i made one of these 11 years ago w/o bluetooth just a car amp. nearly identical but i sold it as someone offered money to buy it. watching this makes me want to do it again. yours look way better kudos to you
Those tweeters need to be isolated, they are clearly driven by the woofers. Horrible chuffing noise from the port, which obviously needs to be wider and flanged. Horrific sound quality, but a cool attempt. Just make little boxes to isolate the tweeters. Separate the two woofers internally and use passive radiators on the sides and tune down to 30hz with weights. You can put a circular lcd display to show battery/time etc on where the port was. You can save the project that way.
The proyect is amazing, congratulations!, however I wonder if you could spend a bit more time explain the electrical connection. Thanks for sharing!! 🙏
That upside down jigsaw...yikes. But overall great use of limited workspace - one-stop table saw, router table, jigsaw, drill press, glue table, painting, soldering, etc...Also, interesting outfeed thru the window lol, hopefully your neighbors don't mind sawdust and paint spray on their balconies.
@@issoulescondes3913 You can install tweeter in the same box when it is "closed type" tweeter (sealed from air entering from the back). He did it wrong in the video as he used "non sealed" tweeters. They will act pretty much as passive radiators as pressure from woofers/mids can move tweeters cone from inside the box. You can see them moving out of phase when bass hits. Its going to distort sound and probably will damage tweeters as well. You should seal those manually by making small enclosures as others said.
Не рекомендую использовать фазоинвертор с мид-басом (или с широкополосником) в таких маленьких корпусах... Даже на видео слышно, что динамики захлёбываются из-за того, что подвижная часть выходит на свой критический ход (либо из-за нехватки мощности усилителя)... В таких системах идеальным вариантом будет щель с лабиринтом, либо пассивный излучатель. Плюс для хорошего звучания, внутрь корпуса нужно набивать материал, по типу синтипона. Надеюсь эти рекомендации вам и другим людям помогут в будущем.
Думаю, в данном случае провалы громкости на мощных низких частотах это проблема усилителя, а идея фазоинвертора была не такая уж и плохая, если была цели достичь максимальной громкости самых низких частот (с пассивным излучателем такое не прокатит). Внутрь лучше не ложить особо ничего звукопоглашающего, ведь это повлияет на вес подвижной системы (если такой широкополос как 10ГД-63К, то лучше использовать синтепон в ЗЯ, чисто для поглощения внутренних резонансов), максимум обшить стенки поролоном, лучше даже акустическим...
How can I calculate what power or mesaures I need for each component? I dont know anything about electronics But I have useful 6-8 different size speakers and want to create a stereo sound bar Do you know where can I find more information?
Start by making sure the speakers (drivers) match in sensitivity (SPL, measured in dB). This is more important than wattage, it will make sure that your speakers are at an even volume. You can use any amp with any speakers, but usually the amp is lower powered than the speakers. If you are using an amp with more power than the speakers, just be sure not to turn it up too loud. You will also need to design an enclosure that has the correct internal volume (i.e in Litres) for your drivers. if you google 'speaker box enclosure' there are calculators that will do this for you.
Mình nghĩ bạn nên ngăn cách 2 cái woofer, 2 cái loa toàn dải lg thì bạn vứt đi, cs thực có 10w thôi, thay bằng cặp treb khác ngon hơn. Mạch bluetooth thì bạn nên cách ly nguồn, còn không rè lắm, mạch tpa3116d2 2.1 này nghe chán lắm, đổi qua tpa3221 với bộ pre xịn sò là bá cháy.
@@Nguyenhienz-c6v Tào lao ông ơi, làm gì có treb mà cản tụ, 2 cái loa vệ tinh là toàn dải chứ không phải treb, còn cặp bass 20 cắt tần sẵn trên mạch rồi nên phân tần là vô nghĩa.
No sense project. Woofer and full range together without single acoustic box. What's the fan for if there's air moving? The bass reflex without a project...
it will keep constant voltage supply to an amplifier. When battery discharges over time, its voltage going to drop. Less voltage to an amp = less power output from it.
there is not even close the tweeters there is the abc of audio, if you don't know how to do things don't do them not that you learn people the wrong things
tay này làm loa gì ko biết. nhưng rõ ràng là ko có ý thức 1 chút nào. đã làm trên cao ko che chắn. còn xịt sơn thổi bụi. chắc là ko bay vô nhà xung quanh. để nhà người ta phải dính ba cái tạp chất do mình tạo ra. thíu ý thức quá.
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
i made one of these 11 years ago w/o bluetooth just a car amp. nearly identical but i sold it as someone offered money to buy it. watching this makes me want to do it again. yours look way better kudos to you
Those tweeters need to be isolated, they are clearly driven by the woofers. Horrible chuffing noise from the port, which obviously needs to be wider and flanged. Horrific sound quality, but a cool attempt. Just make little boxes to isolate the tweeters. Separate the two woofers internally and use passive radiators on the sides and tune down to 30hz with weights. You can put a circular lcd display to show battery/time etc on where the port was. You can save the project that way.
Noo They are covered from tha back
They are not tweetwers and they are not covered from back...but they should be
The proyect is amazing, congratulations!, however I wonder if you could spend a bit more time explain the electrical connection. Thanks for sharing!! 🙏
Looks veery nice👌
Edit: RIP tweeters
That upside down jigsaw...yikes. But overall great use of limited workspace - one-stop table saw, router table, jigsaw, drill press, glue table, painting, soldering, etc...Also, interesting outfeed thru the window lol, hopefully your neighbors don't mind sawdust and paint spray on their balconies.
large and small speakers cannot be installed in the same volume.
Those are Twitter
You can put medium and tweeter in the same chamber, but the woofer always need to be alone.
@@issoulescondes3913 You can install tweeter in the same box when it is "closed type" tweeter (sealed from air entering from the back). He did it wrong in the video as he used "non sealed" tweeters. They will act pretty much as passive radiators as pressure from woofers/mids can move tweeters cone from inside the box. You can see them moving out of phase when bass hits. Its going to distort sound and probably will damage tweeters as well. You should seal those manually by making small enclosures as others said.
Комментарий в поддержку канала и ролика, а также труда мастера.
Не рекомендую использовать фазоинвертор с мид-басом (или с широкополосником) в таких маленьких корпусах... Даже на видео слышно, что динамики захлёбываются из-за того, что подвижная часть выходит на свой критический ход (либо из-за нехватки мощности усилителя)...
В таких системах идеальным вариантом будет щель с лабиринтом, либо пассивный излучатель. Плюс для хорошего звучания, внутрь корпуса нужно набивать материал, по типу синтипона.
Надеюсь эти рекомендации вам и другим людям помогут в будущем.
Думаю, в данном случае провалы громкости на мощных низких частотах это проблема усилителя, а идея фазоинвертора была не такая уж и плохая, если была цели достичь максимальной громкости самых низких частот (с пассивным излучателем такое не прокатит).
Внутрь лучше не ложить особо ничего звукопоглашающего, ведь это повлияет на вес подвижной системы (если такой широкополос как 10ГД-63К, то лучше использовать синтепон в ЗЯ, чисто для поглощения внутренних резонансов), максимум обшить стенки поролоном, лучше даже акустическим...
How can I calculate what power or mesaures I need for each component?
I dont know anything about electronics
But I have useful 6-8 different size speakers and want to create a stereo sound bar
Do you know where can I find more information?
Start by making sure the speakers (drivers) match in sensitivity (SPL, measured in dB). This is more important than wattage, it will make sure that your speakers are at an even volume. You can use any amp with any speakers, but usually the amp is lower powered than the speakers. If you are using an amp with more power than the speakers, just be sure not to turn it up too loud. You will also need to design an enclosure that has the correct internal volume (i.e in Litres) for your drivers. if you google 'speaker box enclosure' there are calculators that will do this for you.
Me fez recordar os tempos em que eu assistia filmes de bang bang nos cinemas aos domingos. Matine das 4. Bons tempos.
Whats the music backup time at full volume?
Dava pra melhorar colocando as placas num alojamento separado dos falantes, já pra ver fuga de pressão na caixa pela placa mp3 20:22
“ em um “
may i know module the amplifier u use? thanks before....
Những mạch kiểu này cụng gắp đc mạch âm sắc hả bác
Mình nghĩ bạn nên ngăn cách 2 cái woofer, 2 cái loa toàn dải lg thì bạn vứt đi, cs thực có 10w thôi, thay bằng cặp treb khác ngon hơn. Mạch bluetooth thì bạn nên cách ly nguồn, còn không rè lắm, mạch tpa3116d2 2.1 này nghe chán lắm, đổi qua tpa3221 với bộ pre xịn sò là bá cháy.
Nhìn cách đấu nối là biết dân mù âm thanh rồi..loa to như thế mà k đấu qua phân tần hay tụ cho trép gì cả
@@Nguyenhienz-c6v Tào lao ông ơi, làm gì có treb mà cản tụ, 2 cái loa vệ tinh là toàn dải chứ không phải treb, còn cặp bass 20 cắt tần sẵn trên mạch rồi nên phân tần là vô nghĩa.
Very very very very nice video friends,,,
con herramientas adecuadas qué facil parece todo,buen video,gracias
Tenho dó dos vizinhos deste cara, não é fácil morar perto dele, com tanto barulho assim...
Is this thing tsronger then jbl partybox 100?
Is that amp is 2.1? ... why installed two sub?
Where did you buy the battery?
Boss mag Kano ganyan bilhin sayo
SPL ?
very good... great bro. what is the size of the box?
Nice speaker box but sound is really subpar.
Power output?
No sense project. Woofer and full range together without single acoustic box. What's the fan for if there's air moving? The bass reflex without a project...
Xài mạch gì thế bác
Loa 2.1 à bác , nác cho xin cấu hình với , cs và kich tjc thùng
có bán vỏ không ad ?
6"??? or 8"
A ơi con loa nhỏ đó là loa trebl hay loa mid hay loa bass v anh
trebl
can you plz share box size details
หาซื้อที่ไหนได้ครับชอบมากเลย
FANTASTICO, SENSATIONAL YOUR DESIGNS.... Thank you
Theo em cảm thì con mạch 2.1 này không hay cho lắm
7"-or 8"inch woofer speakers ??ohm voice
nhìn là biết loa không có bass, chưa có kinh nghiệm đóng loa, phải lấy 2 cái ống nhựa hoặc là đóng ngăn gỗ kín loa treble đi bass nó mới hay dc
Có nhận làm box này không anh
Linh kiện loa bác mua ở đâu thế ạ?
Maybe in online shopping
Nice Speaker
Среднечастотник отделять надо от низкочастотного
What is part at 14:38 used for?
power supply
Hi friend, where I can contact you for an opinion ?
sangat sempurna.. ☝👍👍👍
Bác có thể đóng giúp e 1 cái giống của bác không.
Kaha pe milega bhai mere ko chahiye please bata do na
Không cách ly nguồn của Bluetooth thì ù rè lắm
Jleger mantab bang
Your woofer connection , decrease the ohm , the box volume not suitable for bass
The wordwork is amazing and pretty though the design of the box itself shows you dont know how to design a box lol
Con que medidas lo construyó de cuántos Ctm la hoja el corté muy bonito pero sin medidas ??
Gooood 👍🏽💪 apakah bisa pesan .?
rip tweeter
bro please give me dimensions of the box
Cara membuat boks speaker merek Roadmaster
Put the link to huy components electronic
Bhai aap kaha se ho bolo bhai mujhe bhi banvana hai pic bhai mijhe ek bana ke do yaar pic
Instead of using buck converter why you dont use 24v battery directly? Buck converter will decrease ampere
it will keep constant voltage supply to an amplifier. When battery discharges over time, its voltage going to drop. Less voltage to an amp = less power output from it.
Klow pesan yg 5 inci brapa boz
Это FM модуль так фонит? В видео один фон в звуке
Modified Antenna and RCA ADAPTER INPUT AND OUTPUT
А ни чего что ВЧ вместе с НЧ флексят. Норм же звук новерное бомба😀
🤣
Bisakah saya order
unt pemesanan apa ada no WA
👍👍👍
there is not even close the tweeters there is the abc of audio, if you don't know how to do things don't do them not that you learn people the wrong things
tay này làm loa gì ko biết. nhưng rõ ràng là ko có ý thức 1 chút nào. đã làm trên cao ko che chắn. còn xịt sơn thổi bụi. chắc là ko bay vô nhà xung quanh. để nhà người ta phải dính ba cái tạp chất do mình tạo ra. thíu ý thức quá.
Dijual ga bang
Cuáles son las medidas
Wo so super cute
Muito linda essa caixa de som
Nice
Bro pls give me list
Excelente!
Berapa harganya untuk yang 6.5 incih
Las medidas xfa
wow
Somzera 👍🏻🔝
Please give a full wiring diagram
Anjayy keren
Apa bisa pesan
Minat nih berapa harganya
Sayang.ga di sertai harga.
🎥🎥🎥
Is the nest
10inch
You please give me this
Ijin bos bleh minta skemanya
Mia mi song sang duo duwla
asli mana??
Супер
Красивая хрень!!!😂😂😂
Kalo pesen kayak gitu berapa bang?
bad idea and bad sound :(
A
8
Color no good
Espectacular
Low power sub 👎🏻👅👅👅