YOU are incredibly talented!! You have turned that bike into a motorcycle!! Lol! Love it!! Funny that it took you five minutes to think about putting a helmet on. Perhaps you just didn't realize how fast it would go?? Ruthie 4.27.22
@@SpACeCruizeR2o3 Wow! What a great thing to say about this young man! Great and thoughtful comments! Love it! Ruthie B. Howard HAPPY NEW YEAR 2023! 01-01-2023
Definitely put a bigger main jet so it runs cooler and better. Drill out your idle jet up a size and it will run seconds after choking. I've built 4 2 strokes and 2 4 strokes.
hey, i'm a bit of a carburetor noob so i need some help. My bike has one of those cheapo NT carbs and runs too lean at low RPM and too rich at high RPM. Would lowering the needle and fitting a bigger jet fix that? Thanks
Get some muffler wrap it will keep ya from getting burnt. Be safe I’m glad to see that thing start. You should use your go pro. So the phone is not always in the way
it would be cool to build this into one of those highly efficent recumbant bicycles with the highly aerodynamic frames and see how fast you could run it on a closed track
Bro I love the build but def should've stuffed that beast onto a nice fat tire setup and did some custom frame work or a stretched swing arm set-up. I think I've got my next project, I just finished a 110cc pitbike motor on a 20inch Mongoose with race carb.
I got the 4 strock now im returning it im getting the 2 strock is better all day im getting the 110 cc engine for my bike cant wait i do doordash it would be great for me
Your getting closer man! Open up that wallet now and get prepared to spend LOL Sounds like willy wonka Fizzy bubble car LOL I love it! How come you didn't put one of the cable throttle assemblies on it? you know if you have to much spring tension for the return on the carb valve it will snuff these engines out for some reason makes them a pain to start randomly. something do with leak it creates, I went through that first time.
I don't think so. I just pieced mine together. Parts to everything that I used in pinned comment on this video 👇 ruclips.net/video/YYgcE4Vi0sc/видео.htmlsi=Hzk36vHl1vkXz5WK
Decreasing the size of rear sprocket and increasing the size of front sprocket can modestly increase the top speed of a 4-stroke bicycle by 5 mph. Having better exhaust can increase top speed by 2 mph and better carb by 3 mph.
Extremely cool. :-) The 30 mph sounds way too low though, even my wife's 50cc scooter can run 45 on a good day. Maybe yours need some tuning, or it's restricted? My 50cc scooter has some restriction-thing in the engine and It can pass 30 mph on a flat surface.
@@HanzelFonferek Thanks for the reply. I am retired so I will put the huffy in my stand in the morning. Do recommend a 44T or 34 T sprocket. I have both. I have a 79cc 4 stroke on a Schwinn already. Saddletramp1200 is my youtube channel. Not much there. Just my bikes.
Thanks bro! It definitely has way better exceleration! Top end speed was 30mph without any adjustments... I was thinking about getting a 28t sprocket instead of the 36t to increase the speed since it already has so much torque
Put a bigger jet in your carb, and unbolt the pull start and turn it so you pull with left hand, and turn throttle with your right hand. With that air cleaner, you may have to go up several sizes bigger. Your free flowing exhaust will have the same effect as the air cleaner. DO NOT RUN IT LEAN, you'll burn the valves. Check color of spark plug, when you have it right, it will be light to medium brown, not grey or black. Check it after a medium speed run, and again after a full throttle run. Clean the fouling off the plug before each run. When you reach your test speed, run it for 5 or ten minutes, then without changing throttle, hit the kill switch, then read your plug. Running a little rich won't hurt anything. Hope this helps.
Okay got some advice for yeah if your brave enough LOL CVT is way off on that thing you know! Clearly sporting a RED spring on the Driven pully (center hole)! Either are going to need a Yellow spring! In slot 1 of the pulley! Or your going to have to drill a 1/8 hole 5/16 from hole one on the driven pulley to get your CVT to fully engage! your motor is taxing out and the cvt is not even opening up! Can tell right off buy 29mph lol That thing should be going even with governor in it at 38-40 mph easy! about 46-50 without out governor. Spring settings are for 6 inch wheels remember on that cvt! ps: hole one is left/hole 2 Center / hole 3 Right when the center hole it directly in center on the top of the shaft! looks at you!
The pedometer readings were a great addition! Fascinating, actually!!! My only suggestion would be to add music 🎶 the next time you add pedometer readings. I would assume that most people are used to having music accompany still slides/ photos. Include some upbeat bike riding 🎶 music. Just a suggestion. Especially since you have close to two minutes of still graphics. People want music to go with that. Ruthie 4.27.22
Dude this thing is awesome I’m getting one of these same predators and I’m trying to find a really good strong bike that I can mount it onto. It’s just getting a disk break set up is so difficult, you know
Thanks man! Appreciate it! Yea, for sure. The main thing is that you want a big enough frame to fit the motor. The GT All-terra bike with the triangle frame works great for the build 👍
10:48. YOU GOT A SCARF AND GLOVES ON! "I'm numb." Was that a neighbor complimenting your bike? How nice! Do I see precipitation in the air? Is that a wintery mist? In April? Wow! I don't want to live in your state. Ruthie 4.27.22
How legal are these especially in Texas lol? I heard something about if it over 49cc u gotta register it and all that somehow but if it a built bicycle there no title registration or anything lol 😂 so they impound stuff I believe or give u a fine and ticket 😂
@@HanzelFonferek thanks. I thought of looking there for a motor. I have a old mtb I wanted to get a motor for but I don’t think I’ll be using it. Might snap. …
This thing should be able to easily exceed 55. You're constantly overreving and getting tons of pumping losses to get speed. Need to raise your final gear ratio. Get a smaller wheel sprocket and/or larger drive sprocket for the torque converter.
5:11 "I need to get a ⛑️ helmet before I kill myself!" LOL. You think? Wow! What a great video! Incredibly entertaining!!! I was with you the whole way! All the attempts at starting it up....until you finally got it! Man, I am DIZZY! THE RIDE GAVE ME THE SENSATION THAT I WAS RIDING WITH YOU! DIZZY!! Ruthie 4.27.22
Thank you better put that in a little bit more of a bicycle with those big ass mountain bike fat tires or else you're gonna end up killing yourself on that thing
Heres the Link to I think most of the parts that I used to build the bike in the pinned comments of this video 👇 ruclips.net/video/YYgcE4Vi0sc/видео.html
YOU are incredibly talented!! You have turned that bike into a motorcycle!! Lol! Love it!! Funny that it took you five minutes to think about putting a helmet on. Perhaps you just didn't realize how fast it would go?? Ruthie 4.27.22
Thank you very much I appreciate it! Yeah lol it's a beast gotta be careful
@@HanzelFonferek Thank you for PINNING MY COMMENT. Means a lot. Ruthie 4.28.22
@@ruthieb.galatians220christ3 Your welcome
He's the best respectful honorable RUclips star I really look up to this brother from another
@@SpACeCruizeR2o3 Wow! What a great thing to say about this young man! Great and thoughtful comments! Love it! Ruthie B. Howard HAPPY NEW YEAR 2023! 01-01-2023
Nice bike and video I have a 212cc motorized bicycle I have over 4,000 miles on motor. 55-60mph. I have 36 tooth sprocket. Enjoy the ride bike life
Wow that's awesome man! How did you get yours to go so fast?
I'm running the 36t sprocket as well! I was thinking about changing it to a 28t to increase the speed
How fast are you going
@@tedcater9624 30mph
Do you think I might have to rejet the carb?
Definitely put a bigger main jet so it runs cooler and better. Drill out your idle jet up a size and it will run seconds after choking. I've built 4 2 strokes and 2 4 strokes.
hey, i'm a bit of a carburetor noob so i need some help. My bike has one of those cheapo NT carbs and runs too lean at low RPM and too rich at high RPM. Would lowering the needle and fitting a bigger jet fix that? Thanks
@@Fred_the_1996I’d say so 😂
@@Fred_the_1996u may be able to modify a carb off something else possibly or find a better carb
Great video. I have a 66 cc on a bike and have bought the 212 for another. Great job thanks
Thanks! Wow that's awesome! Your welcome
Now that's what ya call a proper bicycle engine 😂👍
Yessir
can a bilt hard 300cc or bigger engine be put on regular bicycles?
As long as you have a big enough bike frame to be able to hold it
Taking the governor off the engine is the only way this video could have been better. This is amazing brother
Thanks. Yeah, this was right after it was built
So amazed at your creation and how fast you did it, be careful and have fun 😊❤️👍🚴
Thanks
That’s a sweet 212 build bro keep up the good work
Thank ya bro!
Welcome bro
Get some muffler wrap it will keep ya from getting burnt. Be safe I’m glad to see that thing start. You should use your go pro. So the phone is not always in the way
Yeah good idea! Thanks bro! Yeah I will I have to unpack it yet lol
I put a G-5 silver streak together years ago. I just got a new kit and bike. I'm looking forward to the 50cc 4 stroke pull start model.
Noice
That should b a sweet build!
Love the sound of success
Yessir
it would be cool to build this into one of those highly efficent recumbant bicycles with the highly aerodynamic frames and see how fast you could run it on a closed track
That would!
That's what i am doing right now actually. Custom frame to hold it. Its gonna move.
@@geshscale6068 sweet!
@@HanzelFonferek yea! I'm going to document the building.
@@geshscale6068 That's awesome!
wow my dad has the same stingray corvette the exact same color as that aswell😮
That's funny because that's my dad's vett lol. The only thing is it's not a stingray
I respect it my brother here from new York
Thanks bro I appreciate it!
That's awesome. Im actually wearing the same type of jacket
Thanks! That's awesome man, thanks for watching
Bro I love the build but def should've stuffed that beast onto a nice fat tire setup and did some custom frame work or a stretched swing arm set-up. I think I've got my next project, I just finished a 110cc pitbike motor on a 20inch Mongoose with race carb.
Thanks bro! Noice 👍
i had one of these before, it was 50 cc and i was able to go 29 miles an hour. this should be able to go 120 for the brave.
That's awesome! Yes sir!
@@asimhussain8716ive seen a guy build 212 20hp and rven he barely hit 75mph max i wonder where people get the idea of 100mph on. A 212 bike from lol
My mini bike goes 65 with a 212
3:34 That noise when you let off the throttle... love it!
Lol! Thanks bro! It sure does sound sick! Gonna put the Muffler on asap
BIG HAPPY HAPPY NEW YEAR BRO 💯 THIS FELLA IS A SHOOTING 🌠 ⭐✨ MUCH LOVE BRO LOOK AT THAT 100 PLUS LIKES LOL MY MAN WIT THE BEAST
Happy new year! Haha, tanks bro appreciate it 🙏 🙌 💪 💯
I got the 4 strock now im returning it im getting the 2 strock is better all day im getting the 110 cc engine for my bike cant wait i do doordash it would be great for me
stroke*
Your getting closer man! Open up that wallet now and get prepared to spend LOL Sounds like willy wonka Fizzy bubble car LOL I love it! How come you didn't put one of the cable throttle assemblies on it? you know if you have to much spring tension for the return on the carb valve it will snuff these engines out for some reason makes them a pain to start randomly. something do with leak it creates, I went through that first time.
Lol yeap! It sure does! I gotta get the Muffler on it! Haha
Nice chevy man!!!!!!!
@jameslongflop3886 Thanks man!
You could probably get away with a sprocket with half the teeth, looks like you're hitting your max speed really fast!
Yea it's a beast
Honestly that’s super cool but you already know that.
Thanks, haha 😄
It’s like a Harley haha 👍🏽💨💪🏽
Lol yeah! Straight pipe baby!
How far out on each side does this stick out? It may just be that the shot is sort of fisheye, but it looks like your knees would have to be way out?
Prolly bout 1/2 ft on each side, it's not bad
Super cool bro. Nice Job.
Thanks bro! Appreciate it
Is there a kit i can buy for this? Deathrow bikes is out. Or do you have a parts list?! Thanks
I don't think so. I just pieced mine together. Parts to everything that I used in pinned comment on this video 👇
ruclips.net/video/YYgcE4Vi0sc/видео.htmlsi=Hzk36vHl1vkXz5WK
@@HanzelFonferek thank you! What about a clutch? Don't you need that with the torque converter?
@@winstonclyde Yeah it's all in one
@@winstonclyde no problem
Looks at bike, looks at bike helmet, looks back at bike... "maybe I'll go get a motorcycle helmet."
Lol 😆 🤣 yep! That's basically it!
I didn’t think women would like motorized bikes 🚲 😂😂😂😂that good 😊
Lol
Decreasing the size of rear sprocket and increasing the size of front sprocket can modestly increase the top speed of a 4-stroke bicycle by 5 mph. Having better exhaust can increase top speed by 2 mph and better carb by 3 mph.
Extremely cool. :-) The 30 mph sounds way too low though, even my wife's 50cc scooter can run 45 on a good day. Maybe yours need some tuning, or it's restricted? My 50cc scooter has some restriction-thing in the engine and It can pass 30 mph on a flat surface.
It's restricted, predators normally come with a governor on them.
Excellent! have everything to do this. I build MB's. Are you still alive? and did the frame hold up? Have a Huffy MTB & a 212 still in the box.
Yep! Yeah the frame holds up great 👍
If you have any questions feel free to ask
@@HanzelFonferek Thanks for the reply. I am retired so I will put the huffy in my stand in the morning. Do recommend a 44T or 34 T sprocket. I have both. I have a 79cc 4 stroke on a Schwinn already. Saddletramp1200 is my youtube channel. Not much there. Just my bikes.
@@Saddletramp1200 no problem 👍 I recommend the 34t if you would want the extra speed
@@HanzelFonferek I have located everything for the build but the motor mount. I can get one from my mb suppliers. If they are still in business.
Congratulations on your 212cc build 🚲💨💨💨💨 good to see you riding 💨💨💯🤙👍 so right now do you think it's as fast as your other four stroke
Thanks bro! It definitely has way better exceleration! Top end speed was 30mph without any adjustments... I was thinking about getting a 28t sprocket instead of the 36t to increase the speed since it already has so much torque
@@HanzelFonferek 🚲💨💯🤙👍
@@HanzelFonferek remove governor and you'll hit 50-60
@@SupremeODMG wow! Thats insane fast! Lol
@@HanzelFonferek it's what restricts that motor be very careful though.
Put a bigger jet in your carb, and unbolt the pull start and turn it so you pull with left hand, and turn throttle with your right hand. With that air cleaner, you may have to go up several sizes bigger. Your free flowing exhaust will have the same effect as the air cleaner. DO NOT RUN IT LEAN, you'll burn the valves. Check color of spark plug, when you have it right, it will be light to medium brown, not grey or black. Check it after a medium speed run, and again after a full throttle run. Clean the fouling off the plug before each run. When you reach your test speed, run it for 5 or ten minutes, then without changing throttle, hit the kill switch, then read your plug. Running a little rich won't hurt anything. Hope this helps.
Appreciate the info! Thank you and thanks for watching!
It’s a four stroke not a 2
I am trying to do this myself,what size bike is the bike used
It's a GT Exterra
Okay got some advice for yeah if your brave enough LOL CVT is way off on that thing you know! Clearly sporting a RED spring on the Driven pully (center hole)! Either are going to need a Yellow spring! In slot 1 of the pulley! Or your going to have to drill a 1/8 hole 5/16 from hole one on the driven pulley to get your CVT to fully engage! your motor is taxing out and the cvt is not even opening up! Can tell right off buy 29mph lol That thing should be going even with governor in it at 38-40 mph easy! about 46-50 without out governor. Spring settings are for 6 inch wheels remember on that cvt! ps: hole one is left/hole 2 Center / hole 3 Right when the center hole it directly in center on the top of the shaft! looks at you!
Ok thanks bro for the tip!
The pedometer readings were a great addition! Fascinating, actually!!! My only suggestion would be to add music 🎶 the next time you add pedometer readings. I would assume that most people are used to having music accompany still slides/ photos. Include some upbeat bike riding 🎶 music. Just a suggestion. Especially since you have close to two minutes of still graphics. People want music to go with that. Ruthie 4.27.22
Yeah that is a very good idea! Thanks! I guess I was just in a rush to get it uploaded haha
Bro that's a GT terra 👍. That's almost a collector dude.
Yea it's a GT Timberland, worked really good for the build!
@@HanzelFonferek I feel like an idiot I was saving one for years before I got into motorized bicycling and threw it away right before I started.
@@JamesPiccone oh really. Well I guess you never really know until you know lol
@@JamesPiccone they are great for 212cc builds because they have such a big frame
How are the tires holding up for the sake of speed?
So far so good. I haven't really driven it enough to find out yet
do you add extra oil since the engine isnt sitting straight?
No, and it's sitting pretty level for the most part
Sick build man!! What parts did you need to make it work??? I want to do the exact thing to my bike
Thanks man!
Pinned comment of this video ruclips.net/video/YYgcE4Vi0sc/видео.htmlsi=ua6AUwByKrXR93SQ is the parts that I used
Dude this thing is awesome I’m getting one of these same predators and I’m trying to find a really good strong bike that I can mount it onto. It’s just getting a disk break set up is so difficult, you know
Thanks man! Appreciate it! Yea, for sure. The main thing is that you want a big enough frame to fit the motor. The GT All-terra bike with the triangle frame works great for the build 👍
Where did you buy engine bracket
BikeBerry.com
@@HanzelFonferek what about drive gear sprocket and chain
@@legacy5576 pinned comment of this video
ruclips.net/video/YYgcE4Vi0sc/видео.htmlsi=RvDkmy_C3pQyuq_x
Is the parts that I used
How did you remedy the choke line bro?
You can kinda see how in this video at 7:16 in the video ruclips.net/video/FzDxUDgRCZA/видео.html
Hello how many inches was the frame? Building a 212 bike but not sure which frame to get
Idk forsure.... just look for a GT timberland mountain bike like mine 👍
Good luck on the build
@@HanzelFonferek Forsure thanks a lot for the response! Will do thanks a lot, maybe I’ll post it when I’m finished
@@aerialenthusiast7435 no problem. That would be awesome! Anymore questions just let me know
@@HanzelFonferek will do thanks!
Whered you get the motor?
Harbor freight
⚙️🚲⚙️🎚🇺🇸💯 Not a fan of 4stroke but very nice build sir.
Thanks
@@HanzelFonferek my honor. I can see you put a lot of thought into that bike. Maybe one day I’ll give the 4s a go
@@rogerstafford-wakeinc.2088 yep alot, and alot of time
10:48. YOU GOT A SCARF AND GLOVES ON! "I'm numb." Was that a neighbor complimenting your bike? How nice! Do I see precipitation in the air? Is that a wintery mist? In April? Wow! I don't want to live in your state. Ruthie 4.27.22
Yeah it was cold 🥶 it was snowing out! No the neighbor wasn't but I'm sure they will soon lol Thanks for the comments
How fast did you get it to go?
Yes, yes I think you should grab the motorcycle helmet 😂😂😂
Lol 😂
The 212 stroke engine motorized bicycle carburetor good .
“Officer I swear it’s a 49cc”
@Official_Talan lol, right haha 😄 😂
@@HanzelFonferek 😆
which cvt clutch kit did you buy?
www.amazon.com/gp/aw/d/B07VP9M641?psc=1&ref=ppx_pop_mob_b_asin_title
👍👍
👍💯🤙🚴♂️💨💨💨✌
Where can this engine kit be purchased?
I bought the engine from harbor freight and then just pieced the rest together with motorized bicycle parts from Amazon. 👍
Sweet. Thing looks like a blast to ride! Any links for the parts?
Link to all the parts in the pinned comment of this video
ruclips.net/video/YYgcE4Vi0sc/видео.html
@@farhenheit628of1200 It is a blast to ride! Totally 👍💯🤙
Yes officer, it's 50cc
Lol
I want to get a tank as big as the one on the bike
Yeah the big tank is nice
stroke the best
How legal are these especially in Texas lol? I heard something about if it over 49cc u gotta register it and all that somehow but if it a built bicycle there no title registration or anything lol 😂 so they impound stuff I believe or give u a fine and ticket 😂
I doubt it they are, lol. Anything over 49cc technically isn't legal here in Wisconsin either bit I've never had any issues
Fast😁👍
Yes sir!
What Type Of Bike Is That
GT timberland with the largest frame
Why would you not give it some throttle to keep it from dying??🤷🏻♂️
I wish I could do this with a beach cruiser
I needa make one
You should! There fun!
I build one wanna do it agein with a brand new mountain bike frame witha 212 predator engine
Nice! That should be sweet!
Man this is pretty cool and all but my motorized bike kit I threw together off Amazon for $70 and is smaller than that monstrosity does 35
Would you fill me in on the parts you used for your bike? Thank you.
How fast is it
42mph. Probably could go faster
Is it just me or does it not rev that high?
Yea, it didn't Rev that high. Now that I have it adjusted it Revs higher 👍
@@HanzelFonferek what did you adjust because I have the same issue
@@nicos9937 The carburetor
Horrible camera angle while riding. Why is the camera pointed at the ground??
Need a longer exhaust
Well done but I think that motor is too powerful for a bike , just be careful
Thanks! Will do 👍
If you wouldn't have over modded it it would have started on first pull. other than that good job.
Thank you and thanks for watching
There's no way you only got to 30mph I've done 30 on a buddy's electric bike and you were going easy faster
Max kmh ?
I think about 70ish kmh
Link for the motor. …
Harbor Freight
@@HanzelFonferek thanks. I thought of looking there for a motor. I have a old mtb I wanted to get a motor for but I don’t think I’ll be using it. Might snap. …
@@Wannaridebikes 👍💯🤙🚴♂️💨💨💨✌
@@Wannaridebikes welcome bro
Time for the governor bypass ruclips.net/video/aQFgCTbI5w0/видео.html
Did this on my go kart engine :D
Lol idk if I want to blow it up
@@HanzelFonferek lol yeah I hear that 👍
7:37 seat warmer eh
get a smaller sprocket trust me it has so much acceleration now
lower top speed tho
@@heroichitsujiI think you mean torque
Remove the governor and do a video
no air flow
What are you thinking only honda is the best
no air
Governed taken off ?
Nope, it's still governed
You shouldnt let that flag in the corner of your garage touch the ground
5:28 covid
How about you put the motor on a mini bike like a normal person would
I built a bike like the one in the vid and I can easily pick it up with one hand on a full tank
Because Normals Boring, lol
This thing should be able to easily exceed 55. You're constantly overreving and getting tons of pumping losses to get speed. Need to raise your final gear ratio. Get a smaller wheel sprocket and/or larger drive sprocket for the torque converter.
5:11 "I need to get a ⛑️ helmet before I kill myself!" LOL. You think? Wow! What a great video! Incredibly entertaining!!! I was with you the whole way! All the attempts at starting it up....until you finally got it! Man, I am DIZZY! THE RIDE GAVE ME THE SENSATION THAT I WAS RIDING WITH YOU! DIZZY!! Ruthie 4.27.22
Haha! Yep I thought I'd better put a helmet on my noggin thanks for watching
This is painful to watch I mean seriously make it run
Mabe could you upload a list with all the links of the pieces that you need to build one?
Pinned comment of this video ruclips.net/video/YYgcE4Vi0sc/видео.html is links to most of the parts that I used to build this bike
Thank you better put that in a little bit more of a bicycle with those big ass mountain bike fat tires or else you're gonna end up killing yourself on that thing
Where can i buy this kit? I have the 80cc but i want to buy this one with 212cc
Heres the Link to I think most of the parts that I used to build the bike in the pinned comments of this video 👇
ruclips.net/video/YYgcE4Vi0sc/видео.html
911 subscribers!!!! 9-1-1!!! Help!! Lol
Lol 😂
How did you get your chain to line up?
I made a custom engine mounting plate that extends out
How did you mount that to the bike?
With a engine mounting plate from BikeBerry.com and some modifications