Thank you very much for your kind words! It was one of my first videos, if you liked it then i strongly recommend to watch some of my other videos, like the making of Santa Ana and the making of San Juan Nepomuceno, you are going to love them, especially the music even though at the Santa Ana video is not in the total playing time.
@@JohnsWoodenShips I just subscribed. I have built just one wooden ship model so far. It is a Bluenose 2. Not as good as yours, but it came out good enough for my first one. These informative videos of yours are very helpful or beginners like me. Thank you.
@@jca245 The Bluenose 2 is a beautiful model to start with.Thank you very much for your kind words. If you'll need any help with your model ship building ,do not hesitate to ask me! :)
I'm glad that i was able to help! If you can afford it, buy a dremel too, it's very useful at the metal parts or when you are sanding the inside of a curve.
Just a little tip If you take cyanoacrylate glue and put baking soda on it. The glue will dry immediately and harden two to three times as much as it normally would.
1. Sandapaper 2. Wood cutter 2. Pin 4. Pencil, spring of various size 5. Big and small cutter 6. Small screwdriver with normal top 7. Small plane 8. Scalpel with various tips 9. Plier with smooth surface 10. Small aaw 11. Tweezers 12. Wire cutter 13. Brush for cleaning 14. Small metal axis 15. Small hammer 16. Needle 17. Power drill 18. drill tips from cobalt 19. Small bowl 20. PVG glue for wood, the quick dry type 21.Dremel
@@wikiprananda7965 From OcCre i have bought only the model Santisima Trinidad. Most of the tools are from a hardware store and some are from a modeling shop.
Thank you for this video! can you please tell more about the wood cutter? where I may get one? how do you use it? and one more question... do you varnish and polish parts separately before assembling? do you you steel wool as ArtesaniaLatina suggested or other method? thanks!
Hello! I bought the wood cutter from here : store.amatimodel.com/en/tools-and-equipment-parts-per-model/product-master-cut-strip-cutter-b7386.html To see how i use it just watch the videos that i have made. No ,never varnish before assembling the pieces, always after and i use nitro wood sealer as a primer.
I normal tip for soldering, just a little thick so i can have a big surface. Check out here around 5:00 minutes : ruclips.net/video/K6VN3pYKGdw/видео.html
All of your tools have become icons over the past year... Lol
Very nice presentation. I really enjoyed the music. Finally I can relax while watching a video on here without head banging music.
Thank you very much for your kind words! It was one of my first videos, if you liked it then i strongly recommend to watch some of my other videos, like the making of Santa Ana and the making of San Juan Nepomuceno, you are going to love them, especially the music even though at the Santa Ana video is not in the total playing time.
@@JohnsWoodenShips I just subscribed. I have built just one wooden ship model so far. It is a
Bluenose 2. Not as good as yours, but it came out good enough for my first one. These informative videos of yours are very helpful or beginners like me. Thank you.
@@jca245 The Bluenose 2 is a beautiful model to start with.Thank you very much for your kind words. If you'll need any help with your model ship building ,do not hesitate to ask me! :)
Thank you very much. Really helpful and well prepared. I liked that you showed some examples of usage where you seemed fit.
Thank you very much for your kind words!!! I am glad that you found it useful!!!
Found it....now I have a shopping list.
I'm glad that i was able to help! If you can afford it, buy a dremel too, it's very useful at the metal parts or when you are sanding the inside of a curve.
Beautiful classical piece too.
Thank you very much!
What a nice presentation.
Thank you very much!!!
Thank You...very helpful video...easy to follow and straight forward.
I am glad that you like it :)
Another good job John
Thank you very much Dave!!! :)
Just a little tip
If you take cyanoacrylate glue and put baking soda on it. The glue will dry immediately and harden two to three times as much as it normally would.
Thank you very much for the tip, i will try it first chance i get!!!
1. Sandapaper
2. Wood cutter
2. Pin
4. Pencil, spring of various size
5. Big and small cutter
6. Small screwdriver with normal top
7. Small plane
8. Scalpel with various tips
9. Plier with smooth surface
10. Small aaw
11. Tweezers
12. Wire cutter
13. Brush for cleaning
14. Small metal axis
15. Small hammer
16. Needle
17. Power drill
18. drill tips from cobalt
19. Small bowl
20. PVG glue for wood, the quick dry type
21.Dremel
You have to add a dremel :)
God job
Thank you very much, it was one of my first videos and i had no experience in making the video.
@@JohnsWoodenShips you bought the material from Occre?
@@wikiprananda7965 From OcCre i have bought only the model Santisima Trinidad. Most of the tools are from a hardware store and some are from a modeling shop.
@@JohnsWoodenShips how much one box of Santisima Trinidad?
@@wikiprananda7965 450 euros
Thank you for this video!
can you please tell more about the wood cutter?
where I may get one? how do you use it?
and one more question... do you varnish and polish parts separately before assembling? do you you steel wool as ArtesaniaLatina suggested or other method?
thanks!
Hello! I bought the wood cutter from here : store.amatimodel.com/en/tools-and-equipment-parts-per-model/product-master-cut-strip-cutter-b7386.html
To see how i use it just watch the videos that i have made.
No ,never varnish before assembling the pieces, always after and i use nitro wood sealer as a primer.
@@JohnsWoodenShips , thank you very much for the reply! (how) do you polish varnished ship ?
@@vk270575 No need to polish them, i use clear gloss varnish so the result is polished.
John, Thanks for publishing this series of videos. They will be very helpful for any beginner.
@@pauloakley2052 Thank you Paul!!!
What soldering iron attachment do you use to bend the wood? I’m having trouble finding one. Thanks!
I normal tip for soldering, just a little thick so i can have a big surface. Check out here around 5:00 minutes : ruclips.net/video/K6VN3pYKGdw/видео.html
By PVG glue do you mean PVA or PVC?
PVA glue, white glue for wood.
Total prize?
Depends on the local hardware store.
Καλησπέρα μάστορα. Τον κόφτη ξύλου που τον βρίσκουμε?
Καλημερα Κυριακο, τον εχω παρει απο την Amati : store.amatimodel.com/en/tools-and-equipment-parts-per-model/product-master-cut-strip-cutter-b7386.html
Does anybody else want one of those kit for model sailboats that actual sail anyone know we're I can get one?
I "watch," for the opportunity to "listen"! Be the truth known. Peter.
Now i got it :) Very clever indeed :)
I want a ship.
I want a ship for me to make 😞😭
Get some tools and start building one, it is very joyful!!!
Dość skromne wyposażenie. Na początek dla budowy modeli z zestawów wystarczy.
You are going to need more that a set to start building models.
Wwoooooowwwwwww
Please buying
What do you mean?
Unreadable subtitles. Please ex plane
In what part you need help?
Poor Russia...
Greece
lol russia?