a great job sir.....

[@nitinjoshi1565]

I had studied this many time but today only I understand the BLT properly. Thaank You Sir.

[@kkhayrull]

Your teaching method is really outstanding. Thank you !

[@ShabihaNaz]

You are really genus Sir, yor each and every vedio on fluid mechanics are amezing, tomoro is my first DAC meeting or apki vedio se mera pura concept clear ho gya.Thank you

[@priscillapraveena6688]

Awesome teaching of boundary layer concept with animation 👏👏👌..Thank you sir 😊...And one request,, will you please continue fm with turbo machinery also after this😩 bozo it will be useful for ese preperation... Hope you will do sir😊..Thanks in advance..

[@rohitshrivastava9522]

Same here

[@praveensao7708]

Sir, the explanation with the help of animation was great. Thanks alot

[@abhiyantriki139]

Brilliant explanation Sir !! .....But, Sir i humbly beg to differ on few things that you have explained, it's my earnest request to please correct me if i have mistaken anything. Sir, as you said, that the boundary layer thickness is a function of x and that's absolutely correct but is it valid to state that as x increases more mass enters the BOUNDARY LAYER or rather, it is because the region of influence of viscous effects that grows further in to the flow causing more fluid layers to experience the effect of the solid boundary which were initially not affected near the leading edge. Because as per my limited knowledge , boundary layer formation causes energy dissipation resulting in loss of useful energy due to frictional heating and hence the mass flow rate is reduced which ultimately causes momentum and energy losses. Sir please elaborate on this!!! .. otherwise your explanation was very creative and emphatically rational..Great job!

[@shafiqueahmad1796]

Thanks sir it was very impressive lecture,all of my concepts are clear after this licture.

[@artistic-v8411]

Thanks

[@maharudrashinde07]

Sir is back Accha laga video apload kiya thanku sir

[@HemRaj-gi7xl]

Sir your level of teaching is 99.999999% greater then other teachers i have ever seen🙏❣️

[@sejald5340]

Video for Hardy Cross Method is not uploaded. Please do check.
Thank you
For the lecture series, very helpful!

[@nagraj3720]

Very beautifully explained. Even college professor are failed.

[@Radha_Raman142]

Dear sir
Good Afternoon
Thank you very much for sharing such important concepts about boundary layer.

[@chinmaykolekar8008]

Wow sir ,you have explained very well ,I understood everything, thank you sir

[@vikasparmar4015]

Sir Hardy cross method kaha pe hai?????

[@dishankshah5080]

This is just awesome.you are putting so much efforts sir.thank you so much

[@tusharruhela07]

superb explanation , thanks sir....!👌

[@Rahulsharma-mw1yg]

You are great sir, your explanation is excellent like gurpal sir in maths 🍫

[@raunacsen179]

Thank you 😊 💓 ☺ sir for this wonderful lecture 🙏

[@MukeshKumar-dl2yi]

Mind blowing...explanation.....👌👌

[@abdulrahman7390]

Intezar me inteqal hogaya....... 😂

[@utkarshanayak1710]

Thanks for your knowledge. You saved a lot of time 👍❤️

[@lavleendhalla4086]

Many congratulations for great and successful efforts sir.
keep up the good work😊👍

[@tripsography333]

Best teacher of fluid mechanics

[@Indianculturalprotector---]

Really very great video fundamentally
You nailed it here sirji

[@ajinkyasuryawanshi2821]

Sir you are great. Your conceptul teaching is very awsome keep it on sir.

[@kumarbanjara7229]

Thank you for these awesome lectures

[@Vy-23]

very good teaching style

[@anikashama8318]

Brilliantly explained. Thank you.

[@rajivjha.4859]

Gate academy is great academy

[@Mie_Space]

Best video of boundary layer on internet thanks sir

[@sagargujariya5223]

Sir Aapne Bahut hi assi tarhh se explain kiya👌👌👌👌 100/100

[@imsunilkr]

Boundary layer is no more in IES syllabus for mechanical but it is in gate. Good explanation sir.

[@keyurpanchal3299]

Very very thank you sir, aapne thoda practically tarike se samjaya, book me se me padh Raha tha to kuchh samaj Nahi aa raha tha

[@rohit_kumar_7452]

venu gopal sharma is best.

[@venugopalsharma1945]

Thanks dear

[@erabhi5]

One of the brilliant teacher in the world vgs

[@pintuKumar-mq5kg]

hats off GURUJI... best lecture of fluid in any online sources... thanku sir...

[@p...4780]

Salute sir,you are doing new things on you tube

[@civildose3808]

Dear sir....i want to be a teacher like you....

[@Nitishaptitude]

Me too

[@prakhar5376]

better than other paid coaching institutes

[@shivamkr6079]

Surprising...Content Venugopal sir

[@vreejeshyadav5239]

Gjb ka explaination kiye h sir .....

[@msquare6921]

Fully understood concept of boundary layer
Thank you so much sir

[@saadibrahim9919]

Great Explanation...Love from PAKISTAN🥰

[@sonucp323]

Thank you sir... i couldn't understand this on my own. Thanku for the explanation ☺

[@harshdave3420]

It's a easy to understand

[@nileshpathak3370]

Sir plz upload Hardy Cross Method

[@anishkumarsi]

God of fluid mechanics❤

[@gamantanvik5750]

Best video for this concept

[@deepsarkar3260]

Superb!

[@ramanuj5156]

good explaination .....thank you

[@sureshjat9778]

Sir muje aj tk yh topic smj m nhi aya but u r genius today i got it.

[@sumeshsinha1968]

beyond outstanding sir ..God bless you, clss me kuch samajhme nhi aaya tha bt yha aake sab clear hogya ..

[@shahkeyur5446]

Sir agar fluid ki viscosity jyada he to vo boundary layer thickness pe kya effect layegha..... thickness jyada hoghi ya kam hoghi...?

[@pushkarbikramshahi9487]

Brilliant video❤️❤️❤️❤️

[@rabnikantkumar2086]

Sir you are smart and your teaching concept is also smart

[@RASERIES]

Q4.The Prandtl mixing length is
A) independent of shear stress.
B) zero at the pipe wall.
C) dependent on fluid viscosities.
D) constant for all fluids.

[@RASERIES]

please answer fast

[@kash2540]

Wow... What an explanation

[@swapnilkhairnar6414]

Cool...method to teach...

[@subaldoyal3246]

Aag laga di sir!!🙏🙏

[@lokeshlimbu2]

जय होस वेनुगोपाल गुरु जी🇳🇵

[@mechanicalmomentum1172]

thank you venugopal sir...for the expensive video lecture..

[@ashishyadav1035]

Thanks sir
Awesome sir

[@mathisfun2513]

Awesome sir

[@GkWithRaghunath]

Very nice wonderful lecture sir

[@uss969]

Really awesome sir👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@kalpitgupta6026]

Sir Thankyou So Much

[@niktarcoolboy7383]

Dam too good sir definitely I will subscribe

[@skaterjoe1669]

i dont understand hindi but i still understand your teaching. ty

[@nirajmussicgame8274]

Its Wonderfull technique to understand.........

[@kondapalliraviprabhakar3175]

Thanks. now I cleared my doubt about boundary layee

[@yasirahmad5725]

I think it is engineering in most simplest form

[@arjunmohod6022]

Wah sir bohot badhiya thank u sir

[@MITHILESHKUMAR-co5bt]

Brilliant teaching

[@anandsarojvlogs8076]

Thank you sir..please next video thoda jaldi upload kare ...