Alfa Romeo Giulietta Rear Diffuser Upgrade & Bumper Removal
HTML-код
- Опубликовано: 29 апр 2021
- In this Alfa Romeo Giulietta video look at how to upgrade / replace the rear diffuser / splitter part, and remove / refit the rear bumper / fender. We also look how do you remove the rear lights, number plate lights and reflector removal.
#Alfaromeo
#Giulietta
#Vialettotony
#Driveway
Please like & Subscribe to the Channel to see other "how to" & "repair" videos & "things you wish you knew earlier", that are up already, and getting posted soon. Everything from Battery replacement, Trunk / Boot Wiring Looms, Air Filter, Cabin Pollen Filter, MAF Mass Air Flow Sensor Fix Cleaning, PCV valve, Fuel / Gas Filter, Steering Fault Codes Fixed, Passenger Airbag Light, Electric Windows, Anti Rollbar / Sway bar Bushes, Drop Links, Brake Discs, Brake Pads, Brake Fluid Flush, Rear Springs, MOT Preparation, and a whole lot more to come. 2.0 JTDM 170
In questo video di Alfa Romeo Giulietta guarda come aggiornare / sostituire la parte del diffusore / splitter posteriore e rimuovere / rimontare il paraurti posteriore. Vediamo anche come rimuovere le luci posteriori, le luci della targa e la rimozione del riflettore.
#Vialettotony
Per favore, iscriviti al canale per vedere altri video "come fare" e "riparare" e "cose che vorresti sapere prima", che sono già attivi e verranno pubblicati presto. Tutto, dalla sostituzione della batteria, cavi del bagagliaio / bagagliaio, filtro dell'aria, filtro antipolline dell'abitacolo, pulizia fissa del sensore di flusso d'aria di massa MAF, valvola PCV, filtro carburante / gas, codici di errore dello sterzo fissi, luce airbag passeggero, finestrini elettrici, barra antirollio / oscillazione Boccole della barra, tiranti, dischi dei freni, pastiglie dei freni, lavaggio del liquido dei freni, molle posteriori, preparazione del MOT e molto altro ancora.
W tym filmie Alfa Romeo Giulietta zobacz, jak zmodernizować / wymienić tylny dyfuzor / część rozdzielacza i zdjąć / zamontować tylny zderzak. Przyjrzymy się również, jak usunąć tylne światła, oświetlenie tablicy rejestracyjnej i demontaż odbłyśnika.
#Vialettotony
Proszę polub i zasubskrybuj kanał, aby zobaczyć inne filmy „jak” i „naprawiać” oraz „rzeczy, które chciałbyś wiedzieć wcześniej”, które już są dostępne i zostaną wkrótce opublikowane. Wszystko, od wymiany akumulatora, wiązek przewodów bagażnika / bagażnika, filtra powietrza, filtra przeciwpyłkowego kabiny, czyszczenia czujnika masowego przepływu powietrza MAF, zaworu PCV, filtra paliwa / gazu, naprawiono kody usterek układu kierowniczego, oświetlenie poduszki powietrznej pasażera, elektryczne szyby, stabilizator poprzeczny / kołysanie tuleje, drążki wahliwe, tarcze hamulcowe, klocki hamulcowe, płukanie płynu hamulcowego, tylne sprężyny, przegląd techniczny i wiele więcej w przyszłości.
Dans cette vidéo Alfa Romeo Giulietta, regardez comment mettre à niveau / remplacer la partie diffuseur / séparateur arrière et retirer / remonter le pare-chocs arrière. Nous examinons également comment retirer les feux arrière, les feux de plaque d'immatriculation et le retrait du réflecteur.
#Vialettotony
Veuillez aimer et vous abonner à la chaîne pour voir d'autres vidéos "comment" et "réparer" et "choses que vous aimeriez savoir plus tôt", qui sont déjà disponibles et seront bientôt publiées. Tout, depuis le remplacement de la batterie, les faisceaux de câbles du coffre / coffre, le filtre à air, le filtre à pollen de la cabine, le nettoyage de la fixation du capteur de débit massique d'air MAF, la soupape PCV, le filtre à carburant / gaz, les codes de panne de direction fixes, l'éclairage de l'airbag passager, les vitres électriques, la barre anti-roulis Bagues de barre, biellettes de suspension, disques de frein, plaquettes de frein, rinçage du liquide de frein, ressorts arrière, préparation du MOT, et bien d'autres choses à venir.
Se aftó to vínteo Alfa Romeo Giulietta deíte pós boreíte na anavathmísete / antikatastísete to píso méros tou diachýti / diachoristí kai na afairésete / epanatopothetísete ton píso profylaktíra. Exetázoume epísis pós afaireíte ta píso fóta, ta fóta pinakídon kykloforías kai tin afaíresi tou anaklastíra.
#Vialettotony
Sas arései & Engrafeíte sto kanáli gia na deíte álla vínteo "pós" kai "episkeví" vínteo kai "prágmata pou thélete na gnorízate norítera", ta opoía échoun ídi xekinísei kai tha dimosiévontai sýntoma. Ta pánta, apó antikatástasi batarías, Anemistíres kalodíosis kormoú / bótas, Fíltro aéra, Fíltro gýris kampínas, MAF Mass Sensor Flow Sensor Fix Cleaning, PCV valve, Fuel / Gas Filter, Steering Fault Codes Fixed, Passenger Airbag Light, Electric Windows, Anti Rollbar / Sway bar Bushes, Brake Disc, Brake Pads, Brake Fluid Flush, Rear Springs, MOT Preparation kai pollá akómi.
In diesem Video von Alfa Romeo Giulietta erfahren Sie, wie Sie den hinteren Diffusor / Splitter-Teil aufrüsten / ersetzen und die hintere Stoßstange entfernen / wieder einbauen. Wir sehen uns auch an, wie Sie die Rücklichter, Kennzeichenleuchten und Reflektorentfernung entfernen. Авто/Мото
As a new Giulietta owner, I am finding your video's extremely valuable - many thanks for your great work.
Hi John. Congratulations on your new car. Thanks for the positive feedback and for watching. Really appreciate it. 👍
All the best.
And yet again. Thanks a lot for these video's.
The bumper doesn't have to come off to remove the diffuser. Just remove the screws and gently pull it off.
Yes that’s correct. At the start of the video I say about wanting to demonstrate how to take it off regardless 1) because of restricted camera space to document it properly and 2) to show how to remove the bumper as people have been asking about it.
But yes I completely agree with you. Thank you for your comment. Really appreciate it and your time watching the video.
All the best 👍
@@vialettotony Ah okay, I'm sorry, watched the video without sound haha. You're making great Giulietta instruction video's. Keep up the good work!
@@flapper111uk Hi, as in to replace the diffuser part only? Yes if that’s what you mean.... you can change that without needing to take the whole bumper off. I mention it near the start of the video. Hope it helps. Thanks for watching.
Can I replace the bumper without lifting car and removing the bumper?
Great Job Tony - Thanks as always (Subscriber)
Well nice to see this i have some damage on the rearside with this video i will di it my self....
gracias
Great Giulietta
Very handy! Thank you!
Non ho capito bene xché non hai montato il dam ultimo modello forse hai fatto vedere come si smonta? Comunque primo video che si fa vedere tutto cn precisione 👍
Would be nice to find a valance with no cut outs for exhaust on either side so I could have a hidden exit underneath. Visible exhaust pipes are a bit tacky…
Bravo!👏 Good video
I hope I don't have to do this to repair a parking sensor that got pushed in into the bumper. It's the one above the licence plate.
Loving the videos as a new Guilietta owner :) I wanted to ask Tony, when removing the diffuser myself, I wouldn’t need to go through removing the whole bumper is that correct? Thanks dude, been a great help so far and I’ve only watched 3 video’s😅
Hi. Yeah that’s right. No need to remove the bumper. Can upgrade the diffuser with it on the car. All the best. Thanks for watching. 👍
Hi tony. I have a question. Is it possible remove the dam without remove the entire bumper? Is possible remove the dam with the bumper installed? Thanks.
Ciao Antonio. Yes it is. 👍 Grazie Mille.
Can I replace just the diffuser, the black plastic part at bottom, without removing anything else and without lifting the car? And by the way my lights at the heck for the license plate are not tight in the bumper anymore. You have any tips for that? 😊
Hi. Yes you can do it with it on the car and without lifting it. With the lights, sounds like the spring clips may be out of shape. Might be worth trying to bend them out a bit to make the fitting tighter. All the best 👍
Is is the same principal for the mito?
As far as I know, yes. All the best 👍
Very nice
Can you remove the diffuser without removing the rear bumper?
Yes absolutely. All the best 👍
Hi Tony, another really informative video. A question about timing for this. I appreciate you were filming this as well, but how long did it take to remove? I'm looking to put a reversing camera on my Giulietta and the best place seems to be between the two reg plate lights. From what I can see from your video it's going to have to be a bumper removal to get it where I want.
Hi Andrew. Yep, sounds like a bumper off job to do it properly. I’d say probably less than 30 minutes to get it off if you’ve never done it before.
Hope that helps.
All the best 👍
@@vialettotony Great thanks for sharing - really appreciate it - keep up with the videos, they're awesome!
@@andrewparker2882 AliExpress - reverse camera built into a number plate light. Plug and play, bumper doesn’t have to come off.
Any recommendations on where to get the better looking rear splitter/dam?
Hi Luke. Lots of people go for the Maxton one. I can’t comment either way but that may be a good starting point. Hope that helps. All the best 👍
Do I need to take tyre off ?
No. 👍
Clean and vacuum that poor car man yuck
Haha. Look out for that video soon 😉