A few Panasonic cordless power tools and a Bosch hammer in for repair today.
HTML-код
- Опубликовано: 8 сен 2024
- It's not often I get Panasonic tools in for repair, but today there were 3 to look at.
Panasonic normaly make quite good quality tools but I must say I was disappointed with the quality of the multi tool. But that's not to say it isn't a good performing tool.
I was hoping to make a full video on all the tools today, but there were simply too many for one video. And the repairs video length where to long.
But I will try again with shorter format videos another time.
#tools #repairs #bunchoftools #powertools #toolrepair #panisonictools #boschhammer #boschtools
The wealth of knowledge that is passed along in these videos is awesome. You and AvE are the only guys doing this on RUclips (that I can find, anyway). Great stuff as always, Dean.
Doctor Lefthanded
@@EndoliteM4trix Thanks for the recommendation! I'll be sure to check him out.
😂😂😂😂😂😂
There’s also The Post Apocalyptic Inventor. He does scrapyard repair-o-thons which are quite good.
I’ll also check out Dr Left Handed. Cheers!
@@tomalcolm Thanks for the recommendation, Tom. This stuff is always helpful as a hobbyist woodworker. People often sell or give away old equipment that would otherwise cost thousands brand new.
My mate runs Panasonic as a kitchen fitter. I got to use them and was impressed with the quality. Lighter than my makita and as powerful if not more so. Like some have said here I’ve never seen them for sale.
Wow! Your an Ace!!
I speak for many contractors in my area when I say I wish you lived up here in northeast new England! We are hard on tools and need you like a dead man needs a coffin.
Keep up the good work
Wow what a comment 😮🤔
@@georgedavall9449
Ya we don't have any good power tool repair guys over this way. Only $100 an hour glorified parts changers. Big difference between a parts changer like we have and a real technician such as Dean
Had set of drills for over 10 years, absolutely solid tools.
Just as soothing as listening to a bob ross painting video.😎👍
"Half a hen's ear too wide!" - lol! 🤣
Used to have a few panasonic screw guns back about 20years the were the best eventually the batterys gave up but the drills still worked couldn't get battery or cheaper to buy a new one,👋👍
No idea bout complains on mic. All good. Great stuff as always Dean!
I'm using that Panasonic EY74A1 for 10 years now, never broke a sweat! I never knew it is actually still brushed! And i'm really glad it seems to be the real deal as fas as quality goes. I also have an angle grinder and a jigsaw, all are fine! And it's really an eye opener as far as Milwaukee goes! I recently bought a bladesaw and impact gun from them. And straight out of the box the batteries had like 5mm of play on the tools!! I bought them because of their garage reviews and their power. Now it turns out they just programmed it to drain the battery more! Such a shame! I will be sticking with panasonic if I ever buy something new and just forget the torque reviews!
That thing sounds like its about to take off.
Great video !!! thanks
Ha, that clip on the switch cover made me laugh. What you mean is : I broke the clips off this the first time I tried it.. don't do the same.
Hello everyone....... you share how to repair screwdrivers and magnetic drills. Repair control boards❤❤❤
Uncle Bumblefucks healing bench is a little different, his tools come in new, leave broken
Perfect 👌
I don't think I've ever seen a Panasonic cordless tool on sale anywhere, but they look quite robust.
WHERE DID THAT CLIP GO DEAN
I Had A Black & Decker Drill. &
It Wasn't Running Too Good & When I Took It Apart I Could See Why It Didn't Run Right. There
Was Hardley Any Grease In The Gears.
Cadê a furadeira de impacto de 220v ou 110v dessa marca
👍👍
I just know this channel and I already subscribed, amazing content. Just try to use an external mic, I hear the tools much louder than you.
Thanks for the tip!
Do you recommend a gsh11? Or just buy something new?
If you want hammer only, no rotary. The bosch gsh11e is top dog. You will not get the same amount of work and money out of any other hammer
I love my boschs burned out two of them in my career I get to the point with him where they’re just not worth putting any money in might as well just replace the unit because it just gets so worn out from being a plumber, digging trenches and all kinds of stuff
When you went to buy a TV and a microwave, but also got set of powertools.
Dean, I have a makita impact driver which won’t hold the bit inside the collet Chuck bit holder. Any ideas mate as the drill is practically brand new and the parts look fine?
Make sure nothing like a piece of paper is stuck inside. Other wise it will be a new sleeve
У отбойника совсем всё печально с подшипником со стороны редуктора.
Problem with the audio mate
Sorted now!
I regret not turning my volume down with ear buds in 😢
Sorry
Not your fault. That buzz saw got loud quick 🤣
Can people send you things from the UK to repair?
Cant hear you deano
fix your microphone so your voice is audible. all you do is mumble