Lmao somewhat the same for me. Front end damage, thankfully not too severe, and I can get parts for each. Gonna be costly doe. Hope it went well for you!
Update...dont take any challenger to Holts body shop of green sea sc...im still dealing with them...paint has chipped twice around front due to poor prep work and they put touch up paint all around where paint has peeled...if i could post pictures i would.
Nice video,the problem I'm having is when I push on the bumber it flexes some and that play, causes the headlights to shake over bumpy roads which is so annoying to see the light bouncing with the roads surface, the headlights and bulbs are as tight as they can be,if I face a wall with the lights on and push on the front end,the headlight beam moves as well,does this sound like a major repair?
@@AutoWizard94I got it fixed, since I crashed the front end , a sensor the transmission has didn’t detect any fluid in it so it makes it not run 👍 that fluid runs thru the condenser/radiator and back to the transmission so the moment I crashed it started leakimg
@@ferper0266 same happened to me, the coolant leaked out and the car wouldn't go into any shift at time of accident, once the car was cooled down it was able to run, were you able to fix it?
hello i just got got my car wrecked and i need to do the work myself. I just got all my cooling system down.Now i need the body both fenders and hood. Are you in Cali?
hey after i put on the fender and make sure everything lines up....how do i stick the plastic wheel well behind the fender its pretty hard . do i need to take out a pin from the wheel well to make it loose?
I have a question. I know u have a 15 Challenger so it should be about the same for mine. Can I replace a front fender without removing the front bumper on a 16 charger?
I'm sure you can but it's just way easier if you remove the bumper you would've have to work around the bumper or worry about scratching anything that isn't damaged
This was a few years back, now with parts being scarce and labor rates going up, it’s more costly. I don’t really like to give pricing because you need a proper teardown to see the extent of the Damage
did he measure the Fram before you put the new radiator support that was a hard hit and made sure everything is straight or the frame rails had no buckles in them etc.
Great Video! Do you happen to know the name of the smooth plastic part that runs horizontal across the front between the bumper cover and the Grille Assembly/Action Crash? It appears to be a part of the Grill but I cant ID the name of the part exactly.
How is the front grille attached to the bumper?, does it snap into the bumper,clips or how? I'm thinking of getting a new grille,the whole piece, from 1 headlight to the other,and just want to know if I need extra hardware,or if it snaps on to the bumper.
It just being held by some pressure tabs that look like U's that you have to squeeze together and some other parts before you can get access to the grill these bumpers and grills are a little tedious just gotta be patient
@@AutoWizard94 so I tried replacing my upper grille today and it was a pain to access those screws in the fenders but the worst part for me was attaching the new grille to the bumper,i was putting the tabs from the bumper through the grille opening but the bumper Just wouldn't stay together to the the grille, after so many attempts I had to epoxy the grill to the bumper and keep it together with tape til it dried,after finishing everything and I closed the hood, there's a big gap between the nose and the hood😓 I didn't have the proper size rivets for the 2 corners next to the grille that have the plastic piece with the fender bolts,or for the nose strip either, it's barely on with wrong rivets, I order the Mopar brand but won't get it till a few more days so I'm hoping my gap issue is because of not having the right rivets and something came loose.any thoughts?is a 2012 Challenger RT/392 Stroker.
@@angelcedeno26 Honestly I've never had that problem brother and without looking at it it'll be tough to to see what the actual problem is . BUT I know that you said you had to epoxy it but I've never done that and it'll have needed constant pressure until the epoxy dried and just taping it waiting to dry doesn't keep the pressure on where it's supposed to be , those tabs are a pain in the butt and if torn that's basically what holds the whole grille in place
I could really use your help through text of course. I am putting my SXT back together the same thing happened with the same kind of impact. At this time I've already replaced the radiator condenser bar and the lower tier bar plus the left and the right fender however I stop there to order more parts but when the energy absorption bar comes the headlight bumper and Hood I won't know how to wire it a lot of my wires were cut and I don't know the pieces to order to clip them together into the headlights fog lights etc can you help me with that if we could email each other I can send you a list of things that I have on the way and you can tell me what else I need such as the names of the clips which wires are which and I even send you videos showing you what it's like at this time and when I put the larger pieces on
pedro botello yeah you can just drop or loosen the side you're trying to remove and install , but it's very tedious and you run the risk of scratching the door with all the moving of the part . You don't have to remove the whole radiator support or any of that just the front bumper
Auto Wizard ok thank you i was planning on buying a 2012 challenger listed at a good price the only bad thing is the panel is dented, so i was wondering how much effort it would take to replace it.
This is some mighty work. I got a few questions, firstly, what tool is that you’re using to take out the bolts of the fenders and radiator support? Secondly, do you think the millimeter sizes would differ on the Chargers? And lastly what socket size was the front impact steel bar piece? Mine is a 2012 and I’m trying to take the fender and radiator support off. Would love to hear from you soon as you can! Have you a like!
What’s up bro , I’m using and impact tool. They’re all gonna be pretty much the same, unless they’ve been messed with before. Dodge loves to use 8mm, 10mm, 13mm, 18mm. Your regular set of tools should carry all you need
@@laylow6834little more than that lol. Considering the hood, supports, bumper, grille, radiator, fender, headlight, and other accents. $3k-$3500 for parts alone is accurate but all with labor and paint is definitely not possible. Body work is not cheap at all.
Hey, man I own a challenger and have already gotten to the point where I have the bumper in place, only problem is, I believe I am missing a part that will allow it to align correctly. Right now it just has this big gap. Is there a way I can send you pictures of my car and you can help me in identifying what I need? thank you, dude, you have some good content here.
Dam thing happened to my charger on the right side , so right fender and headlight, got lucky my raidiayor or nothing else was damaged , just needed new bumper hood and fender, got luck I got a 2020 scatpack
Thanks for stopping by and looking at my video ! I would love to help but we work in different departments. We have a parts department that handles all of that I do strictly the body work
How do replace the headlight if it was pushed in and tabs broke? Idk what I need to replace to get the headlight to sin in like new after I replace bumper
It all depends bro I can't really give you a fixed price , there is alot of variables like shop rate, materials, parts and labor and the extent of the damage
It doesnt matter how "banged up" a body panel is, a true bodyman would never rip anything off of a car thats being repaired. There are bolts and fasteners going into good or salvageable panels, and you probably just did more damage than necessary. A true bodyman would still take great care removing even throw away parts. You never know what you might need.
Hey Marquees , we have a parts that department that usually goes and orders our parts I focus on doing the body work . Most of the time they get it straight from the manufacturer or dealers that may have parts in stock
Florida , damn it I’m waiting on a quote for my car with similar damage I’m going to pay outta pocket . I just wondering what to expect dollar wise ? Wish you were closer , I love my car only 8 months old
@@thelimitperformancetrainin7014 I don't remember how much it ended being I did this car a while back, I know it sucks to see your baby all banged up especially so new 😩
you skipped the part where you take off the piece in front of the radiator that clips to the grill and honestly that's the only part I don't know how to get off
Sorry man ☹️ this was when I first started and was trying to figure all this recording and editing stuff , if I get another I'll gladly upload and share !
We're not a a shop that does that we do insurance work to restore back for customer personal use, the car hasn't been totaled if it was this repair would've never taken place
@autowizard I have a similar damage to my 2015 charger se no insurance wondering if I can get an estimate for out of pocket. I can email you pictures. this is ernest.h
It's kinda hard to get a good estimates from just pictures alot can be missed, most of the time estimates are free at shops like ours but I don't really do estimates it's a program on the computer and our estimators at the front office have access to that
Just had a collision today with "basically" the same damage. Now I'm not so stressed about the repair. Thanks for this!
Awesome glad it could clear any doubts 🙏
@@AutoWizard94 where did u get a replacement bumper from.
Lmao somewhat the same for me. Front end damage, thankfully not too severe, and I can get parts for each. Gonna be costly doe. Hope it went well for you!
This young man does good work...he's a keeper!
Thank you, I'm glad you're enjoying the videos , thanks for the support
@@AutoWizard94 fix my challenger
Hit a deer a day after buying my 2012 rt last month...got the left fender front end and radiator and condenser...cant wait to get it back
That sucks brother I'm glad it's all getting taken care 👍
Update...dont take any challenger to Holts body shop of green sea sc...im still dealing with them...paint has chipped twice around front due to poor prep work and they put touch up paint all around where paint has peeled...if i could post pictures i would.
We need more young men like you to get into this business. Keep American Muscle Alive
Thank you I appreciate it. Gotta keep America driving!
Great vid as i just purchased a challenger with front end damage
I Love The Dodge Challenger! It’s A Beautiful Car! I Mostly Love The Back Lights! I Love How Dodge Made That! And I Love It’s Appearance!
Yup they look real nice.
@@AutoWizard94 True American Style!
Just got into an accident Wednesday identical damage. Estimated how much was it to fix with all parts?
Sorry to hear that ,Differs from car to car. parts and labor and extent of the damage
Nice video,the problem I'm having is when I push on the bumber it flexes some and that play, causes the headlights to shake over bumpy roads which is so annoying to see the light bouncing with the roads surface, the headlights and bulbs are as tight as they can be,if I face a wall with the lights on and push on the front end,the headlight beam moves as well,does this sound like a major repair?
Maybe the the lower tabs on the headlight are broken making it wobble , it hard to tell without disassembling it
how did you remove the two bolts in the wheel well close the door?
I used an extension and a cordless ratch with a 10mm socket
Auto Wizard thanks. i was able to get em loose with 10mm wrench
Single owner, clean carfax..:D
Better something „small“ like this, than a fully wrecked, bad repaired, like the Most of them here in Germany.
Right 😂😎
Damn the same shit happen to my front passenger fender this helped me visual what needs to be done ! Thanks.
I had to replace my core support/radiator/condenser but for some reason I can’t put my car into any gear, have an idea of what it could possibly be?
weird, I didnt experience that
@@AutoWizard94I got it fixed, since I crashed the front end , a sensor the transmission has didn’t detect any fluid in it so it makes it not run 👍 that fluid runs thru the condenser/radiator and back to the transmission so the moment I crashed it started leakimg
@@ferper0266 awesome, glad to hear that
@@ferper0266 same happened to me, the coolant leaked out and the car wouldn't go into any shift at time of accident, once the car was cooled down it was able to run, were you able to fix it?
Hey man. Nice work. What set of tools and drill machine you’re using? Need to buy that.
Im currently using Milwaukee m18 fuel series 3/8 impact and I also have a snap on 3/8 impact ratchet
great video! this was helpful I have to replace my radiator support from a 5 MPH impact. Thank you!!
joelmarchese1 Glad I could help, just the radiator had damage?
hello i just got got my car wrecked and i need to do the work myself. I just got all my cooling system down.Now i need the body both fenders and hood. Are you in Cali?
That sucks I'm sorry to hear that, you can try Rock Auto or car ID for parts. I'm based out of Texas
hey after i put on the fender and make sure everything lines up....how do i stick the plastic wheel well behind the fender its pretty hard . do i need to take out a pin from the wheel well to make it loose?
elena popescu you just pry it back in place it's pretty stiff you just gotta mess with it till it pushed back in
Which part of Texas?
Which part of Texas?
Do you paint parts then put on or put everything on with plastic trim then have it painted around the black trim?
No everything gets painted separate then assembled
It feels so wrong to see it without any front! Lmao. Great works!!
lol it’s gotta be a caterpillar before it’s a butterfly
Where did you source the bumper cover from? Please need help finding
Sorry I just do the repairs, I’m not sure where parts are coming from.
what tools you did you use through out this whole process?
Panel clip removal tool
3/8 impact
13 mm socket
10 mm socket
You doing a great job man keep it up 👌🏻
I have a question. I know u have a 15 Challenger so it should be about the same for mine. Can I replace a front fender without removing the front bumper on a 16 charger?
I'm sure you can but it's just way easier if you remove the bumper you would've have to work around the bumper or worry about scratching anything that isn't damaged
What’s the best place to get a near bumper already painted?
🤔 I’ve never received a bumper cover that’s pre-painted we always paint them. Maybe try a general Google search
Nice ride. Airbags didn't deploy?
br1an419 no lol and it was close to the sensors
How much does work like this usually cost? Just wrecked mine and have similar damages
This was a few years back, now with parts being scarce and labor rates going up, it’s more costly. I don’t really like to give pricing because you need a proper teardown to see the extent of the Damage
did he measure the Fram before you put the new radiator support that was a hard hit and made sure everything is straight or the frame rails had no buckles in them etc.
Mike Nolan yes we did the radiator support took most of the damage the frame rails were intact without any damage to them
Where did you find the front end clip I have that same problem now in 2020
We Have a parts Department that orders our parts.They order from dealerships all over the US
Great job young gentleman!
Thank you 🙏
How much did cost for this repair?
I have same question
Great Video! Do you happen to know the name of the smooth plastic part that runs horizontal across the front between the bumper cover and the Grille Assembly/Action Crash? It appears to be a part of the Grill but I cant ID the name of the part exactly.
I don't remember brother it's like a upper grille or upper baffle I would say
Upper Tie Bar?? Rad Cradle??
How is the front grille attached to the bumper?, does it snap into the bumper,clips or how? I'm thinking of getting a new grille,the whole piece, from 1 headlight to the other,and just want to know if I need extra hardware,or if it snaps on to the bumper.
It just being held by some pressure tabs that look like U's that you have to squeeze together and some other parts before you can get access to the grill these bumpers and grills are a little tedious just gotta be patient
@@AutoWizard94 ok thank you.
@@AutoWizard94 so I tried replacing my upper grille today and it was a pain to access those screws in the fenders but the worst part for me was attaching the new grille to the bumper,i was putting the tabs from the bumper through the grille opening but the bumper Just wouldn't stay together to the the grille, after so many attempts I had to epoxy the grill to the bumper and keep it together with tape til it dried,after finishing everything and I closed the hood, there's a big gap between the nose and the hood😓 I didn't have the proper size rivets for the 2 corners next to the grille that have the plastic piece with the fender bolts,or for the nose strip either, it's barely on with wrong rivets, I order the Mopar brand but won't get it till a few more days so I'm hoping my gap issue is because of not having the right rivets and something came loose.any thoughts?is a 2012 Challenger RT/392 Stroker.
@@angelcedeno26 Honestly I've never had that problem brother and without looking at it it'll be tough to to see what the actual problem is . BUT I know that you said you had to epoxy it but I've never done that and it'll have needed constant pressure until the epoxy dried and just taping it waiting to dry doesn't keep the pressure on where it's supposed to be , those tabs are a pain in the butt and if torn that's basically what holds the whole grille in place
@@angelcedeno26 I believe that upper grille goes tucked in behind the bumper , so if you left it over than that maybe the problem
Looks like a v6 SE...It is amazing how much cheaper a V6 is over a V8 Hemi
@BIG GAY ya sure. but its 5000 more a cylinder
I could really use your help through text of course. I am putting my SXT back together the same thing happened with the same kind of impact. At this time I've already replaced the radiator condenser bar and the lower tier bar plus the left and the right fender however I stop there to order more parts but when the energy absorption bar comes the headlight bumper and Hood I won't know how to wire it a lot of my wires were cut and I don't know the pieces to order to clip them together into the headlights fog lights etc can you help me with that if we could email each other I can send you a list of things that I have on the way and you can tell me what else I need such as the names of the clips which wires are which and I even send you videos showing you what it's like at this time and when I put the larger pieces on
Hard to do so without being there , I hope you can figure it out !
Are you guys located in ca? I need a front bumper replacement
No I’m from Texas
Hey is it possible to replace the front quarter panel without having to remove the front end at all??
pedro botello yeah you can just drop or loosen the side you're trying to remove and install , but it's very tedious and you run the risk of scratching the door with all the moving of the part . You don't have to remove the whole radiator support or any of that just the front bumper
Can it be done with a set of wrenches, or what tools will it include?
pedro botello Panel clip removal tool, sockets and ratchets and a gear wrench but a regular one will work
Auto Wizard ok thank you i was planning on buying a 2012 challenger listed at a good price the only bad thing is the panel is dented, so i was wondering how much effort it would take to replace it.
pedro botello I'm glad you stumbled on my video thanks for watching ..it's real easy I wouldn't pass it up if that's all it has
Hey i just had the same issues wanted to know where you got your parts? i have the same color and everything.
We get all of our parts from actual dealership's that carry them in stock or the manufacturer
Great video!
Where did you buy the new bumper ?
We got it from a Dodge dealership that had one
This is some mighty work. I got a few questions, firstly, what tool is that you’re using to take out the bolts of the fenders and radiator support? Secondly, do you think the millimeter sizes would differ on the Chargers? And lastly what socket size was the front impact steel bar piece? Mine is a 2012 and I’m trying to take the fender and radiator support off. Would love to hear from you soon as you can! Have you a like!
What’s up bro , I’m using and impact tool. They’re all gonna be pretty much the same, unless they’ve been messed with before. Dodge loves to use 8mm, 10mm, 13mm, 18mm. Your regular set of tools should carry all you need
@@AutoWizard94 how long did it take to complete the fix
What was the final cost , im just curious ? Awesome work btw
I don't remember honestly I'm not sure if I still have invoice but alot of things go into account, labor, materials, parts etc
$2500 to $3500
@@laylow6834little more than that lol. Considering the hood, supports, bumper, grille, radiator, fender, headlight, and other accents. $3k-$3500 for parts alone is accurate but all with labor and paint is definitely not possible. Body work is not cheap at all.
Do you know if fender removal for the 15-21 is similar to fender removal for 08-14 models?
Yeas it is , a few bolts here and there might change but overall same process
Where are you located ?
I have a the same car and the same front end damage would you be able to tell me what are the name of the parts that you replace. Thank you
There’s too many to name lol ... Bumper , Energy absorber , impact bar , Bumper filler bracket ,lower deflector, Grille, lower grille , fender , headlight , radiator support, radiator , condenser , fan assembly ,Hood , hood cover , hood insulator
Auto Wizard thank you it helps a lot
No problem Buddy hope it comes to good use
Did you have to order a new hood?
We sure did that hood was no longer good !
Can I know from where?
Where you get the parts
Hey, man I own a challenger and have already gotten to the point where I have the bumper in place, only problem is, I believe I am missing a part that will allow it to align correctly. Right now it just has this big gap. Is there a way I can send you pictures of my car and you can help me in identifying what I need? thank you, dude, you have some good content here.
Yeah for sure my email is georged435@gmail.com
Get it resolved? Similar issue
Good job
Thanks 🙌
Is there a video to you putting the bumper back on as well?
I didn't get that bro my bad.
Can u name all the parts u put on please so I can order them
Dam thing happened to my charger on the right side , so right fender and headlight, got lucky my raidiayor or nothing else was damaged , just needed new bumper hood and fender, got luck I got a 2020 scatpack
Do you know how much it would be if it was just the side part of the mirror ??
Thanks for stopping by and looking at my video ! I would love to help but we work in different departments. We have a parts department that handles all of that I do strictly the body work
What was the cost for this repair, I'm trying to pay mine out of pocket. Same exact car and damage
I don't remember bro , it was like 3k and some change
ME TOO
That sucks man, I'm Houston Tx and the guy Charged me 3400 for everything
@@ivenmartinez1835 My quote was 10k
@@mirnoyevolkodav8036 fixed mine for like 3k 🙄
Was there frame damage gotta fix mine now
no there wasn't any
What was the total price for this fix I got the same problem bro🔧😥☹️?!
With parts maybe around 1600 but again you save tons of money
I wish you showed us how you finished it, because I’m not sure what all the parts that I need for the front.
Sorry About that
How Long did this take to complete ? I have a similar damage on my Camaro
It depends how fast you get the parts, maybe two days if you have everything ready to go and a oven to bake after painted
Where can I get repair parts for a doge challenger 2015 ?
Nino Try rock auto they have a lot parts for a wide variety of cars and for a good price
*doge
How do replace the headlight if it was pushed in and tabs broke? Idk what I need to replace to get the headlight to sin in like new after I replace bumper
I don’t know what I need to get to fix headlights, it got knocked loose so idk really what needs to be fixed
Well everything behind it got replaced, it goes attached to the radiator support
What was the cost of this repair?
I don't remember brother but it was in the thousands
Was that the BUMPER COVER YOU REMOVED??
Yes
How much did that whole repair cost?
I don’t remember exactly but it was up there , around 3k or so parts are usually the killer
How much does this cost
It all depends bro I can't really give you a fixed price , there is alot of variables like shop rate, materials, parts and labor and the extent of the damage
Nice work on her.
Thanks brother
@@AutoWizard94 You're welcome.
Any videos on replacing A pillars?
Not Yet Sorry
It doesnt matter how "banged up" a body panel is, a true bodyman would never rip anything off of a car thats being repaired. There are bolts and fasteners going into good or salvageable panels, and you probably just did more damage than necessary. A true bodyman would still take great care removing even throw away parts. You never know what you might need.
How long more or less does this take? Anyone?
It all depends it's a whole process from parts to the body labor and paint, also depends where you take it
Hey, where did you bought a bumper set?
Igor Ribnik we buy them oem from the dodge dealership directly
just ignore the bent frame rails and use spacers, right
WRONG all got taken care of
What's that part you holding right there 4:28 called?
Radiator Support
Love the color
🔥🔥🔥
Where did you get your parts from
Hey Marquees , we have a parts that department that usually goes and orders our parts I focus on doing the body work . Most of the time they get it straight from the manufacturer or dealers that may have parts in stock
Where is your shop located
Where are you from, I stay close to Houston
Florida , damn it I’m waiting on a quote for my car with similar damage I’m going to pay outta pocket . I just wondering what to expect dollar wise ? Wish you were closer , I love my car only 8 months old
@@thelimitperformancetrainin7014 I don't remember how much it ended being I did this car a while back, I know it sucks to see your baby all banged up especially so new 😩
Niceee
Thanks for watching !
where was the fan
The fan is right behind the radiator itself
Electric fan on back of rad.
I got similar front end damage oh lord the estimate was 4,800
Diverse Blackman that sounds about right
Hey man, how much cost for those repair?
It all depends brother their really isn't a set price on all these repairs you have to take into account parts , labor , materials
Hello i have for sale a 2015 challeger
Salvage title but only was scratch with a key .never been crash.
HOW much are you selling it for?
you skipped the part where you take off the piece in front of the radiator that clips to the grill and honestly that's the only part I don't know how to get off
Sorry man ☹️ this was when I first started and was trying to figure all this recording and editing stuff , if I get another I'll gladly upload and share !
Where do you get the parts??
We have a parts department that usually orders from whoever has the parts available, near by dealership or straight from the manufacturer
and you sale back as the new price.....
We're not a a shop that does that we do insurance work to restore back for customer personal use, the car hasn't been totaled if it was this repair would've never taken place
@@AutoWizard94 I heard many people had been bought wrong the totalled car because they think that car was new.
Biggest pain in the ASS bumper EVER!!!
Yesss bro! The Camaro as well the older models
@autowizard I have a similar damage to my 2015 charger se no insurance wondering if I can get an estimate for out of pocket. I can email you pictures. this is ernest.h
It's kinda hard to get a good estimates from just pictures alot can be missed, most of the time estimates are free at shops like ours but I don't really do estimates it's a program on the computer and our estimators at the front office have access to that
I was hoping to see the paint and prep not just the bolting on of new parts. What a let down.
that audio is annoying
I understand didn't have another option had better music but it got copyright
Where did you buy the bumper at do you have a link ?
We have a parts guy that orders from many different distributors
How much it cost i got the same damage i want to get i t repaired
I don't remember it was around 3k close to 4
Where did u buy the parts?
We have a parts department that orders our parts, we order from dealerships all over the US