Thanks for the video man I’m at the shop working on one right now and I did not want to take out the transfer case. Everybody keep telling me to turn the job away but I like the challenge 😂😂😂.
@@ahmadsalim8752 Man so I did it and in the process the starter pig tail got broken 😡 now I can’t put the car back together until Saturday when the new pig tail shows up. The little red tab broke off. The red tab is the part that holds the clip down.
@@ahmadsalim8752 I pulled back on the clip and the tip part of it broke off so I used a small flat head to push the rest of it out from the other side. Installed the new starter when I went to plug it back in it would not hold then I saw there was another piece of plastic that fell out. My store manager at Pepboys ordered the pig tail autozone say it will come in on Saturday. So now the car is stuck there until Saturday. It’s ok tho I have plenty of other diagnostic’s I did that are waiting on parts to come in and new cars come in every day so I have work.
Need to know do you have to remove the multiair actuator and heads to replace I'm the shops system for repair procedures had a shop break that and in take valve cause they didn't use the proper tool please if you can respond
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
Awesome video bro, I appreciate your skill and know how, this really helped me out a lot...
Thanks for the video man I’m at the shop working on one right now and I did not want to take out the transfer case.
Everybody keep telling me to turn the job away but I like the challenge 😂😂😂.
It’s really easy I like challenge too and I don’t tune no money down get that bread 🍞😂
@@ahmadsalim8752 Man so I did it and in the process the starter pig tail got broken 😡 now I can’t put the car back together until Saturday when the new pig tail shows up.
The little red tab broke off.
The red tab is the part that holds the clip down.
@@atmphil1 sorry to hear that .. how did it happened?
@@ahmadsalim8752 I pulled back on the clip and the tip part of it broke off so I used a small flat head to push the rest of it out from the other side.
Installed the new starter when I went to plug it back in it would not hold then I saw there was another piece of plastic that fell out.
My store manager at Pepboys ordered the pig tail autozone say it will come in on Saturday.
So now the car is stuck there until Saturday.
It’s ok tho I have plenty of other diagnostic’s I did that are waiting on parts to come in and new cars come in every day so I have work.
Is it the same process if it’s two wheel drive 2018
Need to know do you have to remove the multiair actuator and heads to replace I'm the shops system for repair procedures had a shop break that and in take valve cause they didn't use the proper tool please if you can respond
Great video thank you
The best way is by removing the battery and battery shield and then you can access to the 2 stater bolts on the side
I didn’t need to , It all depends on the tools your working with
Witch motor mount did you unbolt ? Passenger and driver?
Just the passenger top mount
Life saver 🫶🫶🫶
Welcome