ZK-MT21 50W×2+100W Bluetooth 5.0 Amplifier Board

Поделиться
HTML-код
  • Опубликовано: 4 сен 2021
  • ZK-MT21 50W×2+100W Bluetooth 5.0 Amplifier Board
    Unboxing, connection and Testing]
    _____________________
    Online Buy link -
    ZK-MT21 50W×2+100W Bluetooth 5.0 amplifier board
    amzn.to/3h3JaPk
    24v 5A Power supply
    amzn.to/3bpleCQ
    8 inch speaker
    amzn.to/3xLpLba
    6 inch speaker
    amzn.to/3xYHU5p
    6.5 inch speaker
    amzn.to/2W7mmWV
    3 Inch speaker
    amzn.to/2Xuck2S
    24v 5A DC Power Supply amzn.to/3L0tDfv
    12v 10A DC Power supply amzn.to/3qkRHlu
    12v 5A DC Power supply amzn.to/3D5mdoE
    -------------------------
    Please like video and share
    Thanks for watching | Have a good day
    Please subscribe channel
    / @mrmistry
    Facebook Page - / mr-mistry-189455677393...
    ------------------------------------------
  • НаукаНаука

Комментарии • 101

  • @muff-waggle-b9408
    @muff-waggle-b9408 Год назад +9

    I’ve used this lamp on several applications! Works awesome

  • @sanjivgamit5056
    @sanjivgamit5056 2 года назад +1

    Nice amplifier
    Good👍👍 performance.

  • @mose7752
    @mose7752 Месяц назад

    Muito obrigada!! Muito obrigada!! Era tudo que eu precisava.👏👏👏🌹🌹🌹🌹🇧🇷🇧🇷🌹🌹👏👏👏🌹🌹👏👏🌹🌹

  • @johnussss
    @johnussss 11 месяцев назад +6

    Don't use this model on a 24v solar system that supplies the voltage same as in the batteries during charging, blew the living bejeezous out the the 24v 4700uf cap, had to replace it with a 120v one, the rest of the circuit is ok up to 30v, it clipped even when supplying it 12v until I replaced the cap, higher voltage = higher output on this unit ... live off-grid and getting enough volume out of either 5v or 12v speakers aint always easy, caping this at a higher voltage makes it so even the lowest output device I connect to it has enough volume, one problem I have using it with a Windows 10 laptop via BT is if 2 sound sources occur at once (ie VLC and a streaming source both at once) ... no sound is heard if one of those sources stops till I switch to another speaker then back to BT ... or sometimes going back a bit on the time slider starts the sound again, which makes me think it's Windows and not the amp, it has to be the lowest noise amp I've ever setup ever in my life, and due to everything here being DC, the bluetooth bypasses the noise put into the output from the laptop (my main source of entertainment) if connected via wires ... the DC to DC PSU puts a lot of noise through the mic/earphone/external speaker jack and no noise suppression device was ever able to fix it! truly decent amp and low cost and robust, had it over 2 yrs now.

  • @romilsonsoares9205
    @romilsonsoares9205 10 месяцев назад

    Bom dia Posso usar uma Fonte Chaveada 24v 15a em um amplificador de som de 24v 5a que seria o
    ZK-MT21.

  • @JaviersDIY
    @JaviersDIY 2 года назад

    Impressive

  • @ckytgbgmi5806
    @ckytgbgmi5806 2 года назад +1

    My favourite youtuber ❤️❤️❤️❤️😘

  • @jawaharshanthi4653
    @jawaharshanthi4653 2 года назад +1

    I like it bro 🤩🤩🤗👍👍

  • @shivkumarkoshti3082
    @shivkumarkoshti3082 2 года назад

    Nice

  • @afropkerz
    @afropkerz 2 года назад

    Any idea to help me out? I tried with mid range speakers L/R and a small 30w ayima 3inch subwoofer. I used first 12v power supply and then tries 20v. both times midrange works great but subwoofer doesn't work right it sounds weird and warms up really quickly and with the 20v it blew little smoke also... Is the amp bad or what could be the problem?

    • @peggenlejoncar9529
      @peggenlejoncar9529 Год назад

      Maybe the ohm?

    • @useridk58777
      @useridk58777 Год назад +1

      A lot people asking this amp keep breaking at 20v. I just bought this amp and i use 12v. And it heat sink feel warm. So i had to get colling fan

    • @user-pz4hw2lu7e
      @user-pz4hw2lu7e 8 месяцев назад

      You used to big speakers you need to used small speakers 6 for mid and 4 for bass with a laptop charger 18v 3.5A

  • @ConveyorMan
    @ConveyorMan Год назад

    0.42 What is the code of opamp 4 ea?

  • @jpcezanne
    @jpcezanne 2 месяца назад

    Great video , but it misses the antena connection !!!!

  • @krimocoucou4716
    @krimocoucou4716 7 месяцев назад +1

    Hello my friend, I'm sorry to ask you questions because I'm not in the game, can I use only a black 12V charger: DC 12V 5A power supply? can I put 2 mini speakers of 15W + one of 50W then I wanted to know how to connect a USB key to this device, that is to say which device should be connected to this amplifier to be able to listen to sound on a usb key, can you give me a link so that I can buy it on ali express? thank you for your answers.

  • @youssifmahr8427
    @youssifmahr8427 5 месяцев назад

    Sir this amp will using with the car recorder?

  • @gioecheveria1724
    @gioecheveria1724 3 месяца назад

    Es para corriente 110? Se puede usar con 12v?

  • @markpesa4763
    @markpesa4763 2 года назад

    What is gud combination of power supply?

  • @The_McCoon
    @The_McCoon 20 дней назад

    What to do when it turns on the. Off

  • @toufiqshehjad9141
    @toufiqshehjad9141 2 года назад +4

    Biggest disadvantage is Aux input id mono and Bluetooth connection is so poor ...

  • @jahnuburagohain1473
    @jahnuburagohain1473 5 месяцев назад

    Usb aur ir sensor iss board main keise connect korte hein ? Plz reply.

  • @3khsieh830
    @3khsieh830 2 года назад +4

    I bought one ZK-MT21 recently. Its chips are : BT JL As21BP0C466-25A4(but can not find the data sheet from JL). 4 NE5532 OP amp. And 2 class D CS8673E.
    It works fine with good sound. However I faced one problem. If I connect it with AUX input, the sounds become mono not stereo. After debug for whole days. I found the EMI interference between CS8673E and BT chip. I have to disconnect the audio path (remove C15/C17) and input audio signal into main volume directly. Then I can get stereo and 2.1 output. Due to I onle use it for desk PC, no need BT connection. So it's ok to disconnect BT path. But I am wondering, why this ZK-MT21 can't play 2.1 (become 1.1) when using AUX input?
    Does any one see the same problem? Or this ZK-MT21 use the worse EMI chips?

    • @syedtarekali7729
      @syedtarekali7729 2 года назад

      how did you do it

    • @vishnups4719
      @vishnups4719 Год назад

      i do have that problem too, is there something i can do to still have bt connection and stereo output?

    • @HEREISMULLEER
      @HEREISMULLEER 11 месяцев назад

      I have the TB-21 , it has another chip, but has the mono problem once you connect and use the AUX port. Sounds terrible. Grrrr

  • @rahul20501
    @rahul20501 Год назад

    Sir kya ye board Sony d4p me use kar sakte he

  • @KAOSshortyrip
    @KAOSshortyrip Год назад

    How do i connect 2 of these together to handle more speakers without cutting out

    • @isma4956
      @isma4956 Год назад +1

      La única manera de usar 2 o más es por aux con unos puentes de cables aux

    • @HEREISMULLEER
      @HEREISMULLEER 11 месяцев назад

      You buy the 250 watt version

  • @pickuplover4066
    @pickuplover4066 2 года назад +2

    Can we connect directly to the car battery for amplifier power supply

    • @HEREISMULLEER
      @HEREISMULLEER 11 месяцев назад

      12 to 24V DC, connect it wherever you want.

    • @carlosmunoz561
      @carlosmunoz561 8 месяцев назад

      @@HEREISMULLEER It could be used in a 12v 5a motorcycle battery recharged by the same motorcycle

    • @carlosmunoz561
      @carlosmunoz561 8 месяцев назад

      @@HEREISMULLEER And if I wanted to connect it to the 110v outlet, which adapter would be the best or a good one would be 24v 3a or one of 12v 3a

  • @aliyahdonaldson2831
    @aliyahdonaldson2831 5 месяцев назад

    is this like an audio interface?

  • @iloveaviation-burgerclub-a8145
    @iloveaviation-burgerclub-a8145 Год назад +5

    How do you choose between aux and bt?

    • @gamingmark54
      @gamingmark54 Год назад

      Idk too😅

    • @gamingmark54
      @gamingmark54 Год назад +3

      I think if you plug in an aux cable it all switch auto?

    • @HEREISMULLEER
      @HEREISMULLEER 11 месяцев назад

      exactly @@gamingmark54 But you have to disconnect the bluetooth to hear anything, then its will be mono and sound like C@#P

  • @bozi1367
    @bozi1367 Год назад +1

    how much W i need on power suply to get max out of this AMP??

    • @_lucas_23
      @_lucas_23 Год назад

      It goes to 24 v but i don´t know how many watts.

    • @emsayonachi9300
      @emsayonachi9300 Год назад +2

      amplifier only pulls the current it needs from psupply depending on the load.
      people tend to crank the volume at max so to keep the amplifier safe, use only 24V (7A to 8A max) or 10A but avoid maxing volume for long period.

  • @akari7477
    @akari7477 11 месяцев назад

    What is the song

  • @thundergamingyt204
    @thundergamingyt204 7 месяцев назад

    Bro wt is the subwoofer watt and speaker watt

  • @PopatMomu
    @PopatMomu 2 года назад

    Can I Power supply it with 12 0 12 transformer

    • @MrMistry
      @MrMistry  2 года назад +1

      12-24v DC Power

  • @dattatraykamble7369
    @dattatraykamble7369 10 месяцев назад

    Is amplifier ko display kaise laga sakte hai

  • @IFADWORLD
    @IFADWORLD Год назад

    Can i use it abroad to 100V country?

    • @HEREISMULLEER
      @HEREISMULLEER 11 месяцев назад

      yes but dont plug it directly into the wall socket.

  • @shatruhankumar95
    @shatruhankumar95 3 месяца назад

    Mere ko Lena hai kaise mile ga online me

  • @EnzoE
    @EnzoE 2 года назад +3

    Hi, did you know if the ZK-MT21 use the TPA3116D2 or another chip ?

    • @EnzoE
      @EnzoE 2 года назад

      For people have this question: the ZK-MT21 use x2 CS8673E, if you're interested to know more and if you speaker French go check my YT Chanel > About, there is a link for a GDoc full of information

    • @djumar8284
      @djumar8284 2 года назад

      I have received today this ZK-MT21 and there were two chips of ChipStar CS8673e

    • @johnbarrow4701
      @johnbarrow4701 Год назад

      @@EnzoE Hi. I don't speak French, but was able to translate your very comprehensive document into English. It is very comprehensive!
      One question, and this could be me being wrong about what you are saying, due to problems with the translation! You are recommending the ZK-MT21 over other TPA3116D2 based amps such as the XY-S100H, mostly because of the Chinese app related security concerns for models like the XY-S100H? Is that right?
      Thanks

    • @shaikaleembasha3341
      @shaikaleembasha3341 Год назад

      @@EnzoE this amplefier working at auto rickshaw 12wats,, battery.

    • @user-zf1zd4of1j
      @user-zf1zd4of1j Год назад

      Какой чип лучше ___CS8673e или TRA3116

  • @narayanant.k.3266
    @narayanant.k.3266 2 года назад +2

    Can i USE THIS AMPLIFIER for
    ELECTRIC GUITAR. if you don't
    reply i consider that you don't
    know the answer.

  • @Laugh-capsule.
    @Laugh-capsule. 2 года назад +1

    Hey sir, I have a speaker having 30 watt rms and 210 watt peak .Please suggest me a amplifier board.

    • @Windorey
      @Windorey 2 года назад

      İf it's just one, TPA3118 mono board
      İf it's 2 (stereo) TPA3116D2 stereo board

  • @shivkumarkoshti3082
    @shivkumarkoshti3082 2 года назад

    Ye sab alag alag parts kaha par milte hai..... Please reply muje bhi aisa banana hai....

    • @MrMistry
      @MrMistry  2 года назад

      Link in discription

  • @skepticpotato2869
    @skepticpotato2869 2 года назад +1

    A less than 5minutes working Amp..........just received mine yesterday put a 22VDC power supply (i noticed a spark on the DC Jack connector) then test it with BT connection and played with 1 song the bass and treble when adjusting are scratchy and the heatsink also is getting warmer but the sound it produced is very decent after playing the song i switched-off and assembled the rest of the part but when powering up again it puff a smoke then no more i removed the heatsink and found the two chips are badly burnt it has a fake TPA3116D2DADR this is the same brand and type of Amp that showed here or maybe mine is a copy. the TPA's can handle up to 26VDC that is why i wonder why it burnt out. so be aware of buying this Amp.

    • @peggenlejoncar9529
      @peggenlejoncar9529 10 месяцев назад

      The back cover can go together with output on every chanel, better isolation between speaker output.

  • @jawaharshanthi4653
    @jawaharshanthi4653 2 года назад +1

    Notification is too late bro

  • @MukeshYadav-ru2bj
    @MukeshYadav-ru2bj 2 года назад

    Price kitna hai

  • @nampallylucky9399
    @nampallylucky9399 2 года назад

    What is the price

  • @ANUJSHARMA-tk6te
    @ANUJSHARMA-tk6te 2 года назад

    What the size of this subwoofer?

  • @user-mp2lo2mx1k
    @user-mp2lo2mx1k 2 года назад

    เสียชับเบดม่ออก

  • @user-iy2lg6zh2w
    @user-iy2lg6zh2w 6 месяцев назад

    Какой пароль на вай фай?

  • @NIGHT-ws3pc
    @NIGHT-ws3pc 2 года назад

    improve audio capture, buy more professional microphones for test recording

  • @ZAEC39
    @ZAEC39 Год назад

    ты еще тоньше мог провода впаять туда?

  • @haroldquintana1026
    @haroldquintana1026 2 года назад

    Ok ba yan sa woofer speaker na 100 watts na 10 inches

    • @alexanderdave4821
      @alexanderdave4821 2 года назад

      Na try ko boss. 200 watts na subwoofer ng acoustic 10 inches. Kayang kaya pabayuhin

    • @shaikaleembasha3341
      @shaikaleembasha3341 Год назад

      @@alexanderdave4821 amplifer is it used for auto rickshaw 12wats, battery

  • @kamandyvlog5139
    @kamandyvlog5139 2 года назад

    magkano

  • @royalabhi_0001
    @royalabhi_0001 Год назад

    Sir can i use a 4ohm subwoofer or we need to use 8ohm subwoofer with giving power supply of 24v
    Please reply no one reply i am confuse and how much amp we provide to amplifire

    • @MukundShukla547
      @MukundShukla547 Год назад

      Subwoofer should be of 4ohms but you can use speakers of 8ohms

    • @shaikaleembasha3341
      @shaikaleembasha3341 Год назад

      @@MukundShukla547 amplifer is it used for auto rikshaw 12wats battery

  • @testnreview7317
    @testnreview7317 2 года назад

    The ic is look like not original

  • @miroslavgargulak5005
    @miroslavgargulak5005 Год назад

    50W to určitě nemá a už vůbec ne 100W .Navíc to bude ve třídě D což se téměř nedá poslouchat ,to se možná hodí na nějaké levné rádio .

  • @ChoiDJ2027
    @ChoiDJ2027 2 года назад +2

    Can it support car batt 12v?

    • @yourlocalratz352
      @yourlocalratz352 2 года назад

      Yes but has to be a low amp battery

    • @yourlocalratz352
      @yourlocalratz352 2 года назад

      Takes 5/24v dc

    • @carlosmunoz561
      @carlosmunoz561 8 месяцев назад

      @@yourlocalratz352de que amperaje debe manejar normalmente?? Puede ser 12v 5amp? O 7 amp

  • @radharamannath2216
    @radharamannath2216 Год назад

    Can i use FREDO 8 Inch Double Magnet-4 Ohms/RMS103W/Peak 725W Subwoofer-Black

  • @user-jf7ob4do2o
    @user-jf7ob4do2o Месяц назад +1

    Price plz 😢😢

    • @MrMistry
      @MrMistry  29 дней назад

      inkocean.in/products/wuzhi-zk-mt21-bluetooth-5-0-subwoofer-amplifier-board-50wx2-100w-2-1-channel-power-audio-stereo-amplifier-tone-board-bass-amp-aux?ref=e7ixfoa59e

  • @sivanagaraju8035
    @sivanagaraju8035 Год назад

    Naearaju Nakka JBL I 200
    🇮🇳🔊🔉🔈🙊🙉🇺🇿💯🗣🧖‍♀️

  • @jassen22
    @jassen22 6 дней назад +1

    Poor sound test

  • @baskarshanthi505
    @baskarshanthi505 2 года назад

    What is the price friend?

  • @LUCKYCRAZYSTATUS
    @LUCKYCRAZYSTATUS 5 месяцев назад

    To yah amplifier kabhi mat lena duplicate he Maine to do liya donon ic kharab ho Gaya he mera 5000 rupee kharab ho gaya he