Good video 👍 What’s that you use mate for cleaning the hot water heat exchanger / you got lucky on the driver nice 👏 it doesn’t always work as you prob know last time I had a Doutec plate 15 years old had to drill out one of the plate screws as wasn’t as lucky 🙈
Great vid! I had the same situation Monday on an old Vaillant trying to take plate out. I was hitting the screw for about 30 minutes but I did not succeed. I ended up driving to Screwfix and purchased a screw extraction tool. I was surprised I got it out in 1 minute.
Good video mate, That worcester boiler was in a bad way I’d say it would be cheaper to replace it, It’s watching you with that cain analyser, an Anton would look better in your hand, 😂😂, Them wireless flow return clamps look very good What is a good brand with the spirit of salts and does it actually work or are you better to replace the plate Sound was perfect It won’t be long before you hit 5K subscribers 👍👍🤜
Thanks for the feedback mate! Ah the outcome of the Worcester will be on the next video 😉 Yeah the Testo 115i are quality to show customers exactly what's going on 👌🏽 All spirit of salts are the same as far as I know and yes I've not had a situation it hasn't worked...yet! The sound improves on the next video even more as I made a few more tweaks to the settings and I think I've got it spot on now 🤞🏽
If it was my customer I’d talk them into replacing it, But I’d love to an overhaul job done on it, Thanks for the info of the clamps & Salts Brilliant videos mate, 👍👍🤜
Vessel on that turbo max is flat as a pancake, if not split, should alwsys charge them before drain down to stop that glugging and be sure it’s completely empty 👌
Quick question. Y plan. Heating goes off at random times, can only run hot water at same time as heating. Run the heating and turn down the cylinder stat the heating switches off....
why repair a 10 year old bosh with a list a MILE LONG not worth the cost IMO new boiler is best advice for customer seen it befor where customer spent £700+ ON REPAIR FOR BOILER TO LAST A YEAR then give up the ghost again at that age id always advise new boiler grass it and put a decent boiler in Baxi or Vaillant viessmann
@@cputilitysolutions ah cool, I've just singed up today to do a 6 months intensive course for my ACS. Your videos are really helping. Although they don't lose me a lot with my minimal knowledge 😉
Thank you all for watching. If you enjoyed today's video I'd really appreciate if you could SUBSCRIBE and hit the LIKE button 🙏🏽 more to come!
Best 👌 as always much appreciate
Your all videos are great mate
Thank you!
Full marks for perseverance!
Thank you!
Good video. Thanks, uncle
Thanks man 👍🏽
6.06min. I always use a mini quick grip on those banjords to make sure it’s fully in. Great video as always
Nice one man 👊🏽
Good video 👍
What’s that you use mate for cleaning the hot water heat exchanger / you got lucky on the driver nice 👏 it doesn’t always work as you prob know last time I had a Doutec plate 15 years old had to drill out one of the plate screws as wasn’t as lucky 🙈
Cheers mate. That's spirit of salts to clean out the plate. Tell me about it I was hoping I wouldn't have to drill it out!
Great vid!
I had the same situation Monday on an old Vaillant trying to take plate out. I was hitting the screw for about 30 minutes but I did not succeed. I ended up driving to Screwfix and purchased a screw extraction tool. I was surprised I got it out in 1 minute.
Oh nice one! I've never had those screw extraction bits work for me 😞
This is the screw extraction tool I used purchased from Screwfix if it helps.
TREND GRABIT DAMAGED SCREW & BOLT REMOVER SET 2 PIECES (836PV)
@@gasmark340 awesome thanks for that man!
Well done with that mate.
Cheers mate 👍🏽
Really good video pal 👍🏻
Cheers man
Sounds quality is tip top ❤
👍🏽👊🏽
Good one. Haha, the Krypton Factor, that's going back a few years. Surprising how often you need a big hammer.
Haha tell me about it!
mic sounds great
Thanks man 👍🏽
Sounded fine to me before 👌
👍🏾
I use nappies to catch residual water .. another good vid bro 👌
Not a bad idea 😅
Cut the elastic, works well
Haha so many plates so much sludge 😂
Keeps me busy eh!
Good video mate,
That worcester boiler was in a bad way I’d say it would be cheaper to replace it,
It’s watching you with that cain analyser, an Anton would look better in your hand, 😂😂,
Them wireless flow return clamps look very good
What is a good brand with the spirit of salts and does it actually work or are you better to replace the plate
Sound was perfect
It won’t be long before you hit 5K subscribers
👍👍🤜
Thanks for the feedback mate! Ah the outcome of the Worcester will be on the next video 😉
Yeah the Testo 115i are quality to show customers exactly what's going on 👌🏽
All spirit of salts are the same as far as I know and yes I've not had a situation it hasn't worked...yet!
The sound improves on the next video even more as I made a few more tweaks to the settings and I think I've got it spot on now 🤞🏽
If it was my customer I’d talk them into replacing it,
But I’d love to an overhaul job done on it,
Thanks for the info of the clamps & Salts
Brilliant videos mate,
👍👍🤜
@@tonymurff5234 thanks man, more to come! 👍🏽
Mate what sprit of salt do you use good job 👊🏼
Thanks mate, all brands will be the same, I think I've got either Kilrock or Knock Out
Top man
👍🏽
Vessel on that turbo max is flat as a pancake, if not split, should alwsys charge them before drain down to stop that glugging and be sure it’s completely empty 👌
Nice one 👍🏽
physics says: if hammer don't work use bigger hammer 😂😂😂😂😂😂😂😂
💯😂
Great work a lot would of called it a day with the screw 😂
Thanks man! Yeah it was touch and go!
What seat organiser do you have in the front of you van? Looks quality to keep service pads in etc
It's the Bott Smartvan one mate
Quick question.
Y plan.
Heating goes off at random times, can only run hot water at same time as heating.
Run the heating and turn down the cylinder stat the heating switches off....
Needs investigating into the wiring and the stats individually 🤔
Hi I want to become gas enginer do u think is good career and where can u do the private course from
Yes it's a good career if you have a genuine interest in it. You just need to find a local college and go and speak to them 👍🏽
@@cputilitysolutions Can u do private course like fast track courses
@@usamahali1042 you can but don't expect to learn much from those
why repair a 10 year old bosh with a list a MILE LONG not worth the cost IMO new boiler is best advice for customer seen it befor where customer spent £700+ ON REPAIR FOR BOILER TO LAST A YEAR then give up the ghost again at that age id always advise new boiler grass it and put a decent boiler in Baxi or Vaillant viessmann
Agree! I gave them both options and you'll see what they decided in the next video on Sunday 👍🏽
@@cputilitysolutions good stuff mate
@@cputilitysolutions subed and liked my dude good stuff with the baxi
@@aftermath3127 nice one man, appreciate it 👊🏽
👍
Cheers mate
🤘😎🤘
👊🏽
Hiw long have you been a heating engineer mate?
About 5yrs
@@cputilitysolutions ah cool, I've just singed up today to do a 6 months intensive course for my ACS. Your videos are really helping. Although they don't lose me a lot with my minimal knowledge 😉
@@cputilitysolutions
you've been really well taught, then!