@@AaronFernandes__ I do it professionally. And it doesn't look fantastic. They didn't even put a tape Iine at the door, the "partial broadcast" look is terrible. You need to throw the flakes until rejection. The prep on the floor was horrible, and they didn't even use a primer before the flake coating. I assume this floor will peel up I'm 2-3 years or even less. Those home depot kits are also hot garbage. Should always hire real professionals.
I don't. Jose and Juan Robbin you blind, they probably immigrated here illegally and cut in front of the line impregnated your sister, your mom, your grandma, auntie, mybe evnn the uncle, the whole neighborhood then played the role well amd is now spreading his teachings while their bastard children go hungry at the house. Ya good job bro. MAGA 2024
@@tannersharp643 advocacy for the care of Mexican Americans by their employers, illegal or not; laborers and journeymen who do the skilled work of three men at times….If that is racism, hang me from the nearest tree.
@@louisderosa6154 exactly how that goes some guy fires the talent and hires all his college buddies that don’t know anything about good work or what it looks like
As a former professional at doing epoxy floors... its really a job that you will want at least a two or three man crew that does this all the time to do your floor. It's more than what people think it is. I have had to cleanup bad mixes and sloppy jobs done by people all the time and it's awful. Always get a professional to do something like this. Unless you are experienced enough to know what you're getting into
@@manuelve1998 lol no they only learn the hard way. A dude I knew had a badass Juan that pretty much ran his concrete business, he asked for a raise to $21 an hour and was told no. He fucked off and worked for someone else as a finisher for $40 an hour. People deserve to be paid for their skill set
I did this myself on my garage floor. I love it, it came out really good. I however, will never do it again! Once you open up the bag of epoxy, you have about 10-15 minutes before it starts turning into putty and you can’t roll or brush it anymore. It’s better to have at last 2 people doing it.
The previous video and this is a stellar example of DIY vs. leaning on professional experience. You should put the two together and it may go viral since it puts a lot things in context for people who start jobs with sincere intentions but end up ruining their home. GREAT content! 👍🏽
As a professional Epoxy installer i have to give this a D+ it looks okay however using the same material you put down before is just not a good idea. Home Depot “epoxy” is not good or long lasting epoxy in any way shape or form. It is a very cheap way to paint a floor though!
What do I think? I'll tell you what I know from personal experience: that Rust-Oleum garage epoxy is utter garbage. The top clear coat might help you some...but it will lift with hot tires on it, and it will fade in sun, and if you try to get a single gallon of the exact same color, it will not match the two gallon kit. After 10 years my garage floor looks like total crap, and it started looking bad after year 3. I'm going to put some porcelain tile over it all and be done with it.
The epoxy kits from Home Depot suck. The epoxy is a cheap alternative to the real stuff where you first need to aside wash and then etch the concrete before using the epoxy. The stuff you get from home improvement stores peal relatively quickly from the heat from the car tires.
You learned the internet is a rough place. Funny enough after I read some of the harsh comments on that other video I wondered if you would get it fixed and if you would post it.
How did you mess it up? It's a very simple process. What went wrong? I've done before with no issues but about to do it again on new house so I'm curious how it could get messed up
jose should put primer for moisture before rolling the epoxy. cheap insurance so you dont have to do it again. it saves you money and jose the time of coming back to do it again. then again idk where you are. happened to me thats why im saying it
When u add a clear coat/top coat doesn't it make it slippery when it dries? Or not really if u keep it to 1 medium coat since small rock flakes were added?
When that wears off, use Spartacotes Polyaspartic and get a big 40lb box of the flake and do a much heavier broadcast of the flake. Those diy kits are okay but they don’t last very long. I tear a handful of those down a year and redo them because they start to deteriorate after a few years. The Polyaspartic will last you 15-20 years. It costs a bit more but is worth it!!
@@brandocommando4459 I’ve done one epoxy flake floor for my old boss who had a remodeling/ construction company. Me and my buddy just cut his grass for him amongst other hard manual labor but he needed help one day and we did an entire 6 car garage (nice high end garage complex) and everytime I see people doing their own epoxy floor I cringe. We used acid, cleaned the floors like a dinner plate and poured more base layer than I ever thought necessary for any paint job. The floor came out IMMACULATE I’ve never felt so impressed by my own work just because of the pure beauty factor.
Looks better however the Home Depot stuff doesn’t last long also next time order a 40lb box of flakes from torginal so you can do a full broadcast. Not only will the flake look more even it’ll also make your floor much stronger adding a full layer of flakes. Broadcast until full rejection and the entire floor is covered then scrape the flakes in 3 directions after it’s ready to be scraped!!
FYI for anyone doing epoxy garage floors and throwing flakes. Stop throwing them and get a grass seed spreader. Hand held one and fill it then just walk and turn the handle. It gives you a better spread of flakes and doesn’t have clumped up spots by doing it that way.
still did it wrong brother and not even kidding. I made the same mistake my first time. But it still works. The pros dump a whole lot of clippings on top after painting then sweep out the excess when the floor is dry. Leaving every square inch of the floor covered in the pattern
I like how he tried to sell the first video as if he actually did a good job but then got roasted and had to re do it😂😂😂
I know I just saw the other video and everybody was flaming him 😂😂
Yea. And this one doesn't look that great either. Just a step better than the last one. Should have hired a real professional.
@@brandocommando4459 are you blind? It’s 1,000x better
@@AaronFernandes__ I do it professionally. And it doesn't look fantastic. They didn't even put a tape Iine at the door, the "partial broadcast" look is terrible. You need to throw the flakes until rejection. The prep on the floor was horrible, and they didn't even use a primer before the flake coating. I assume this floor will peel up I'm 2-3 years or even less. Those home depot kits are also hot garbage. Should always hire real professionals.
@@brandocommando4459 lol aye couple hundred every 3 years vs 5k now ain't bad savings
I love when Jose and Juan come save the day
I don't. Jose and Juan Robbin you blind, they probably immigrated here illegally and cut in front of the line impregnated your sister, your mom, your grandma, auntie, mybe evnn the uncle, the whole neighborhood then played the role well amd is now spreading his teachings while their bastard children go hungry at the house. Ya good job bro.
MAGA 2024
New York isn’t loving it so much right now.
@@awesomedave8484 New York can burn in hell
I currently own a Pedro and a Paco... Best money I've ever spent.
That’s not cool talking about Latino people like that like we were some kind of slaves
You better pay good ,to my Amigo José ,,,😁
The flakes hide small imperfections but they also hide all the small parts you may drop on the floor working on projects!
Set a flashlight on the floor and look for the shadow
@@PayNoTaxes0GetNoVotevery Smart
Not to mention epoxy will hide actual cracks in the slab, you're blind if you have issues that need addressing later
Hope u take care of “your Jose” better than most American construction businesses do
American construction where only the foreman’s and supers friends are working and theirs no work for actual talented tradesman.
why cause hes mexican? so hes illegal? u might be racist
@@tannersharp643 advocacy for the care of Mexican Americans by their employers, illegal or not; laborers and journeymen who do the skilled work of three men at times….If that is racism, hang me from the nearest tree.
@@louisderosa6154 exactly how that goes some guy fires the talent and hires all his college buddies that don’t know anything about good work or what it looks like
HA!
(👉🏾👍🏾)
That’s way better brother good shit I think it was still a good learning experience
Yes absolutely!!
… those kits are literally notorious for being dogshit. You couldn’t just talk to a local pro and get some real epoxy?
JOSE! Is a must have, great job.
As a former professional at doing epoxy floors... its really a job that you will want at least a two or three man crew that does this all the time to do your floor. It's more than what people think it is.
I have had to cleanup bad mixes and sloppy jobs done by people all the time and it's awful. Always get a professional to do something like this. Unless you are experienced enough to know what you're getting into
This is easy people just never put an even coat
If your gonna do it. Get the 5 gallon buckets of professional product. The lil cans from hd are sick. Check Sherman Williams
Any profession will say that
At the end of the day you want to make money. Of course you'd say that
If that's the Home Depot kit better let you tires cool for 30 before parking on it!
For 30? That’s a great way to not be concise at all lol. 30 seconds? Minutes? Hours? Days?
@@PMTcommenterRight
😮 we are in suspense now
Im guessing 30 minutes???
Who knows, Anyone?? 😂
Does not matter how long you let it cool those kits are terrible they will peel should of spent some money and got it done once with good products
I had a Juan, a Jose, and a Pedro put a new roof on my house in the middle of a heat wave. They were great.
They still up there?
I dont have a José, I have a balam and if he doesn't show up to work, i don't know what to do anymore. He works like crazy and does an amazing job.
And you then found good benefits and a high wage for him right?
@@manuelve1998 lol no they only learn the hard way. A dude I knew had a badass Juan that pretty much ran his concrete business, he asked for a raise to $21 an hour and was told no. He fucked off and worked for someone else as a finisher for $40 an hour. People deserve to be paid for their skill set
@@TheKing-nu4fkAmen
Great 😊 But Give Jose’s Information So He Can Make A Few Dollars 💸 LOL 😂❤
I did this myself on my garage floor. I love it, it came out really good. I however, will never do it again! Once you open up the bag of epoxy, you have about 10-15 minutes before it starts turning into putty and you can’t roll or brush it anymore. It’s better to have at last 2 people doing it.
How’s it holding up?
@@VictorDao12 It’s only been about 2 years and I did it on a brand new concrete floor. So far, it looks great.
I wish we had an update on this. I'm willing to bet it's starting to peel by now
Buy extra flakes before you coat so you don’t run out sprinkling the ones that came in the kit
No good,.You have to use Polyurea Basecoat or Polyaspartic Basecoat.
You need a Jose in your life hahahaha so true love it. Hard working people !
Just make sure they are legal lol
Hit the steps on the sides with some gray paint too
It’s pressure treated wood, gotta wait a little bit
@@NikosPropertyShow what are those flakes
Awesome! good move painting the baseboard!
Shout out to Jose....♥️😎
That looks great!
Thanks Bryan!!
Don’t forget Luis. He’s just as badass
The previous video and this is a stellar example of DIY vs. leaning on professional experience. You should put the two together and it may go viral since it puts a lot things in context for people who start jobs with sincere intentions but end up ruining their home. GREAT content! 👍🏽
Not a bad idea!! Thanks for the positive feedback!!
Appreciate your Jose', mine died! Rest brother! You earned it!!😢
This came out awesome 💪💪💪! What I like about you is that you don't mind saying you did something wrong 😂😂
As a professional Epoxy installer i have to give this a D+ it looks okay however using the same material you put down before is just not a good idea. Home Depot “epoxy” is not good or long lasting epoxy in any way shape or form. It is a very cheap way to paint a floor though!
I like how you said DIY then record someone doing it for you 😀
dude hit a mean griddy when showing off the final product
Not gonna lie. It came out a hundred times better. Some people will flame Jose, but the new epoxy looks fine as fuck just do NOT destroy it
What do I think? I'll tell you what I know from personal experience: that Rust-Oleum garage epoxy is utter garbage. The top clear coat might help you some...but it will lift with hot tires on it, and it will fade in sun, and if you try to get a single gallon of the exact same color, it will not match the two gallon kit. After 10 years my garage floor looks like total crap, and it started looking bad after year 3. I'm going to put some porcelain tile over it all and be done with it.
I never understood the sprinkles, it looks so much better without it
Well he did the flakes Great not over doing it like some people.
Talking as a Jose myself you should have had your Jose and Morales do it the tirst time.
Get them a 24 of Modelo next time.
The epoxy kits from Home Depot suck. The epoxy is a cheap alternative to the real stuff where you first need to aside wash and then etch the concrete before using the epoxy. The stuff you get from home improvement stores peal relatively quickly from the heat from the car tires.
Get commercial grade epoxy. It might cost a 1000 bucks. It is a home floor, so it will last forever.
Agree 100%!
What kind of clear coat did you use for second coat?
You learned the internet is a rough place. Funny enough after I read some of the harsh comments on that other video I wondered if you would get it fixed and if you would post it.
Yes Jose is great don't forget Jose b
It will peel. Those DIY kits always do.
That actually looks great. Not like the last one… that was horrible
looks amazing so how long did it take you to dry your floor?
How did you mess it up? It's a very simple process. What went wrong? I've done before with no issues but about to do it again on new house so I'm curious how it could get messed up
Home Depot Basecoat and topcoat get Yellowing After a Few month . And come off some areas
Water Base Topcoat Won't Yellow
I don't have a hose a, I only got a hose b 🤣
You think I could find a Jose at Home Depot? What aisle are they at? Lmao
So he DIY his garage and hires juan and Jose to finish the job .......and at the end show us how professional Joseph and Joe are...
jose should put primer for moisture before rolling the epoxy. cheap insurance so you dont have to do it again. it saves you money and jose the time of coming back to do it again. then again idk where you are. happened to me thats why im saying it
My son did my garage for fathers day.Beautiful.
Just proves its not cheaper to DIY everything
He just did a shit job the first time
@@gauge_silvers exactly my point
Lol what I got out of this was. Homeowner I tried. I messed up. An Mexicans saved the day.
Fact!!
Bruh, Juan and Gomez combo 🔥 too, you know your upgrade is going to be 🔥 😎
What machine are you using for removing the epoxy at the beginning???
Love it man good to see part 3
When u add a clear coat/top coat doesn't it make it slippery when it dries? Or not really if u keep it to 1 medium coat since small rock flakes were added?
Seee😂if u don't have Jose in you life go get one😂😂,but take me😂😂
My friend which product did you put at the end of the video? Is a sealant?
When that wears off, use Spartacotes Polyaspartic and get a big 40lb box of the flake and do a much heavier broadcast of the flake. Those diy kits are okay but they don’t last very long. I tear a handful of those down a year and redo them because they start to deteriorate after a few years. The Polyaspartic will last you 15-20 years. It costs a bit more but is worth it!!
I just use 100% epoxy until the final coating with a polyurethane. Big box stores material are garbage.
@@brandocommando4459 I’ve done one epoxy flake floor for my old boss who had a remodeling/ construction company. Me and my buddy just cut his grass for him amongst other hard manual labor but he needed help one day and we did an entire 6 car garage (nice high end garage complex) and everytime I see people doing their own epoxy floor I cringe. We used acid, cleaned the floors like a dinner plate and poured more base layer than I ever thought necessary for any paint job. The floor came out IMMACULATE I’ve never felt so impressed by my own work just because of the pure beauty factor.
You get the Jose from the dippo too? 🤣
He said go find yourself a Jose lmao
There needs to be a Jose Christmas party
What did u use for the top coat?
Love it just the way I Want it👍👍
There are lot of Joses in the border with Mexico.
I like how he keeps saying “we” while he’s standing there doing squat
I don't have a jose right now. i only have Ramon 🤔🤔🤔🤔
Amazing work!
Juan way or another while at home depot just pick up a jose while you're there😂
Its really cool to try to find some nut or washer in that ghillisuit floor.
Looks better however the Home Depot stuff doesn’t last long also next time order a 40lb box of flakes from torginal so you can do a full broadcast. Not only will the flake look more even it’ll also make your floor much stronger adding a full layer of flakes. Broadcast until full rejection and the entire floor is covered then scrape the flakes in 3 directions after it’s ready to be scraped!!
Garage tiles is the way to go. First time you raise a vehicle on that epoxy its gonna stick to the steel wheels on the jack
Its going to flake and peel after a year or 2. Def should get professionally done. Saves so many headaches, warranty, go pro. You wont regret it
Hello
Where can I buy the blades for the buffer?
Every near by Home Depot has at least 1 Jose in the parking lot section.. all you gotta do is PAY!
Please put a listing for your José
Looks great until you pull in with really hot tires
Absolutely amazing im happy you made it this far, dont give up
Jose and Juan are waiting at Home Depot parking lots nationwide
I hate floors like this. If you drop a screw it’s now a game of I spy
Jose b does a bang up job too
Jose is a good guy
But having seen these flakes in school for 10 years I absolutely hate them.
Jose and Juan’s are good to have lol 😂 very hard workers.
Nothing better than having a Jose in your life
I love it. We need a José in our lives.
Jose . And hose B. They fix everything
What is a 2 1/2 car garage? Is it wider or longer than a 2 car garage?
Most men don’t understand women’s struggles with safety.
Whats the top coat that you used?
Where you get the tool
Clean job, and good work. Homies got down!
FYI for anyone doing epoxy garage floors and throwing flakes. Stop throwing them and get a grass seed spreader. Hand held one and fill it then just walk and turn the handle. It gives you a better spread of flakes and doesn’t have clumped up spots by doing it that way.
Or you can throw them up in the air and let them fall onto the floor. They spread better that way too.
Not if you know what you're doing😏
Nah man 💀💀💀💀💀
you have better have paid Jose what he is owed!
I did that myself. Not hard at all.
Moral of the story: don't start DIY projects without José 😅
That kit will fail too . I’ve seen it way to many times .. hot tire pick up in 3..2…1 .. you can’t find a legit epoxy system at a big box store
It looks better with the flakes
Let’s make sure we understand that the 2 car epoxy is like some cheap fake epoxy you want to get the real stuff
still did it wrong brother and not even kidding. I made the same mistake my first time. But it still works. The pros dump a whole lot of clippings on top after painting then sweep out the excess when the floor is dry. Leaving every square inch of the floor covered in the pattern
I did the same kit in my garage. I love it!
The most expensive project is one you do twice. Call a pro the first time
Did you find your Jose at Home Depot as well? I hear it's their natural habitat...
How much did it cost I'm looking into doing this to my garage