How to Remove a 300zx Motor (Z32 Motor Pull)
HTML-код
- Опубликовано: 7 сен 2024
- This is a short how to video on removing the motor and transmission from a Nissan 300zx non turbo 5-speed (1990-1996).
I am, by no means, an expert! This is simply how I removed the motor!
Hopefully you find this video helpful! If so, hit the like button.
Any comments or questions, drop them below, or you can message me on Instagram: WickedWide_Z32
Thank you for watching!
For anyone watching, save yourself some time and money and don't mess with the ac. Unbolt the compressor and leave it in the bay. No need to drain the refrigerant and refill! 😉
You have the best video on how to pull this motor. I have owned these cars for 10+ years currently owning 4 and always come back to this video
Bro I just got my Z and this video helped me 🙏🏻 hopefully the new motor goes good
Thanks for making this, I will probably need it when im in over my head with a Z32 in the future
great video ....very good explanation, very helpful
Been there 4 times over 20 years. Not for blown motors, well one was but ya. Much easier to pull with tranny out. I like to pull the plenum to with my picker works well.
this video was really helpful man!🙏
Awesome job with the video! Keep it up and looking forward to more vids.
Do the plenum pull this video was awesome.
George F glad you liked it!
George F are you asking me to make a plenum pull video next?
@@wickedwide_z3259 i believe he is lol
WickedWide_Z32 yes. This video was so good. Very well edited and produced.
George F I will see what I can do!!
Very helpful video. Thank you
Thanks for the video very informative
A lot of people thought this was my car because of the custom headlight design.
you didnt show us how to wrap the chains around the plenum :( to pull motor
I figured that was pretty straight forward. Just loop them under. You can use chain, straps, seat belts, or an engine load leveler.
Can i use a manual engine for my automatic 300zx
James Mata yes, just have to swap out the flywheel and clutch for the torque converter.
what set of ratcheting wrenches is that you are using there? I would like to get a set like that
Shawngo Slice you’re going to have to be more specific. I used a lot of tools in this video. Post a time in the video I used it and I’ll tell you what it is!
never uploaded the install video?
I did not.
roughly the same process for the TT yeah? i got a japanese model 1989 z32 TT and want to pull its guts out for a quick overhaul after the last owner clapped it a bit.
A lot more to disconnect on a TT.
TT sucks. Currently in the middle of it. Unfortunately my midpipes need to be cut close to the flange, as all the downpipe bolts are seized. Headache and a half, just to find a nasty -9 boost leak near my turbo manifold.
My fuel pressure just had air????
Daetahge Lemons that’s odd...
Hopefully that wasn't the freon port🫠
dont need special tools?....yeah how about you remove that EGR valve with those basic hand tools.
That’s not what the video covered. To remove the motor; no, you don’t need special tools.
Damn buddy you talk to much. Just get to taking out the engine
Do you have any good reference for where harness connections go. I’ve had mine apart for ever and am trying to put it back together however all the connections are very tricky
Muhammad Ollie ummmm. I do not, sorry. There is a diagram on CZP website, however I cannot find it. I have a screenshot of the diagram. Do you have Instagram or something I could send it to you?
WickedWide_Z32 yes my Instagram is bevlesskook