Talk about firing the parts cannon! It's got a skip in one cylinder so it needs a new computer? Ivan, you saved this guy lots of cash & aggravation! WTG!
Never do a one Valve Valve job you’re just asking for trouble down the road. When you get the head of the vehicle do a complete head overhaul and even shave the head.A rounded valve margin or valve touliping is a sign of trouble which could also be caused by a Loose valve guide. Tearing down motors for 20 years I have learned that the first thing to go on most engines the top ring on the piston, exhaust valve guide and/or exhaust valve.Back in the 80s, LOL I saw my first endoscope in a Mercedes-Benz dealership and it blew my mind. Great review. Keep on rockin
I just got the carnage tools endoscope and it WiFis to you phone. Love it. Had a 2014 f150 no crank and found rodent damage under the engine compartment fuse box
For what he spent in plugs and coils a cheap compression gauge or cylinder leakage tester would have found it in 30 minutes tops. Good find with the camera.
Temnykh's Toys: fun and useful. I talk to 2 of my neighbors about their farming techniques 2 to 3 times a year at most. If I were your neighbor I would have to visit once a month. I have never seen a side view scope--that is clever.
I have the Teslong 450 dual camera and it also works great for under $100.00 on Amazon. Really good video very crisp. I could read the numbers on the piston of a chainsaw.
Thanks for the detailed and interesting theory of a possible cause but I still think a quick comparison of all the cylinders would be where I would start
Tuesday McNamara will clean "Idle Air" something; Thought it would take R&R but Steve says just to clean it▬ 2001 Silverado W and likely low compression on #1 but attained stable improved by use of Iridium Distributor cap
95% of computers replaced by weekend mech are good, no diag skills must be computer then. And more problems are created by bad cheap after market parts, then Ivan gets it. Sometimes diag is 90% of repair.
I literally just did this an hour ago for a P0300 on an LS2 engine. Cylinder 6 plug was cracked. Bank 2 O2 went bad as well from dumping fuel for too long.
What's the right fix for the valve job... Do you take the cylinder head to the machine shop and replace the bad valves or do you get the whole cylinder head fix with a complete valve job?
@@PineHollowAutoDiagnostics I'm a little confused... You diagnosed, one burned valve! Self-Tech's working from home with experience can replace a burn valve without removing the cylinder head. But, should the one burn valve be replace or remove the cylinder head and get a complete valve job repair? I say just replace the one burn valve with a OEM part and that should fix the misfire? Awesome work and videos! Thanks!
Easy and cheap repair , if the valve are not bend then, adjust the valve and add 0.5 mm extra valve clearance drive the care the valve will most likely reseal , check valve clearance after a month leave it lose for another month , your car should be back to full compression
I just have to laugh when the auction guy says it must be the computer. When in fact with most any electrical issue, that's what I look at as last on the list of possibilities. I like that scope, affordable too. Just curious if you do an injector leakdown test when you have a valve problem like that, or do you check that when the valve has a chunk of metal out of it?
They should have called you from the start, people can't help being stupid ha ha :-D Such a crisp and bright picture from the camera :-D I would imagine they could get away with a new valve and seat grinding. Maybe they find a head from a car scrap yard.
i wonder if the guide backed out/moved or ran low/out of oil and the timing set is shot, it's possible to bend a single valve out of a pair, tolerances are never perfect. only other thing, is the seat moved from being overheated, which would mean warped head, gasket, block sealer in it. best bet, just slam in used engine
I'd say head ,gaskets and timing set. Because new complete head is around the same price as sending it to the machine shop. Used head from the salvage yard would be even cheaper but then you take the chance of being in the same spot. And I say the timing set because odds are it hasn't been done but that's where you talk to the customer oh wait auction car so he doesn't know.
@@shaunadams3170 usually when i find low compression on one cylinder i condem the engine and its about the same price to do engine swap than a head swap here in new York city.
One other cylinder showed 1% and it says "OK", so it must mean 17% reduction, not 17% left (if the number has real meaning as Ivan says in his comment)
That the way the industry is pushing. Throw parts and if that doesn't work it has to be the computer or module. When they could have spent the money wisely and diagnosed properly and spent the money fixing it right the first time
what bothers me about these cameras is they usually come with crappy image quality where nowadays cell phones have 41mp cameras on them and 4k screens . we get the image quality of a motorola razr from 2006
I swear I saw dents in the piston and corresponding dents in the exhaust valves, in piston heads could be fly cuts or casting impressions to give clearance for valves but never in valves because they are usually set up to rotate to reduce wear and localized heating, odd.
@@bryanlatimer-davies1222 A look at the bottom side of the head would be more practical, if the engine has high miles and the oil pump is at rear of engine, it's not uncommon for the valves in No. 1 cylinder to get sluggish from oil starvation and over heating, the oil is also a coolant. I've seen computer simulations of worn guides with insufficient lube, worn valve stems in said guides, high rpm, high heat and a peculiar thing occurs a harmonic vibration is set up and causes the valve stem to rock in the guide and for a micro-second the valve locks and is struck by the piston, also because of uneven oil distribution the front valve springs usually relax, old age helps.
amzn.to/2O7qVge Display ist scharf und hell. Die Displaydarstellung lässt sich per Knopfdruck auch in je 90 Gradschritten drehen, falls das Gerät ungünstig liegt oder der Kamerawinkel nicht passt.
never fails as soon as I buy a million dollar snap on here comes a camera that has twice the functions for a tenth the price. thanks for ruining my millennium Ivan. great video though, ha!.
That's cheating, but I cheat as well, just hook the air into the cylinder and listen for escaping air. I don't do traditional leak down testing, don't even own a tester. As a retired heavy line tech from Ford dealers it was never a necessity. Management wanted me to have one, but what the hell do they know. I always had some idiot manager second guessing my work, but every time they challenged me, I proved they were full of shit. I took to working under the maple trees at home rather than constantly battling idiot managers. That same dealer in Santa Barbara was closed by Ford for fraud perpetrated by these same managers. The Ford rep said "Congratulations, you guys are number one in the nation, on warranty claims, I am here to audit you" That is when I decided to move out of State and do my own thing. I didn't mind service writers, but, managers are totally useless.
@@PineHollowAutoDiagnostics Go on then I'll forgive you this once, seeing on your reccomendation I bought the Teslong 500. It's awesome! Thanks Had to use UK Amazon as yours wanted more than the camera for shipping
![YoungBoy Never Broke Again - Sneaking [Official Video]](http://i.ytimg.com/vi/1ILUps2zDFU/mqdefault.jpg)
Talk about firing the parts cannon! It's got a skip in one cylinder so it needs a new computer?
Ivan, you saved this guy lots of cash & aggravation! WTG!
Nice find brother. Nothing like pictures to prove the theory!
Thanks Joe! Definitely faster and more fun than a leak down check lol
@@PineHollowAutoDiagnostics and you know for definite that the valve is bad Whitout ripping the engine apart those cameras are so handy
The quality of that endoscope image is very impressive. Thanks Ivan!
yeah! its made in russia. SKOLKOVO! BEST QUALITY AND ENGENEERING in the world
Never do a one Valve Valve job you’re just asking for trouble down the road. When you get the head of the vehicle do a complete head overhaul and even shave the head.A rounded valve margin or valve touliping is a sign of trouble which could also be caused by a Loose valve guide. Tearing down motors for 20 years I have learned that the first thing to go on most engines the top ring on the piston, exhaust valve guide and/or exhaust valve.Back in the 80s, LOL I saw my first endoscope in a Mercedes-Benz dealership and it blew my mind. Great review. Keep on rockin
I got the exact same one! I love it. Small head. Dual camera. Big screen. Many functions. Perfect for diagnosis. Thanks Ivan.
Bore cams have gotten so good it is amazing. I remember the old grainy black n white 2 inch screen ones that cost an arm and a leg.
Same with all tech.
I just got the carnage tools endoscope and it WiFis to you phone. Love it. Had a 2014 f150 no crank and found rodent damage under the engine compartment fuse box
Excellent diagnosis video & tool as always Ivan. 😊👍
excellent work tool, I already bought it, waiting for it to arrive to test it in my technical service, thanks for showing how it works.
For what he spent in plugs and coils a cheap compression gauge or cylinder leakage tester would have found it in 30 minutes tops. Good find with the camera.
One of ur coolest vids, what a great test ford let’s u do on cylinder balance, wish gm had that
Wow, what a timesaver, great tool
Temnykh's Toys: fun and useful. I talk to 2 of my neighbors about their farming techniques 2 to 3 times a year at most. If I were your neighbor I would have to visit once a month. I have never seen a side view scope--that is clever.
I have the Teslong 450 dual camera and it also works great for under $100.00 on Amazon. Really good video very crisp. I could read the numbers on the piston of a chainsaw.
Very cool Ivan!
Thanks ivan! This cam quality looks very good for the price
Nice demonstration rare view and correct identification of trouble.🙏⭐⭐⭐⭐⭐🔧🕺💐
That tool is really impressive!
Just purchased this Camera. Thanks ! Great Diag.
Thanks for the detailed and interesting theory of a possible cause but I still think a quick comparison of all the cylinders would be where I would start
Nice tool, keep sharing the good tools and tell us about the bad.
Wow, dang cool nifty device!!! I like it alot. Great demo!
Nice bore scope, and nice find.
Amazing twin views, picture quality .
Great work Ivan.
That camera is slick.
WOW I expected the price of that cam to be way more! I think I'm gonna get 1!
I hope those piston nicks are indeed cutouts for valve spaceing when tooling virgin engines.
Tuesday McNamara will clean "Idle Air" something; Thought it would take R&R but Steve says just to clean it▬ 2001 Silverado W and likely low compression on #1 but attained stable improved by use of Iridium Distributor cap
Powerful testing 👍
Can you save the pictures and print them of the 2 valves to show the customer?
Very cool tool!
Please let us know the final results after the customer gets the Valve Job...Would a chemical cleaning be worth a try before the Valve Job?
Most Interesting and Informative. Thank You Kindly.
pine hollow discount colonoscopy???
No parts required!
Bonus footage
🤣
You would have to go in through the exhaust valve.
lmao, yall killing me
Hi Ivan, some questions: Can you playback videos/images from NTS500?
Can Launch works on hybrid & Tesla cars & reset/program TPMS for vechiles?
Ivan,
Great video, diag - thank you! How many miles on that Escape?
God bless
Paul (in MA)
Great video Ivan,thank u
95% of computers replaced by weekend mech are good, no diag skills must be computer then. And more problems are created by bad cheap after market parts, then Ivan gets it. Sometimes diag is 90% of repair.
I like the diag. Is it worth asking why one valve did that? Maybe it’ll happen again. (It’ll be another owner by then.)
I literally just did this an hour ago for a P0300 on an LS2 engine. Cylinder 6 plug was cracked. Bank 2 O2 went bad as well from dumping fuel for too long.
Launch is a nice tool to have. Tell me have you used it enough for it to pay for its self ?
As many times as I've seen him use it on here I'd say oh yeah. It carries it's on weight.
It paid for itself in like one day 😅
@@PineHollowAutoDiagnostics Ну это преувеличение! Мне не верится...
Very nice video, thank you.
What type of scan tool are you using?
Hey so cylinder 1 will need a new spark plug? Or what else will be done?
What's the right fix for the valve job... Do you take the cylinder head to the machine shop and replace the bad valves or do you get the whole cylinder head fix with a complete valve job?
I would start with a good machine shop. They will tell you if it can be fixed 👍🙂
@@PineHollowAutoDiagnostics
I'm a little confused... You diagnosed, one burned valve! Self-Tech's working from home with experience can replace a burn valve without removing the cylinder head. But, should the one burn valve be replace or remove the cylinder head and get a complete valve job repair?
I say just replace the one burn valve with a OEM part and that should fix the misfire?
Awesome work and videos! Thanks!
That was pretty cool.
I can’t believe someone thought it needed a computer. They need to quit their day job and try flipping burgers.
They specialize in buying and selling cars, not diagnosing them! That's where I come in :)
Pine Hollow Auto Diagnostics yes you do. Love your vids.
That is 😎. Nice one
man, no bonus footage! Cool tool.
Easy and cheap repair , if the valve are not bend then, adjust the valve and add 0.5 mm extra valve clearance drive the care the valve will most likely reseal , check valve clearance after a month leave it lose for another month , your car should be back to full compression
Love your videos buddy
Thanks for watching Jeremy!
Awesome vid....
I just have to laugh when the auction guy says it must be the computer. When in fact with most any electrical issue, that's what I look at as last on the list of possibilities. I like that scope, affordable too. Just curious if you do an injector leakdown test when you have a valve problem like that, or do you check that when the valve has a chunk of metal out of it?
Good question. Apparently just a defective valve on this one, surprised how good the other exhaust valve looked!
They should have called you from the start, people can't help being stupid ha ha :-D
Such a crisp and bright picture from the camera :-D
I would imagine they could get away with a new valve and seat grinding.
Maybe they find a head from a car scrap yard.
At TDC for that cylinder inject air and listen for air leaks at tailpipe(exhaust ) or air box or pvc
Yeah, and give me a slice.
I think Eric at SMA would have brought out the smoke machine just to play some more...
What scan tool is that ?
How do you like that launch scan tool? On the market for one.
He loves it. Has had it for a while. Check his videos, he does a comparison with a couple of other scan tools.
love the tool great video may i ask where did you buy the tool i only see it on ebay ?
www.amazon.com/dp/B07SQ4FLYX/?ref=exp_pinehollowautodiagnostics_dp_vv_d
thanks
Like #82
Thanks for the video!
Thanks for the 👍Dan!
i wonder if the guide backed out/moved or ran low/out of oil and the timing set is shot, it's possible to bend a single valve out of a pair, tolerances are never perfect. only other thing, is the seat moved from being overheated, which would mean warped head, gasket, block sealer in it. best bet, just slam in used engine
So how does this get fix , new valves or new engine?
I'd say head ,gaskets and timing set. Because new complete head is around the same price as sending it to the machine shop. Used head from the salvage yard would be even cheaper but then you take the chance of being in the same spot. And I say the timing set because odds are it hasn't been done but that's where you talk to the customer oh wait auction car so he doesn't know.
@@shaunadams3170 usually when i find low compression on one cylinder i condem the engine and its about the same price to do engine swap than a head swap here in new York city.
@@JuanOrtiz-mo8be very true it is cheaper to do the whole engine here too
Here in Russia, head repair will cost 1/4 the cost of a contract engine. They always repair their own head.
So could you apply some lapping compound through the spark plug hole and get the job done without removing the head? Hmmm
I tried that on my old Mazda van... Didn't really help. It's been running with a leaky valve for the last 5 years 🤣
@@PineHollowAutoDiagnostics lol well damn, worth a shot
I love those used car guys, I change the spark plugs, that didn't work; I guess I'll change the computer next
Does that relative compression test mean it's down 17% or it's only contributing at 17% of factory-recommended compression?
I think it's an arbitrary number...
One other cylinder showed 1% and it says "OK", so it must mean 17% reduction, not 17% left (if the number has real meaning as Ivan says in his comment)
@@gorak9000 thanks, I didn't really pay attention to the other cylinder test results.
How many miles? I think Eric O had one like that with a chunk missing out of a valve,
Yes, he did.
Auction guys.. "I cant figure it out.... it must need a computer! Think about that for a minute... What does it say about the auction guy?
That the way the industry is pushing. Throw parts and if that doesn't work it has to be the computer or module. When they could have spent the money wisely and diagnosed properly and spent the money fixing it right the first time
That it's clueless about proper diagnosis
@@shaunadams3170 And if that doesn't cure it send it to the scrapyard NEXT.
He knows jack about autos.
@@QBRX his best move was knowing Ivan
Oh great more toys for my Dear Santa list
I have a snap on one with a dual camera and has good picture, i want to say the screen on this one looks bigger and probably a lot cheaper! lol
what bothers me about these cameras is they usually come with crappy image quality where nowadays cell phones have 41mp cameras on them and 4k screens . we get the image quality of a motorola razr from 2006
The image quality is pretty amazing considering it has two separate cameras on the tip of a thin flexible wand!
@@PineHollowAutoDiagnostics its better than most but i mean just in general these things lack compared to current technology😂
@@PineHollowAutoDiagnostics Иван, почему бы не предоставить нам файлы с SD-Card? Мы могли бы увидеть все это потрясающее качество изображения...
6th. Keep'em comin'!
COOL
How does the computer calculate compression?
I imagine it has the ability to measure starter current draw from the battery. The same way you would look at it on a scope.
Do a water test on valves.
CAT makes a thermal camra in a phone verry good resolutions
I swear I saw dents in the piston and corresponding dents in the exhaust valves, in piston heads could be fly cuts or casting impressions to give clearance for valves but never in valves because they are usually set up to rotate to reduce wear and localized heating, odd.
I guess a look down another cylinder would tell all
@@bryanlatimer-davies1222 A look at the bottom side of the head would be more practical, if the engine has high miles and the oil pump is at rear of engine, it's not uncommon for the valves in No. 1 cylinder to get sluggish from oil starvation and over heating, the oil is also a coolant. I've seen computer simulations of worn guides with insufficient lube, worn valve stems in said guides, high rpm, high heat and a peculiar thing occurs a harmonic vibration is set up and causes the valve stem to rock in the guide and for a micro-second the valve locks and is struck by the piston, also because of uneven oil distribution the front valve springs usually relax, old age helps.
hey bro what's up haven't seen you for a while. Guess out thank you play service
For what they spent on the parts cannon, they could have bought that scope and saved time!
Even a tiney scratch on a valve will be compression loss and a misfire! 😂
I have a cheap one I bought. It’s picture is not as nice as that one.
Had one of those in the Navy
It was huge and cumbersome but that is some slick. Almost like cheating!! 🤣😉
white crust on top of the valve is usually from coolant leaking on the valve, (blown head gasket. tell him its time for a headjob.,.,
Im not buying that that little bit of deposit on the valve seat is the problem .
Saweet
it's a ford, there's a valve opening issue
Compression test
amzn.to/2O7qVge Display ist scharf und hell.
Die Displaydarstellung lässt sich per Knopfdruck auch in je 90 Gradschritten drehen, falls das Gerät ungünstig liegt oder der Kamerawinkel nicht passt.
never fails as soon as I buy a million dollar snap on here comes a camera that has twice the functions for a tenth the price. thanks for ruining my millennium Ivan. great video though, ha!.
I only own one Snap On tool... My trusty Verus Pro!
@@PineHollowAutoDiagnostics I hear they are stopping the updates for that one soon! Love your vids, and the tackle any problem attitude.
Stuck open valve! 😂
OK, the valve is bad, but that does not prove it does not need a computer. Haha.
lol, the all new 3 and 1/8th cylinder ford :)
My Doctor uses this endoscope to get cancers out of my....well you know.
That's cheating, but I cheat as well, just hook the air into the cylinder and listen for escaping air.
I don't do traditional leak down testing, don't even own a tester. As a retired heavy line tech from Ford dealers it was never a necessity.
Management wanted me to have one, but what the hell do they know.
I always had some idiot manager second guessing my work, but every time they challenged me, I proved they were full of shit.
I took to working under the maple trees at home rather than constantly battling idiot managers.
That same dealer in Santa Barbara was closed by Ford for fraud perpetrated by these same managers. The Ford rep said "Congratulations, you guys are number one in the nation, on warranty claims, I am here to audit you" That is when I decided to move out of State and do my own thing.
I didn't mind service writers, but, managers are totally useless.
Did my wifes coloscopy with one, no polyps!
Definitely needs a computer 🤣🤣
You're to young to remember, but Fords aren't with fixing 😋
Imma take a guess before watching. ITS A FORD.......😂😂😂
Han
Unbalanced compression sound
WOT! No bonus footage,, I'm gonna unsubscribe lol!
noooo lol
@@PineHollowAutoDiagnostics Go on then I'll forgive you this once, seeing on your reccomendation I bought the Teslong 500. It's awesome! Thanks Had to use UK Amazon as yours wanted more than the camera for shipping