How to build a solid lightweight and high wooden car ramp, with shelves for tools
HTML-код
- Опубликовано: 6 май 2020
- Sometimes however you might need easier access to the under body with more room to maneuver. When you are changing oil, perform service or working on exhaust, skid plates or control arms etc. you could use ramps to drive on top of, to get more room under your vehicle. Using ramps is easier and quicker that jacking up the entire vehicle and setting up four jack stands.
There are several options available if you decide to purchase car ramps, many made of plastic, and some is expensive, some shipping is more expensive than the ramp self.
After considering all the pros and cons, I decided that I would rather make my own ramps and make them out of material that will definitely support the weight of my vehicle - wood, In addition, custom build them to fit my car and the height that I prefer and cost less money. In addition, I do not have place inside to store them when they are not being used, and impregnated wood can stay out many years with now problem.
Building your own set of DIY wooden car ramps is a very easy project. If you have all the materials and tools ready, it should take less than a couple hours to complete all tow ramps.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Please subscribe To My Channel and Get More Great Tips and tricks.
Make sure to Like, favorite and share this video and subscribe if you haven't do so already at:
/ @thinktechnikk
Share this video with a RUclipsr friend:
• How To Replace Tesla M...
• How to build a solid l...
• How to Change Front Br...
Let's connect:
moghennavid@gmail.com
/ navid-mog
/ navid.moghen
Music:
ruclips.net/user/audiolibrary... 
Авто/Мото
Remember when wood was affordable? Nice ramps though 👍🙈🤣
Exactamente la madera tienen un precio muy alto, prefiero subir y bajarlo y ponerlo en burro
Хочешь отвезти девушку в дорогое место? Своди её на лесопилку))
I've made a pair of my own. They work better than expected. Serviced easily two of my cars this summer. Thumbs up for the idea.
Awesome ramp! And the best part was using the ramp as a coffee bench. 😊
So far it's the best wood design.!
Your ramp design allows for tools and parts shelves, very handy, I like it!👍
Absolutely the best I ever seen. I build it and I am very satisfied 😌 😀👌👌👌👌👌👌👌
Скаты надо делать съёмными удобней работать, а так все СУПЕР
Автор молодец. Самый удачный деревянный вариант из всех просмотренных. Расейские вообще какая-то муть. Сделал по указанным размерам, доски взял толщиной 25 мм и шириной 100 и 150 мм, общая ширина 250 мм, вполне достаточно, количество промежуточных опор из доски 50х100 мм увеличил вверху до 5-и, внизу до 6-и, и ещё две опоры под наклонной доской в промежутках. Размеры определены идеально, угол наклона доски позволяет заезжать и съезжать без касания о неё передним бампером даже Матизу 0.8. А у него очень маленькие колёса. Общая высота эстакады 270 мм, вполне себе приемлемо, под машиной можно свободно работать. Дёшево и сердито.
Ещё можно в гараже подвесить и использовать как полки)
Скажите есть размеры данной эстакады.
You have some real good skills! pleasure seeing you in this!
oh wow look at the room under that's awesome! great job
Installed wheels. Carries them lol great job. Honestly? I'd install more uprights. Any gap could be a mishap. Even bidirectional. It simply means they can not collapse.
This is awesome dye Thanks
I build it and its work perefectly for my SUV👌👍👌
Just what I was looking for, well done.
Thank you so much Jim:) Glad you liked it.😀👌
Excellent work thanks 👍👍👍👍👍
Excelente ideia ...parabéns 👏👏👏
good work…
enjoy your cookie and coffee 👍🏻
Thanks body 😂😂👍
Nice video. But I will stack my boards since I will be using them long term and on semi trucks! I like your wheels and storing them as a bench.
A good invention !!!
Like #11 👍👌
Thanhks
Thanks for sharing.
Thanks for sharing
enjoyed watching (A+)
Thank you bro
Two fold Love the bench
Nice Tesla pants! 🙂
Looks like a house of cards. Hopefully there’s enough material there if it were to collapse to keep the vehicle from coming all the way down on you.
I was thinking same thing. If nothing else at least some 2x4's down the middle to provide longitude support.
good stuff
Good job thanks made one
Might want to substitute 4x4s instead of the 2x4s less likely to rack on you.
It shouldn't rack with the triangulation, IF he screwed the acute angle together at the ramp entrance, which I didn't see him do, but maybe I missed it.
You must be an engineer. I’ll stick with what I originally said.@@allegory7638
Jest super
M-ai inspirat și pe mine :D
Good
Nothing at all wrong with those plus you get to use them as a bench well done! 👍
A slight improvement would be to use threaded bar instead of screws if you have some.
Молодец !
👍👍👍👍👍👍👍👍👍
В России за 70$ сделают из металла😅. А так не плохо, своими руками. Если бы ещё выложили схему с размерами, то было бы ещё лучше. И нужно обязательно покрасить или покрыть лаком.
Perfeito.
If you put two more castors on the end you could stand them upright and push them in a corner.
Anyone help me out? I was thinking of extending this to fit the entire car but i feel like that's too heavy
Quelle sont les dimensions des rampes ? Hauteur et longueur des rampe svp, quelle bois utiliser vous ?
바로 이거야~~^^
I would like to build a wooden ramp in the shape of a right-angled triangle with horizontal slats, it will be placed between the two iron ramps in the event that the car ends up in the empty space between them, which is 57 centimeters away.It's improbable the car could drive over the empty space, but when I get off I always fear that it could happen.
I was wondering how I can tell if the wooden ramp will be suitable for cars.
Stack the wood in layers like paper and they will not fail.
This time I will do it manually with the help of Stodoys plans designs.
😀👌👌👌
Loved your work, may I know the entire length of the ramp total height of the ramp the length of the slope
Kann man die auch auf eine Höhe von 450mm bauen? Wäre angenehmer unterm Auto zu arbeiten. Und wie sieht es aus das man hinten auch noch mit hoch kommt?
Hi, great video, what is the thickness and width of the wood u used ? :)
See picture 0:41 , here are all you need
@@ThinkTechnikk Oh thank you, I probably watched whole video and skipped that part :D
Add some skateboard grip tape on top.
If he can build these ramps he needs to build a workbench! Get the heck up off the ground. Nice ramps, btw.
This is something I can build,my dilemma is,for $70 I can buy metal ramps and avoid the labor of building these heavy ramps.The prices of everything now days including lumber makes these practical projects,impractical.I had build my wooden ramps as a teenager to service my 68 GTO in 1968,I wish I had them now.
These are taller and more stable
I wouldn’t trust my life to $70.00 ramps. Not a chance.
Now the only thing I’m missing is a driveway.
Hi what degree of angle did you use?
14 degree. Better watch my other drawing video for more detail. At 0:29 here ruclips.net/video/kmy_dOAA_1Q/видео.html&ab_channel=ThinkTechnikk
Hi. How much would the wood cost today if bought from home depot?
Different location different price ,
Will it work fine with front wheel drive?
I'm afraid it could launch back if it slips.
Btw, that's really expensive.
absolutely
Buna seara!
Ce dimensiune ai folosit la burghiu?
Mulțumesc!
Please see 0:43
Can passibly Paint the woods rampete u build?
Yes of course, the wood is paintable, but this wood is impregnated which means is waterproof and tolerate a lot of weight 👌 its up to you than
ramp design allows for tools and parts shelves, very handy,
1:58
Mursement one: 230mm,
2:12
Mursement Tow: 480mm,
2:20
Mursement Three: 900mm,
4:24
You should drill 4 hole for 4 screw for each lumber, i did it later when i install the lumbers.
And if your wood is impregnated maby you do not need drill holes at all.
As i did not drill hole for the 2 other screws on the lumber. The bolt goes through without cracking the wood.
Just remember, not certified so if it fails and someone gets hurt, YOU go to jail
Just remember, anyone can sign a waiver ........... Use at your own risk.......
@@rh7163 waivers don’t stand up in court, you should know that. Manslaughter overrides a waiver every day of the week.
crappy music
not for serious jobs
786