FoxAlien XE-PRO CNC Router Assembly & Setup Guide
HTML-код
- Опубликовано: 18 сен 2024
- In today's video, we're diving into the assembly of the FoxAlien XE-PRO CNC router.
More info: bit.ly/foxalie...
Amazon: amzn.to/3To6dX8
With a spacious working area of 400 x 400mm and advanced features like integrated closed-loop stepper motors and precise ballscrews, this machine is a versatile tool for any workshop.
Follow along as we walk you through each step of the assembly process, from setting up the base frame to mounting the gantry and installing the Z-axis assembly. We'll provide clear instructions and helpful tips to ensure a smooth setup.
Once assembled, we'll tackle the wiring and power up the machine for testing. From homing the axes to checking the spindle functionality, we'll cover everything you need to know to get started.
Finally, we'll run a test job using one of the preloaded G-code files included on the microSD card. Learn how to set the Z-axis zero point and run your first project with confidence.
Stay tuned for practical guidance and expert tips on getting the most out of your FoxAlien XE-PRO CNC router. Don't forget to subscribe for more helpful content!
In today's video, we're diving into the assembly of the FoxAlien XE-PRO CNC router.
More info: bit.ly/foxalienxepro
Amazon: amzn.to/3To6dX8
I have an important question for anyone that has maybe had the same problem I have on the FoxAlien XE Pro and possible fix??? Sometimes when I am switching back & forth on the controller screen the screen goes BLANK - turns white with no text on it. I have to switch between PC & controller to bring the screen back up I know it's not isolated to just my machine because I have had 2 of these units thinking the first one was defective, I had it replaced and the 2nd one is doing it to.................... :-( is there a firmware update for this or am I just doing something to cause it which is unlikely, all I am doing is moving back and forth on the screens when it does it, very frustrating ???
I have had mine for a couple months now and its been great. Now, all of a sudden the Y motor has decided its going to go in the wrong direction! Any ideas why it would suddenly decide to change its mind? I have made no changes to the machine in the time I have had it, but today it changed its mind... very frustrating!
If only one stepper motor is moving in the wrong direction, it is probably faulty and needs to be replaced. Also check the wiring and that the plugs are properly seated.
If both stepper motors are moving in the wrong direction, you can fix that by changing the $3-Direction port invert mask setting.
github.com/gnea/grbl/blob/master/doc/markdown/settings.md#3--direction-port-invert-mask
Using the controller to set the thickness of the probe (at 08:34) it seems possible to modify it with steps of 1 mm only !! That seems very strange, could you please confirm ?
Yes that seems to be the case.
@@techydiyreviews Thanks
do you know if the black box cables have enough reach to be put underneath cnc machine?
Long enough that you could put the machine on a table and the control box on a shelf underneath it.
@@techydiyreviews thanks that really helps me out!! now trying to decide between this and Genmitsui 4030 v2!