Get a new soldering iron tip. Get a few sizes too. Then get some tip tinner to prep the new tips. You will find your solding will improve with the correct equipment
Joel , i just pick up a used Japanese slot machine. I fixed a few issues on this slot machine. The last issue is the wheels didn’t not stop by hitting the buttons. I checked exactly what you did. My fuse was blown and the capacitor C10 was bad too. I ordered the 1uf 50v capacitors and fuses from Amazon. Thank you for the help. You saved me a lot of money.
I had the same issue on my Diver type a machine. The inside looked identical to your machine, so I checked the capacitor and it was blown. You save me a ton of headache, thanks a lot man!
I have the Taco Slot(octopus) just got it from a friend for $100. Got it all to work but the stop buttons. They light up but do nothing. I saw the fuse blown on the stop board. Im hoping with your fix i might can get mine to work.
I replace C10 capacitor in my super bunny slot machine. Stop buttons all worked for a little while now to work but one does it what could be the problem?.
GREAT DEAL!!! I just bought one blind from an online goodwill. All they did was plug it in, they noted nothing else it has both keys. Any ideas on a value of a juggler girl kitac???
It will have two prongs that connect to the circuit board. If they're not labeled, the longer prong is the positive and the shorter prong is the negative.
I have a delsol slot machine ,buttons light up but when pressed it does not stop the reels from spinning. Any help will be appreciated and I have replaced the stop board but no luck
Here's a user made manual: drive.google.com/file/d/1yjYoiVnCy31zUjwMf_vuu768gj83gnRk I would look for guides/videos on replacing the reel entirely or replacing surrounding parts since this will likely involve removing them entirely. If you plan on painting them, make sure you use a light touch. If one customized icon weighs significantly more than the others, it could set off the anti tilt features because the machine will detect an imbalance and think you're cheating by "weighing it" towards the jackpot. Lastly, you should make my face the jackpot! Good luck
Yooooooooooo, I love you. I’m not in love with you but I do love your soul. My machine had the same exact problem and I got my tester out and compared and sure enough I just had to replace that same cap. You’re a beautiful soul for taking the time to film the steps. I’m dealing with the speaker buzzing now if you have any tips (it’s grounded)
I'm also having a reel spinning issue. Stop buttons doing nothing. You order some capacitors but I don't know what the numbers mean on the capacitors or what/where to order.. Please advise..
Could you tell me where you got the capacitor from because I had the same problem and I just checked but I can’t even see the damn thing, really bad eyes regardless of how I try to look at it. If you could let me know what capacitor it is I would really appreciate it and way to get it
Get a new soldering iron tip. Get a few sizes too.
Then get some tip tinner to prep the new tips.
You will find your solding will improve with the correct equipment
Just picked up dang near the same machine with the same exact problem. Hope you saved me a tone of time troubleshooting thanks
Joel , i just pick up a used Japanese slot machine. I fixed a few issues on this slot machine. The last issue is the wheels didn’t not stop by hitting the buttons.
I checked exactly what you did. My fuse was blown and the capacitor C10 was bad too.
I ordered the 1uf 50v capacitors and fuses from Amazon.
Thank you for the help. You saved me a lot of money.
I had the same issue on my Diver type a machine. The inside looked identical to your machine, so I checked the capacitor and it was blown. You save me a ton of headache, thanks a lot man!
Great job. I have a Japanese slot machine with the same issue. I will have to check that capacitor on that board now. Thanks for the help.
I have the Taco Slot(octopus) just got it from a friend for $100. Got it all to work but the stop buttons. They light up but do nothing. I saw the fuse blown on the stop board. Im hoping with your fix i might can get mine to work.
What was the issue with ur machine
@@frankcabrera6319 I replaced that resistor and it worked!!
I replace C10 capacitor in my super bunny slot machine.
Stop buttons all worked for a little while now to work but one does it what could be the problem?.
I got pretty much similar machine and same problem. I just wanna say good work and thank you a lot save me a lot of time.
i have a pachislot i need to repalce the electrolytic cap and the red ceramic caps but i hve some othe stuff i need ot deal with on it as well
GREAT DEAL!!! I just bought one blind from an online goodwill. All they did was plug it in, they noted nothing else it has both keys. Any ideas on a value of a juggler girl kitac???
Super bunny slot machine do you think I could have the same.. my capacitor could be bad my push buttons don't work
What did you do to fix sound. I have same machine but different title.
Where did you find the capacitor and fuses?
Amazon. Search for "1uf 50v radial dipped capacitor"
@@JoelRyanQuinnthank you sir God bless you
I will get some right away
I just got the capacitors in today. Will reap be replacing the one that reads zero zero
It will have two prongs that connect to the circuit board. If they're not labeled, the longer prong is the positive and the shorter prong is the negative.
@@JoelRyanQuinn replaced C10 capacitor...
Stop buttons work great thank you..
I have a delsol slot machine ,buttons light up but when pressed it does not stop the reels from spinning. Any help will be appreciated and I have replaced the stop board but no luck
Joel…can you make a video to change the pics on the reel? I’m looking to custom mine. Thanks 🙏🏽
Here's a user made manual: drive.google.com/file/d/1yjYoiVnCy31zUjwMf_vuu768gj83gnRk I would look for guides/videos on replacing the reel entirely or replacing surrounding parts since this will likely involve removing them entirely. If you plan on painting them, make sure you use a light touch. If one customized icon weighs significantly more than the others, it could set off the anti tilt features because the machine will detect an imbalance and think you're cheating by "weighing it" towards the jackpot. Lastly, you should make my face the jackpot! Good luck
Yooooooooooo, I love you. I’m not in love with you but I do love your soul. My machine had the same exact problem and I got my tester out and compared and sure enough I just had to replace that same cap.
You’re a beautiful soul for taking the time to film the steps. I’m dealing with the speaker buzzing now if you have any tips (it’s grounded)
I have same problem what capacitor do I need to order
I have a yamasa king pulsar machine. It lights up but nothing else. Any ideas?
Start replacing fuses if they're blown. Here's a user made manual: drive.google.com/file/d/1yjYoiVnCy31zUjwMf_vuu768gj83gnRk
Good luck!
@@JoelRyanQuinn thank you so much
Thanks a ton,I'm having the same issue.you Rock bro
I'm also having a reel spinning issue. Stop buttons doing nothing. You order some capacitors but I don't know what the numbers mean on the capacitors or what/where to order.. Please advise..
Search on Amazon for "1uf 50v radial dipped capacitor"
Did you ever get your sound to work?
Where can i buy the c10 capacitor?
Amazon, where else? Search for Capacitor is a 1uf 50v radial dipped capacitor
Could you tell me where you got the capacitor from because I had the same problem and I just checked but I can’t even see the damn thing, really bad eyes regardless of how I try to look at it. If you could let me know what capacitor it is I would really appreciate it and way to get it
How do I get my key to turn its stuck in the off
What size is that c 10 capacitor??
Capacitor is a 1uf 50v radial dipped capacitor
That so good to see it working again, now you just have to get it to use real money, so you can paly & save up money at the same time.
Are you available to help me on my machine?
Good catch
I can’t get my key to turn
You are using the wrong kind of solder. Any Autozone sells the ones thing kind you need.good video.
I have some I'll send you it simple it's rosencore solder
I need to see a CHERRY MASTER 96 POKER MACHINE FIX BUTTONS WONT WORK
Can u call me please I need to know where is the sound I need to lower it
Here is the manual: drive.google.com/file/d/1yjYoiVnCy31zUjwMf_vuu768gj83gnRk/view?usp=drivesdk
get yourself a decent soldering iron and good solder will you!