Fun fact: In a Wankel rotary engine, you can actually get increased fuel efficiency by replacing one of the two spark plugs (specifically, the leading plug) with a glow plug.
@@AmaroqStarwind Yeah ... this makes absolutely no sense. You need the spark to ignite the fuel at the proper time. A glow plug isn't going to do that.
@@AmaroqStarwind No worries, I actually used to own a diesel engined car and learned a lot about diesel engines while I owned it. When the engine is cold, glow plugs ensure the diesel fuel can combust and ignite properly upon startup by heating up to a very hot temperature. My presumption is that replacing a spark plug with a glow plug would result in pre-detonation. From what I researched, rotary engines do not experience knock. I read that one reason rotary engines are inefficient is because when the spark ignites, the resulting flame needs to chase the gas inside of the chamber as it rotates. The moving chamber basically forces the unburnt gas away from the initial spark point, making the flame chase the unburnt fuel. This results in unburnt fuel going out of the exhaust. The only possibility I can see with the glow plug working is that it ignites the fuel before the correct spark interval, allowing for a more full burn of the fuel inside the chamber. Alternatively, this can also decrease fuel efficiency since the gas would be igniting before the correct spark interval, meaning that it would likely be working against its own motion. I would honestly love to see the results, but honestly I do not see it working at all since the spark needs to be at the correct interval to ignite the gas efficiently enough to continue the cycle. Theoretically if the glow plug thing was true, someone likely would have had the same results by advancing the ignition timing of the leading spark plug. I don't see the glow plug theory working whatsoever because of these factors to be honest.
With so many other suppliers making LKQ parts, I recommend using OEM parts such as BOSCH due to reliability considered by the vehicle manufacturer. I own a Mercedes and these #glowplugs are a real pita to replace.
not entirely true..glow plug sensors also monitor if combustion pressure had changed and will kick in to aid the combustion process if the ECU notices poor compression in the fuel/air mixture.
Glow plugs are only used when the engine is cold, if it's already warmed up, they are not used. Life expectancy is several years/decades depending on how often you start your engine when cold....
can bad glow plugs cause jumping idle? when i start engine stop at crossroads or just park i feel vibration in cabin and my idle is jumping betwen 900-800 no error codes or dash light on
Hello. Thanks for reaching out. You can take your vehicle to a Bosch Diesel Center and they can help to identify the problem. Here is a link to find a diesel center in your area. ecs.page.link/RC5qq
Hi @leondavis No, a glow plug doesn’t fire like a spark plug. The glow plug is a heating element that increases the temperature of the air and fuel in the combustion chamber typically during cold-starts and during DPF regeneration.
Una pregunta tengo un Isuzu 2015 5,2 npr el glow plug cilindro # 4 al remover el cable de corriente se que bro la parte se arriba del glow plug se quedó el resto del la rosca adentro como le hacemos
I got Passat tdi 2.0 diesel I needs to change one glow plug I get tht I should change 4 of them nd it’s shit on the fuel (diesel) do in think cause of glow plug thts why it’s shit on fuel ???
Hello. I apologize for the delayed response. You can contact a Bosch Diesel Center near you and they should be able to help you with this inquiry. The website below lets you search for a center in your area. spr.ly/6050HbKGK
Hello Sasa, the tightening torque varies from product to product. If you could share more information, like the model or product number, we may be able to help you.
After searching, I wasn’t able to find anything regarding glow plugs for this application. If you can somehow supply a Ford PN, I can try to find a cross that way.
Fun fact: In a Wankel rotary engine, you can actually get increased fuel efficiency by replacing one of the two spark plugs (specifically, the leading plug) with a glow plug.
How does that work? I tried finding information on why this would work, but couldn't find anything.
Source, I guess?
@@Xillios Disregard what I said, because I can no longer find the source :(
@@AmaroqStarwind Yeah ... this makes absolutely no sense. You need the spark to ignite the fuel at the proper time. A glow plug isn't going to do that.
@@AmaroqStarwind No worries, I actually used to own a diesel engined car and learned a lot about diesel engines while I owned it. When the engine is cold, glow plugs ensure the diesel fuel can combust and ignite properly upon startup by heating up to a very hot temperature.
My presumption is that replacing a spark plug with a glow plug would result in pre-detonation. From what I researched, rotary engines do not experience knock. I read that one reason rotary engines are inefficient is because when the spark ignites, the resulting flame needs to chase the gas inside of the chamber as it rotates. The moving chamber basically forces the unburnt gas away from the initial spark point, making the flame chase the unburnt fuel. This results in unburnt fuel going out of the exhaust. The only possibility I can see with the glow plug working is that it ignites the fuel before the correct spark interval, allowing for a more full burn of the fuel inside the chamber. Alternatively, this can also decrease fuel efficiency since the gas would be igniting before the correct spark interval, meaning that it would likely be working against its own motion.
I would honestly love to see the results, but honestly I do not see it working at all since the spark needs to be at the correct interval to ignite the gas efficiently enough to continue the cycle. Theoretically if the glow plug thing was true, someone likely would have had the same results by advancing the ignition timing of the leading spark plug. I don't see the glow plug theory working whatsoever because of these factors to be honest.
With so many other suppliers making LKQ parts, I recommend using OEM parts such as BOSCH due to reliability considered by the vehicle manufacturer. I own a Mercedes and these #glowplugs are a real pita to replace.
I really respect Bosch quality tho,my dad always bought your products.
Glow plugs are only used to start up the engine only? How long does a glow plug expected to last?
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
not entirely true..glow plug sensors also monitor if combustion pressure had changed and will kick in to aid the combustion process if the ECU notices poor compression in the fuel/air mixture.
Glow plugs are only used when the engine is cold, if it's already warmed up, they are not used. Life expectancy is several years/decades depending on how often you start your engine when cold....
can bad glow plugs cause jumping idle? when i start engine stop at crossroads or just park i feel vibration in cabin and my idle is jumping betwen 900-800 no error codes or dash light on
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
Hello. Thanks for reaching out. You can take your vehicle to a Bosch Diesel Center and they can help to identify the problem. Here is a link to find a diesel center in your area.
ecs.page.link/RC5qq
What is typical service life for the glow plug?
When driving does glow plugs cause the engine to fire like a spark plug
Hi @leondavis No, a glow plug doesn’t fire like a spark plug. The glow plug is a heating element that increases the temperature of the air and fuel in the combustion chamber typically during cold-starts and during DPF regeneration.
Wait spark plug and glow plug are diffrent things? And do nowday diesel use fuel injection that have spark plug built in?
Nice demo one of ours broke off not sure what make it was.
Good work bosch
Can self start when glow plugs are on or self start after glow plug is off ?
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
@PuneetRana Can you provide more information on your question please?
One question on common rail engine that i have i have 2 bad glow plugs cause engine shaking when idle?
Hello. Thanks for reaching out. What is the year, make and model of your vehicle? Do you know the part numbers on the glow plugs you currently have?
@@BoschAutoNA its fiat grande punto 2011 year diesel common rail...Bosch 4.4 V model 0 100 266 031 thanks
Which grease can be used for cleaning glow hole?
Sasa Glisic
2006 Vitara
Una pregunta tengo un Isuzu 2015 5,2 npr el glow plug cilindro # 4 al remover el cable de corriente se que bro la parte se arriba del glow plug se quedó el resto del la rosca adentro como le hacemos
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
Hello. Thanks for reaching out. You need to contact the equipment manufacturer (Isuzu) for removal procedure.
Should I use grease / anti seize, if so, which brand or type?
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
I apologize for the delayed response. Our recommendation is that you contact your OE dealer for these type of specifications/instructions.
Ceramic grease
I got Passat tdi 2.0 diesel I needs to change one glow plug I get tht I should change 4 of them nd it’s shit on the fuel (diesel) do in think cause of glow plug thts why it’s shit on fuel ???
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
Hello. I apologize for the delayed response. You can contact a Bosch Diesel Center near you and they should be able to help you with this inquiry. The website below lets you search for a center in your area.
spr.ly/6050HbKGK
how strong (NM) to tight bosch glow plug?
Hello Sasa, the tightening torque varies from product to product. If you could share more information, like the model or product number, we may be able to help you.
Thank you. I will give you more information soon.
I have Duraterm 043
Hi Sasa, thanks for the information. For this product the maximum tightening torque is 15 Nm and the minimum is 10 Nm.
can i get bosch glowplugs for a ford ranger 2010 manufacturer in thialand must heat 2to4 second
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
After searching, I wasn’t able to find anything regarding glow plugs for this application. If you can somehow supply a Ford PN, I can try to find a cross that way.
Id like me some Borsch
Thanks for reaching out. boschautoparts.com is a great resource to find our aftermarket products designed to work best in your particular application.
На вольво хс70 не работают, не успевают прогреться до запуска. Ngk намного лучше. Bosch совсем плохие, не покупайте
Ok
Im pretty sure that diesel engines doesn't use sparkplug or glowplug
As far as i know diesel egnites by the compresion in the cylinder
motorcross stunter did you even watch the video???
I'm pretty sure you don't know what glow plugs are for.
Non technical still exists
Spark plugs are not glow plugs it's different just use your brain and google it en.m.wikipedia.org/wiki/Glowplug
bruh,glow plugs are for starting the engine,the the compression kicks in.
please educate yourself before posting a comment