How To Stop 66cc 2 Stroke Carburetor From Leaking Motorized Bike
HTML-код
- Опубликовано: 15 окт 2024
- How To Stop 66cc 2 Stroke Motorized Bicycle Carburetor From Leaking
Check out my Website for more information on my creations:
hughesmotorized...
Tools & Equipment I Use in Fabricating Motorized Toys:
Sheet Metal Elactric Cutter Tool: amzn.to/2lf1Y3Y
Sheet Metal Plate Shear: amzn.to/2lb1jQT
Sheet Metal Brake: amzn.to/2lqcIMZ
Metal Cutting Saw: amzn.to/2jUVh6M
Plasma Cutter: amzn.to/2leyTFN
English Wheel: amzn.to/2latNu2
Budget English Wheel: amzn.to/2SyNVTg
MIG Welder: amzn.to/2l6m6Fk
TIG Welder: amzn.to/2lezYxl
Epoxy Gas Tank Sealer: amzn.to/2lf3xim
Chain Cutter Tool for Drive Chain: amzn.to/2jMQlkd
Pedal Chain Breaker: amzn.to/2lf4dUW
Angle Grinder: amzn.to/2leAQ55
Cutting Discs: amzn.to/2jKw26Y
Flap Grinding/ Polishing Discs: amzn.to/2jNA2no
Laser Line Tool: amzn.to/2SFu2tR
![Oscar Maydon x Fuerza Regida - Tu Boda [Official Video]](http://i.ytimg.com/vi/_ymicn0_GYc/mqdefault.jpg)
My husband decided to help me put a motorized bike together. After 30 minutes, he was tired of hearing me say, "That's not what Mr. Hughes says", or "Let's ask Mr. Hughes"! I can't help it. You're my go to guy. Thanks for all the terrific videos. You've kept me on the road for 3 years now. You know your shit.
I spent a solid 3 hours trying to locate the problem with my bike and you gave me the answer just like that. Thanks for this incredibly helpful video! :D
Me right now as we speak in current time at this moment
Thanks again, Hughes. My project ran trouble-free for about two months and the bike sat in the garage a couple days and began to leak from the carb seemingly out of nowhere. Gonna try to troubleshoot the issue with the help of this video.
You have some of the best motorised vidios brother! Keep up the good solid work!!!
spent all day t couldn' t figure it out will give this a try ...great video,Thanks
A very straight forward explanation without a lot of technical jargon. Told me everything I needed to know.
I love your channel! Learned so much from you. On my second build now. I was cleaning my weber carb on my Isuzu with the straw attachment the high pressure fluid went into the port and right back in my eye! It really sucked!
I saw my carb is leaking this morning and will try this later if it works i will update you sir, Many thanks for your help, love from Philippines
You ain't lying about getting that shit in your eye! I just got out of the hospital from getting carb& choke cleaner in my eye even with safety glasses on... Goggles or face shield would have been much better than trying to get in a hurry...I been in steady pain now for 5 Days this is first day I can look at the light... Keep teaching them safety Boss... I enjoy and appreciate your videos! Could you please do one about building your own custom exhaust system and the benefits of a torque converter? Thanks
OUCH! Get well bro. I have a face mask somewhere and I dont use it enough, Same w/ my respirator. I've got a 29r frame I'm hopng to do a board tracker on one day and will do the exhaust for that. I'm too cheap to pay for a torque converter so unless one falls from the sky don't think I'll do a vid on a TC. Take care
I have strugled with these carbs for years i typically assume the float is water logged--- going to attempt the spring bend here... can you tell me what the idle screw actually does --like if i turn out is it allowing more air or fuel? what is the best setting for the black lock on the needle - top middle or bottom? -- i started running without a filter - got 2 new carbs on the way
Great video. Nicely done, you hit all the points I needed to get my carb back to running smoothly.
thank you so much!!! the tapping didnt work but cleaning it out did, I probably need to upgrade on the carb , but its new, only rode it for half a tank
That carb is fine. See my vid on performance upgrades. I'll save you some money
Thank you for the video, I took mine apart and now I see the pin on mine is upside down, I hope that is why it's been running like crap, I have a 80cc motor what plug would you use?
Thanks man ut video helped bending the ears back stopped the leaking . What i don't understand is how did they get bent in so far🤔 i have 73 miles on it i recently swaped motors and i sat it on the floor but thats all did anywho yousave me money and i learned a couple of things
Glad it helped
@@HughesMotorized question I think I bent them back too far it seems like it's not getting gas because it started for a min and I couldn't get it going again it was late . But could that be a issue if the floats adjusted too much it won't let the gas flow? I'll make a video maybe u can advise? Ty in advance again 😁🏃🏃
Thanks man, first time owning one of this and I was having trouble with that leak, but I just drained, gave it a few love taps and now its not leaking anymore
Glad I could help
Good morning this is Robert first off I have to say I'm a big fan you have helped me with my motorized bike but now I have a problem with my bike could you possibly help me with this problem? I noticed gas is starting to slowly come out of my exhaust pipe what can I do to fix this problem? Thank you for your time
Look at this video. Might help: ruclips.net/video/Mktwz0CCKsc/видео.html
Thanks, this totally worked, I tired the 1st method and hit the bowl and it works now
Hello, could that be the cause of loose of power because all my gas coming out of the carb, from the filter from the bowl.could that be the only cause?
I have one of those HP racing carbs and it leaks when it the bike is tilted sideways on the kickstand? I don't know much about these carburetors but I like them better than the NT.
Nice clear, and to the point. Thanks for uploading. 👍
THANK YOU SO MUCH MATE YOURE A LEGEND
Hi, good explanation!!
Question?? I just got a new bike but at first when I try it in the Ally of this guy it was fine, but when I got home w/ bike in my car, I smells gasoline, and is licking all around under the top of the carburetor.
So I don't know if I should put another carburetor, or I have to adjust something like you was doing and make sense like you did Ana you video and I think is something to do like you explained, any ideas what I should do, thanks
Danny Chuqui ,,,. If you lean them over on their side very far they will leak,,,. Just wipe it off let it evaporate and it should be fine,. ???
There is a small pin on top of carburetor which can be pressed down and it has spring which pops it back. May be its a vent not sure what it is for. My carburetor is leaking gas at base of that pin. Will above procedure fix that too? Thanks
That "pin" is what allows one to prime the carburetor for easier starting when the engine is cold. You hold it down for several seconds before starting.
YES, I'm pretty sure following the video will fix the issue
@@HughesMotorized Thank you. I did as you said but I'm having trouble. When I bent those clips inside fuel bowl down then bike hesitates but gas leaking stops. Then I bent it little up again and now hesitation gone but it leaks again a little. Don't know what to do.
Can I ask ok I just got my bike with the 80cc motor is t anyway to take the pedal start out of this motor a d add a starter and the key set up
Big help, thanks so much
Glad it helped
I'm gona have to do this and I just fixed my gasket it had done a contact piston due to top bolts being loos hopefully it's just a few taps and loosens float
I LOVE YOUR CHANNEL AND YOUR VOICE NO HOMO AND SPEECH PATTERN ITS LIKE ROBERT DOWNEY JR.
Just wondering, are the inlet on the stock 66cc carb..... 60mm? Ebay are selling them and I wonder if it fits because I have no air filter at the moment, or do I have to modify it?
You got a new sub dude
Straight forward and hit every point without wasting time. Thank you, this was a great video!
Do you not use the c-washer thing in your carb?
my friends bike leaks gas from that primer or plunger not sure what its calld. but its the only part on this vid that you did not talk about. can you explain its purpose and why it leaks
How about those HP carb, are they much better! thanks
I like the NT that comes w/ most kits. I've read that even many who race these things up there in California will run them. Main thing is to jet them properly, have the cylinder ports cleaned up, a good head and expansion chamber.
Oes it matter on the float what side goes up towards the carburetor does the seam on the float
Thank-You I just upgraded from 80cc to 100cc but new carb is leaking after changing jets. I will bend the tabs and let you know.
Great info, thanks.
my bike starts but hardly gives me any power than it used to. it also won't stay running when I hold in the clutch and come to a stop. I changed the spark plug because it was completely black. it didn't seem to be giving off very much Spark when I tested it. I did notice that the air filter was full of gas. could this be what's wrong and why it's running the way it is? any help is greatly appreciated
Kevin Rivard Did you end up fixing your bike? What was wrong with it my bike is doing the same thing now which freaking sucks help me please.
Hey Im having the same issue right now sergio, Im about to inspect my carberature and see whats going on
Same
Did you check your idle adjustment? I had one that was the polar opposite, runaway motor when the clutch was pulled in. Don't know if idle may be your issue or not. Hope I was helpful. Good luck with your bike.
Try putting ur clip in 2nd notch away from the needle an gas mix ratio should be at 50:1 or 40:1
thank you. You save me alot of money.
Thanks hope this fixes my issue carb is brand new and leakon
i really appreciate this man definitely a thumbs up
my penney's moped had a carburetor just like that one, i had to get all new parts for it less than 6 months after i got it
Thank you.
I did this and it still leaks. Any idea why? I notice the slide doesn't go all the way down. Could that be the problem?
You can bend the 2 prongs inside the bowl to apply more pressure sooner
I just put together a motor that I bought on Amazon and the engine that I put together the carburetor is leaking gas and I'm trying to figure out the problem and it's like when I try to pedal my bike it wants to get power but it doesn't get power. Need help
wow 2 second fix and i was worried,thanks.
Is there a reason why it leaks through the black plastic cap thingy?
Fuel is flooding into carb. The part that stops the flow is not working
Is this video describing when the gas is actually like just pouring out of the air filter because that's what mine is doing
yes
Thank u so much sir u saved my life 😄😄😄😄😄😄😄😄
Do you know what to do on the two stroke it was working the other day and now it's just stop I have spark I see gas and I have good compression what in the world could it be
My carburetor leaks from were the air filter and carby meant. Any suggestions on what to do?
Watch the vid.. it shows what to do
thanks boss, your advice worked.
This is why my motor runs like crap.
Thanks for showing the correct spot to bend. I bent closer to the tab and it was fine for just a single run..
So this happened to my new carb so I put my old one on and after the first ride it started leaking just like the new one 😢
Hello Eugene, what if I was riding full speed and I had my tag go into my chain and dragged it into inside the clutch of the little star where the clutch engages?
It broke my chain. And now Its leaking gas the carb nonstop, it emptied the whole gas tank
Tag?
Float issue. The video addresses that
My rag went into the chain engagement
the part that u bent 2 adjust is called a fork. Good video.thanks
Or how bout hitting the float plunger it isnt a gas primer the bowl will fill up until the float tell it to shut off if it is stuck that is what that push pin it to dislodge the float
i like your videos great work thanks
My carb is spitting gas out of the air intake hole as a mist it gets the air filter wet and it’s suffocates the bike. Help
Follow the vid. It will cure what ails you
I tried tapping the bowl but it’s still leaking from the filter side. I really don’t know what to do.
watch the video. It tells you to disassemble and clean the carb
what would make the engine rev high and not go down to normal idle?
Sounds like an intake air leak
what if i put expanding foam in a cracked floater?
I don't every thing like u said and It still leaks G as from carb
Bend float arms down a little
So I pressed the bronze button and i want to know 1 what the name of that button is 2 why it keeps letting oil out through the air filter mind you I only pressed it once and now no matter what I do there is oil still being let through the air intake
Here you go:
ruclips.net/video/9iPDA6PsT_g/видео.html
Hughes Motorized appreciated but I watch this video several times and it doesn’t protain to the bronze button at all
@@cobboy4616 The brass button presses down on the float and allows more gas into the bowl which will let gas flow into main jet. if you are having the issues you are describing, the issue is the carb needs the servicing outlined in this vid. Promise. The gas coming out of the primer button and air filter means the seat that stops the flow of gas into card and shuts it off when full is leaking. Good luck
Hughes Motorized appreciate it man
Thank you so much!
the float has light green inside it but how do í empty it
nice video
Is leaking from the carburetor the reason why a bike wouldn't start? Because that's the two issues I am having. The carburetor is leaking and it doesn't want to start.
Help???
+Michelle Olivo YES..if it is leaking because of the float, it is getting way too much gas and that would make it hard to start
So I should totally remove it and get a new carbureto?
You can clean, adjust and service it like the video shows
Usually that is the issue, the carb is being flooded w/ gas and the result is no start
**PLEASE HELP** I just discovered it's leaking from the base of my primer button like +ray smooth's friend. I don't know how to fix it and that's the only thing (as of now) wrong with my week old beautiful build. any help from anyone would be so appreciated
Hi my 80cc leaks alot of oil from the head its only a month what could the reason be
Only a month old
Omar Arabi that's normal
I did all that three times still leaking any ideas
OMG Thank you sooooo much for putting up this video. My eldest son has a motorized bike and for the life of us we couldn't figure out why it was leaking gas from the air intake. This fixed it. Just a few love taps. We are going to get the cleaner and clean the whole thing out though. It probably needs it. Again, thank you a ton.
I just put my80cc stage I flying horse together have spark has compression spark plug is wet with gas cant get it to startat all even after drying spark plug
How can I add pics
facebook.com/groups/hughesmotorized/ Join and create a post
my engine stop idling all sudden when i hit clutch on engine die why.
Turn the screw on the carb inwards man
Unfortunately this is a temporary solution. As long as you have this particular carburetor, sooner or later the problem will surface again! I would recommend on a dellorto or mikuni carburetor as Mathew Piper (Guy commented) suggested or advised.
^your awesome
thank you sooo soo much man :)
hey i have a question. I just put my bike together and the frame of my bike makes the carburetor have to be seated sideways. will that stop the bike form working properly?
yes, it affects engine performance
if its slightly cocked, its ok. mines like that and I have no problems of performance issues
Darth10900 mine is just like yours and works fine
Been having an issue i have no power cleaned the carb and it keeps dying after i let off the throtle
Could be head gasket, spark plug, bad coil
@@HughesMotorized i ut a new head gasket on it only thing i do know is i did get cought in a down pour so maybe it is the coil
@@wbza107111 They don't like getting wet
You see that gold button on the carburetor yeah I pressed that and now it just won’t stop leaking please someone help me
Watch the video. You need to service the cab.
My stock nt carb 68 jet 4 oz synthetic per gallon, over 300 miles on engine, when I bought the delorto racing carb with wide air intake, it was much richer but lower power, how come with the same Jet size, the nt carb runs leaner? I have way more power with the stock nt carb.
Rick Simpson I have the needle clip usually on top lean or 2nd notch down, I tried a 65 jet it seems to get more top end than a 67 jet yet sometimes at high rpm it s like it doesn't suck any fuel for a second or two, then it will resume, it doesn't stall but it seems flooded or choked at wide open. A hotter plug is a b5hs a b6 is cooler, don't you think a cooler plug will help the engine run cooler? I ordered a gt6 racing engine because I'll still save this one.
Rick Simpson I just got a boost bottle on mine,will the boost bottle make it run leaner or richer?
Rick Simpson my carb float is at 21mm, a website gave that height to be a ballpark setting. So if I press the tabs down I can add more fuel in the bowl, it could just need a height adjustment like you said
need some help my bike keeps wanting to go full throttle with out me doing anything need help plz
Lee Dunlap idle screw needs to be adjusted
dank9288639 hay when u get to a certain speed does your bike vibrate like crazy?
Naa I got a nice heavy beach cruiser and I have a 4 stroke but I have a NT carb conversion on it it does about 32mph with a 36 billet sprocket in the back
if in doubt, give it a clout!.........:)
thank you for these video great job :)
This happened after a good use of going full speed for a few miles
For real
Yes same
The HP carb has no way to a just the float it all plastic in side that's why I will be going back to the speed carb
when i zqueze the gas pipe makes bubbles
Can anyone help me with my ? Honestly please
There are electric start motors out there. Bikeberry sells one
Any time I run into a problem with my bike (which is often), this is where I always end up.
Thanks. Glad to help
Hello I have a ? That has to do with my frist 80cc motor ok
Is there anyway to remove the pedal started setup and setup the key and startet
do i have to buy a new one????
Watched 3 mins in fixed it
Sounds like someone got carb cleaner in their eyes lol
Everyone I'm new to this like I have a question to ask everyone please help me on I don't want to I just text the whole story and it was a very kind of long story but I was explaining that I basically paid 225 for two frames one has red mags and that's it's a frame and Max the other had a broken frame but a PK pk80 my man had doing 44 Mi an hour I have the bike two days and he completely redid it put it in those supersonic whatever it is bad or cleans all the parts at microscopic levels put the ship back together I get it I have three days also driving it and just shuts off I give it back to him he tells me it's the floater in the car put some new floater in the car I will pick it up I drive at point nine miles exhaust pipe falls off in the motor starts making this crazy sound like I was dragging tin cans my engine I shut it off I called and told me exhaust pipe got loose and after about 30 seconds and engine started making this crazy noise and then shut it off he comes and picks it up has it for 12 days I go pick it up and him $50 changing float then I take it now I take it I get point nine miles away and they lost play starts shaking starts making this crazy noise like like dragging tin cans and I tried to stop and tighten the exhaust and Enchanted lined up the same way it was but it seemed like damage was done so from this dude not tightening up all my s*** my exhaust pipe falls off point nine miles away from his house and he comes picks it up toes it back to his house so I told him this time that I want it I wanted you to put 100cc iron sleep so he got a pk100 iron sleep I picked it up yesterday not today I have took you for a ride and I'm trying to break it in and everybody that's reading this please and if anybody give me tips on how to break it in your engine now I'm going to show you and post a pic can you please tell me if not the not the top head that's from the old engine just the cylinder two-cylinder imma show you supposed to be a pk100 iron sleep please tell me if you think that this dude really gave me a pk100 iron sleeve and upgraded my s*** or did he put on some b******* smaller s*** or I won't be able to tell so if you can tell please let me know what you think it is thank you to anyone and everyone that can help me answer these questions cuz I want to know if I got beat or not cuz it's a very serious issue if this dude beat me is going to be problems so I need all the correct information is at can get thank you in advance
This guy sounds like Dr. Phil
Thats what she said😂
is there a possible way u can contact me please????
1:09 Now anyone knowing A HAM knows ham's don't motorized bike OK the float sticks due the position is not level and vertical .
theres a tiny hole where gas is coming out of on my air filter. it never leaked before and I don't know why its doing it now. its not the idle screw hole or the primer button. its right next to the main hole where air is put into the engine, maybe you could help me out.
Outdated Tastes same did you figure it out