Thanks for watching! Make sure to subscribe for more weekly videos! I'll be posting a video soon using twisted wire! ruclips.net/user/zurickdesignsjewelryandart
I’m a a/c man. I’ve made many copper cuffs with my scrap. It’s a great way to relive stress. I have a over hundred year old anvil, that had made many a horse shoe. It makes a perfect design, all on it’s own! I like your technique for twisting the wire. Thanks for sharing 😎
It is a good video, I found this helpful, and I think it was great, to be able to see and compare the difference visual effect of each strand of twisted wire, I have tried twisting wire by hand before but it always broke, so this was really interesting to me, i feel i leared some thing. Thank you for making this video, I enjoyed watching your tutorial. Laura in uk
All 3 looks really nice next to each other . It would look cool using all 3 into a design even though it’s a very similar twist , the effect came out different enough to add variety . Thanks so much for making this video . I have a drill I got on Amazon too for jewelry work , but didn’t think of using it to twist wire. Makes the work a lot easier .
So happy to see this. I have such bad arthritis that jewelry making is painful but I like to use twisted wire without having to pay for it. I haven’t been able to do this anymore but after seeing this, I’ll going to buy a drill!
That's freaking ingenious. I haven't done twisting yet ... I've barely learned the basics. I bought a whole bunch of dog colors, gauges, half round, full round, flat etc etc LOL So now I've been watching videos basically all day So I have my own set of pink tools;)😅 including my drill. So tu so mich for this PS, you're videos are amazing. Keep up the great work
When you twist the wire hang the center on a nail with a nice flat head on it or a small screw hook and that will allow a more even grasp on your twisting hand. I have even used small vice grips and secured that end in them and then lay them on the floor and hold in place with my foot. I wish I could remember the name of a tool that I have for twisting wire. It reminds me of an old hand egg beater. You clamp the two loose ends in vice grips and lay the vice grips on the floor and rotate the “beater” using taut tension and within a few seconds you have awesome twisted wire. Thanks for the video you did. I didn’t have a clue how to use a pin vise. I knew it had to be simple though. Thank you.
Thank u I have the pen device I make jewelry but I didn't remember wat was the pen device for .I purchased it like over 3yrs ago .I was going to get back into it never used it n was wondering wat it was for so thank u so much God bless
Thanks for the video. I'm going to try twisting wire to make my jewelry a little more interesting. I just got my pin vise from Amazon and I have a drill so I'll try both to see which one works best for me. I came across your channel today while looking for videos to twist wire and have subscribed. Looking forward to some more of your videos. Keep them coming.
I found a pin vice , that lil hand drill for resin, works really good for twisting wire. I hold the other end with pliers and roll the vice down my thigh while sitting and other end is hovering over the other leg
Wow, the second one that you did I have that instrument and I was trying to do it with the single-strand but it wasn't twisting and instead finally broke off. I did not know that you were supposed to double it. Thank you for the tutorial it was very very helpful. I learned something today.
Great tutorial and thanks for showing us the different methods to get this accomplished. I've learned so much from this channel. Can't wait to to see next weeks vid. Love the Gertie dance at the end! Have a great week!
hi!!! could you please tell what is that handheld vice with the black rubber balls you use in part 1 for clamping the wires in your right hand? there is no mention in the description and I have been trying to find it online but no success so far. Thanks for this video and good luck with your work!!
Thankyou for all that you share with us! Your tutorials are amazing and have helped me so much :-) On the link you gave for the Pin Vise it says it is a drill? If I order that one will it twist wire I don't need a drill thankyou!
@@ZurickDesigns Thankyou so much for your fast reply I do appreciate it! I was confused as to if the drill would twist wire also Thankyou :-) They look a like but the one said drill and buying online I just wanted to make sure~ Thankyou for your time 🙂
Thanks so much for the link to the clamp you use. I order a lot from wire jewelry.com but just from Amazon so now that I'm registered directly to them I'll be getting a lot of great discounts and fun free tutorials.
OMG...took a woman to give us a way to twist wire!!! I tried the "tool" and no way! You would have to have bionic hands to tighten the tool. Thanks for the laugh in trying to use that silly thing. I loved your idea of the drill...that's my go too tool when wrapping wire.
Thanks for watching! Make sure to subscribe for more weekly videos! I'll be posting a video soon using twisted wire!
ruclips.net/user/zurickdesignsjewelryandart
I already subscribed and hit the notification bell, lol ❤
I’m a a/c man. I’ve made many copper cuffs with my scrap. It’s a great way to relive stress. I have a over hundred year old anvil, that had made many a horse shoe. It makes a perfect design, all on it’s own! I like your technique for twisting the wire. Thanks for sharing 😎
That’s awesome! Thanks for watching!
Using the drill to twist the wire is genius, thank you!
It is a good video, I found this helpful, and I think it was great, to be able to see and compare the difference visual effect of each strand of twisted wire, I have tried twisting wire by hand before but it always broke, so this was really interesting to me, i feel i leared some thing. Thank you for making this video, I enjoyed watching your tutorial. Laura in uk
Glad you enjoyed it! ☺️💜
This is so beautiful. I love how the three different finished wires look together too. ❤
Thanks! 💜☺️
All 3 looks really nice next to each other . It would look cool using all 3 into a design even though it’s a very similar twist , the effect came out different enough to add variety . Thanks so much for making this video . I have a drill I got on Amazon too for jewelry work , but didn’t think of using it to twist wire. Makes the work a lot easier .
Yes it does! I love it!
Agreed. I was thinking the same thing.
If you already do not know, i have seen it done elsewhere, roll the pen vice across the table for quicker twists. Great video. Thank you.
Good tip! 👍🏻
So happy to see this. I have such bad arthritis that jewelry making is painful but I like to use twisted wire without having to pay for it. I haven’t been able to do this anymore but after seeing this, I’ll going to buy a drill!
Glad I could help! I have arthritis in my thumb and it really slows me down!
I like all three methods. Thanks for sharing
We can also use out flex shafts. Also helps to anneal the wire.
Love twisted wire 🤩🤩🤩🤩🤩💖💖💖💖
Three different looks all very nice! Thanks
Thanks! I’m working on a piece with a shark tooth, so this was perfect for me. I’m excited to bring this to life!
Wonderful!
Like these wires!! Good for rings,bracelets. Thank you for sharing!👍👍🐶🥰🥰❤️❤️💕💕🇬🇧🇬🇧
This is helpful. Thank you
What kind of clamp is that? I love this. Seems so easy and they look really beautiful
That's freaking ingenious. I haven't done twisting yet ... I've barely learned the basics. I bought a whole bunch of dog colors, gauges, half round, full round, flat etc etc LOL
So now I've been watching videos basically all day
So I have my own set of pink tools;)😅 including my drill. So tu so mich for this
PS, you're videos are amazing. Keep up the great work
That’s awesome!
Thank you very much! ☺️💜
When you twist the wire hang the center on a nail with a nice flat head on it or a small screw hook and that will allow a more even grasp on your twisting hand. I have even used small vice grips and secured that end in them and then lay them on the floor and hold in place with my foot. I wish I could remember the name of a tool that I have for twisting wire. It reminds me of an old hand egg beater. You clamp the two loose ends in vice grips and lay the vice grips on the floor and rotate the “beater” using taut tension and within a few seconds you have awesome twisted wire.
Thanks for the video you did. I didn’t have a clue how to use a pin vise. I knew it had to be simple though. Thank you.
That’s cool!
Thank u I have the pen device I make jewelry but I didn't remember wat was the pen device for .I purchased it like over 3yrs ago .I was going to get back into it never used it n was wondering wat it was for so thank u so much God bless
It’s a pin vise. I use it to twist wire
Thanks for the video. I'm going to try twisting wire to make my jewelry a little more interesting. I just got my pin vise from Amazon and I have a drill so I'll try both to see which one works best for me. I came across your channel today while looking for videos to twist wire and have subscribed. Looking forward to some more of your videos. Keep them coming.
That’s awesome! Thanks so much! 💜☺️
Thank you for sharing this. I can't wait to start. This video make this easier now. 😁🤗🙏
You are so welcome!
Thnk u for sharing
Thanks for watching! 💜☺️
Thank you!
Thanks for watching! ☺️💜
Thank u very much🌸💕☺️🙏🏻
Always welcome ☺️
Great video. Do you have a video making a wire wrap for a pendant with twisted wire?
Here’s one with braided wire…
ruclips.net/video/8SiT1wOltQg/видео.htmlsi=AH9TntCpcb1cYnIJ
Good video!
Thanks!
Thank you! Very helpful
Thanks 💞🙏
Thank you for sharing
Thank you ❤
You're welcome 😊💜
Nice!!
Thank you
☺️💜
Thank you so much 💖
You’re welcome!
Happy New Year! 🎊
Very nice technique 👌
I found a pin vice , that lil hand drill for resin, works really good for twisting wire. I hold the other end with pliers and roll the vice down my thigh while sitting and other end is hovering over the other leg
Sounds acrobatic! Lol
Great tutorial! Thank you!
Liked it more than I thought I would. 💕
Quick question, could you do a tutorial on how to make a small crown 👑 using wire wrapping? Like to fit on a doll or figurine.
I could work on a ring that could for a doll!
Thank you, great tips! I would be so glad to see what can ne done with this wire.
But they are all so butiful!! Thank You....
Thank you too!
Wow, the second one that you did I have that instrument and I was trying to do it with the single-strand but it wasn't twisting and instead finally broke off. I did not know that you were supposed to double it. Thank you for the tutorial it was very very helpful. I learned something today.
Awesome! ☺️💜
So pretty! Thank you so much for the wonderful tutorial.
Thanks for watching! ☺️💜
Can u plz show us how to make loops at the end of twisted wire
Thank you for your good and helpful video 😁 really different look
Great tutorial and thanks for showing us the different methods to get this accomplished. I've learned so much from this channel. Can't wait to to see next weeks vid. Love the Gertie dance at the end! Have a great week!
Thank you!! ☺️💜
Very informative tutorial. Thanks for sharing 👍.
Thanks for watching!!
Thank you 😊 lovely Artist 💋
Thanks for sharing. Really great tips. 👌👍💕
Amazing work!! Thank you so much for sharing ‘ you’re amazing !🥰
Thanks so much! ☺️💜
Great! Tx.
hi!!! could you please tell what is that handheld vice with the black rubber balls you use in part 1 for clamping the wires in your right hand? there is no mention in the description and I have been trying to find it online but no success so far. Thanks for this video and good luck with your work!!
I didn’t realize
Here’s the link…
Wire Jewelry Cushion Clamp: www.wirejewelry.com/special-offer/Wire_Jewelry_Cushion_Clamp_Pack_of_1-29530-.html
What are the vice grip pliers you use in the hand twist called?
Pin vise 💜☺️
Way cool. Are u going to do any videos jewelry pieces with these wires that u just showed us how to make?
Yes! ☺️
Thanks ❤️🇩🇰
Nice❤❤❤❤
Thankyou for all that you share with us! Your tutorials are amazing and have helped me so much :-) On the link you gave for the Pin Vise it says it is a drill? If I order that one will it twist wire I don't need a drill thankyou!
🤔
I’ll check it…
It looks like the right tool. It says hand drill.
@@ZurickDesigns Thankyou so much for your fast reply I do appreciate it! I was confused as to if the drill would twist wire also Thankyou :-) They look a like but the one said drill and buying online I just wanted to make sure~ Thankyou for your time 🙂
dang I have been doing it by hand and wondered if there was easier ways ....
Ty for sharing
You are so welcome
Do you need to hammer it before using it for any wrapping project?
I don’t personally
@@ZurickDesigns ok thank you 😊
I think I must have missed it, but whats the name of the first tool you used to hand twist?
Pin vise
Thanks so much for these useful ideas. What is the little tool with the round black rounder grips and where can i get one?
Wire Jewelry Cushion Clamp: www.wirejewelry.com/special-offer/Wire_Jewelry_Cushion_Clamp_Pack_of_1-29530-.html
Thanks so much for the link to the clamp you use. I order a lot from wire jewelry.com but just from Amazon so now that I'm registered directly to them I'll be getting a lot of great discounts and fun free tutorials.
❤
@@michelletanner948 that’s great
What was that little tool you used to hold the wire?
It was silver with the 2 little black things on it
thanks ^.^
Wire Jewelry Cushion Clamp: www.wirejewelry.com/special-offer/Wire_Jewelry_Cushion_Clamp_Pack_of_1-29530-.html
Can u tell me what that clamp is called or where I can get it
Wire Jewelry Cushion Clamp: www.wirejewelry.com/special-offer/Wire_Jewelry_Cushion_Clamp_Pack_of_1-29530-.html
IF YOUR WIRE IS [SAY] 12" HOW LONG [ABOUT] WILL IT BE WHEN YOUR DONE TWISTING IT
THANK YOU FOR YOUR VIDEO AN YOUR TIME
It should be too much shorter
What’s that tool wit black tips
Wire Jewelry Cushion Clamp: www.wirejewelry.com/special-offer/Wire_Jewelry_Cushion_Clamp_Pack_of_1-29530-.html
Tht was the kookiest trick ..🤗🤗🤗🔥🤗🤗🤗Thnk beautiful Princess 👸🏻
Princess so you’ll b forever young💋🙏🏾🌟🤗❤️🕯🌏
Thank you! ☺️💜
Where do you purchase your wire from?
Copper from Parawire or Rio Grande.
Sterling from Monsterslayer.
How do you twist a single wire ?
If it’s square wire you can use a pin vise
OMG...took a woman to give us a way to twist wire!!! I tried the "tool" and no way! You would have to have bionic hands to tighten the tool. Thanks for the laugh in trying to use that silly thing. I loved your idea of the drill...that's my go too tool when wrapping wire.
Most definitely! 😃
In aviation we use a wire twister, it's very easy use..
Cool!
First way is if you don't have any tools just pull out your clamp and pliers
Thank you 😊
Thank you so much