Good video , probably pull like under 200 hp if you really tinker & play around with the tune , keep up the good work & videos stay blessed bro 💯 much love & positive vibes
@@YostBuilt yo I'm about to buy a 5 speed Accord with k24 a4 what would I need to swap into 97 civic LX thinking of getting a late 80s civic from junkyard maybe swap it into it if anything I'll swap in the d16y7 into 80s civic. Could I use the transmission I'll have in the Accord.
Much easier to find an A4, especially one mated to a manual transmission & in a car that isn't clapped out already. If you all motor a K24A4, you'll in essence have the equivalent of an all motor K24A2 minus the additional block drilling. Finally, you can always swap the heads... you need stronger piston heads & connecting rods for the 3 lobe system in an A4/A8, but if you're all motoring, you'd've already done that.
HC2 minimum comp weight for A4 is only 2500 so if you've already been running a B18C5 you don't have to change your sprint rates or dampening set up to account for ballast
Авто/Мото
Found a k24a4 for like $250 trying to decide if I should pick it up never owned a Honda before tho
do it
Good video , probably pull like under 200 hp if you really tinker & play around with the tune , keep up the good work & videos stay blessed bro 💯 much love & positive vibes
Thanks for the love and watching
Would a civic si trans work too?
What are you using to run the motor and what ecu I’m having trouble figuring out what to use to tune accord motor and ecu lmk some
Air fuel has to be the same ratio I think, and set vtec always on
This is a pretty good competitor, and updates ? E85? Bigger injectors, rbc manifold? Nitrous lol
Great build to compete against b series and h series
You need power steering if you want to corner good
13.50 on a slick?!? Shit, I used to run 13.50 on a stock gsr on a radial in the early 2000’s!🤔 an I missing something here???
K24a4 ...the 160 hp k series
Gsr makes more than a4
I call bull shit. Stock GSR faster than a stock Type R. LMFAO!!!!!
@@jyt3408 what type t are you talking about here doofus?
Gsr and k24a4 motors being compared here…
@@jyt3408 are you confused on k series engine codes this is the economy version
sick....keep it up!
I will...you keep watching
@@YostBuilt yo I'm about to buy a 5 speed Accord with k24 a4 what would I need to swap into 97 civic LX thinking of getting a late 80s civic from junkyard maybe swap it into it if anything I'll swap in the d16y7 into 80s civic. Could I use the transmission I'll have in the Accord.
Nice!! Stock oil pump?
Back to stock cam position
I thinks it's a good way to get into the k swap game then you can add things later thinking about doing it in my ek
Hey bud the eBay rbc intake bolts up on a4?
Yes have one on my setup
Im doing a k24a4 swap on my ek coupe, what harness & ecu you running?
I'm using k pro and ep3 manual harness car runs good k24a4 EF civic rsx base trans
Rsx type s harness and ecu
I have a k24a1 in my rsx and it’s running 10:1 afr at WOT, I want to get it tuned so bad
Just throw a 50 shot dry nitrous on it to lean it out😃
k24a2 ek dyno tuned tuneup
Lol, tell him to go Vtec killer. Easy 40-50hp gain w rbc, and bolt ons
Needs k20a cams and vtec killer
Nice 👍
Thank you for watching
Owner?
Wait till that k24A jdm swap goes it 🥸
13.5@99 is on a slick or the top end is trash 🤔
ah yes you said slicks two seconds later
Yeah ...slicks help alot
Faster than a 2014 ford fiesta st right.
#YOSTBUILT nice a a4 build!
💪🔥
How much does it cost on average for a tune?
A heart did not answer that...lol
😂😂😂
Depend where you go average like 800$ I’ve seen as low as 500$ and up towards 12-1500$
🚗🚗🚗🔥🔥🔥🔥🔥
Thanks for watching
Yo bring that pos to cal and run it at racewarz I’ll smoke that
Nah not race wars 💀
Complete stock a4?
From the valve covers down. “bolt ons” from the list he gave
Will 240hp+ 214flb of torque easy :Yost built pump fuel⛽ if not on 🌽E85 juice 🥳😎🤙🏽
Needs nitrous and k24a2 head
All it needs Its a K24A jdm swap 👍😭
well, my tq figure was close, lol
A4 are odd motors
Mine made 185 with same mods #derftuned
Why are people doing a4 swaps yuck
Much easier to find an A4, especially one mated to a manual transmission & in a car that isn't clapped out already.
If you all motor a K24A4, you'll in essence have the equivalent of an all motor K24A2 minus the additional block drilling.
Finally, you can always swap the heads... you need stronger piston heads & connecting rods for the 3 lobe system in an A4/A8, but if you're all motoring, you'd've already done that.
HC2 minimum comp weight for A4 is only 2500 so if you've already been running a B18C5 you don't have to change your sprint rates or dampening set up to account for ballast
Why are you a fa66ot? We’ll never know.