Possible reason for Chevrolet transmission 6L80 6L90 overheating, why you may need to delete 2014 up
HTML-код
- Опубликовано: 5 окт 2024
- transgo cooler bypass amzn.to/3TKEU9q
superior cooler bypass amzn.to/40i3wss
Transmission cooler amzn.to/3Kj5raQ
check out the link below to our amazon store for items or products used in our videos
www.amazon.com...
video explains how a transmission thermostat delete works
as an amazon affiliate I earn from qualifying purchases at NO extra cost to you
Flipped the pill on mine and dropped Temps by 30-40 degrees....a must do
Thanks a lot for the demostration and explanation.
This visual demonstration is awesome. Thank you very much sir! I got my Superior STL010 installed last night. It did prevent the overheating. Highest temp remain high at 199degrees highway. Im happy with this, no leak. Prior to this had a nightmare of temp as high as 165degrees, tranny was leaking!!! On the same highway speed.
I'm sold that was a great video along with your practical visual demonstration thank you very much awesome
Excellent video, anyone can understand this. So well presented
Great video thank you sir for the demonstration
Good demonstration. A little over explained, but I guess some ppl need it.
why not just bypass the thing all together? run the hoses like the old school way. one hose from trans to cooler, one hose from cooler to trans.
Have you looked at the Transmission, HOW would you hook the line to a hole coming out of the transmission?? You would have to do some Serious modifications!
Something everyone should know is that Chevy issued a TSB and if you complain about high trans temps they will replace the TBV to the cooler 70°C one for free. If you live in a northern climate which gets cold this is what you want. The TBV delete kits are good in the summer but then your trans gets too cold in the winter.
Got the kit now , installed, and it does lower temp atleast 30 degrees..
Thanks for sharing, I ordered the kit yesterday
Where did you order your kit from
I never agreed with the direction automotive manufacturers that had a thermostat system for the transmission. What really had me torched was when I began to see this system but unfortunately the lube techs who were treated like dogs, were never trained onto service the Super Duty nor F-150 that had this system. They would receive the R.O. to see it's a 30k service ESP Ford then once after replacing items that are covered by this service plan, they would attach the BG transmission flush machine and brake tourqe the truck until the fluid was to temp for the thermostat to open, from experience with a customer's transmission started to shudder and slip, the damage from the lube techs put upon the transmission by cooking it.
Make a video of transgo plug and the stl010 and kink one cooler line and explain why you want the Sure Cool over anything. Thanks
i might just make that video
@@codemansauto208 I'm working on a similar one with working pressure cant find clear that will take the psi, bet you know how messy in can get, but I really liked the mock up. Nice display
Thanks.
Thanks for that… great demo! I have a Chevy suburban 2013 with a tow package… I can pull up to 8100lbs. I bought a travel trailer 5800lbs and my transmission got up too 210 degrees… before I pull again, what can I do to lower the temp!
Great video thank you for this, really helps with the visual learning. I installed the surecool on my 2014 Silverado and it works great in the HWy it stays around 160° however in city driving It’s still gone up to 200° at times. Any ideas or suggestions? Also do you think if I swapped out my engine coolant thermostat to open at 194° rather than 207° would help with that.
Thank you in advance.
It would help slightly on the tstadt drop, if it's running warm in town you need to add a second Cooler, like a Hayden or tru cool type in the front air flow.
Thanks
It would be easier to understand if you stopped incorrectly using the word "delete". A delete is your second example. A aftermarket bypass valve is the first
Thank you for clearing that up. I was confused by the terminology
Good video
It would have been clearer if you had used only one jug to represent the transmission.
I have a question, I'm in canada our summers are in the 80-90°f the winters can get down to -30-40°f would this be safe in those winter conditions?
Yes, your cooler also works to warm your transmission in cold temperatures because your engine heats up faster then your transmission, that was the design since automatics came out that where fluid cooled instead of air cooled
@@codemansauto208 do you think it would be okay with the cooler temperatures it would reduce any of the protection?
Hey man I watched your video on Delete kit for the thermostat on the transmission.I just want to know where would I go about ordering one of those
COOL VIDEO
Thank you so much very helpful
Why does this video suggest this for only 2014 and up? Do 2008-2013 6L80/6L90 not need to be deleted?
because the thermostat was not introduced until 2013, there is an upgrade on the fluid ( Mobil One ATF LV HP -blue label)
Great video… damn I didn’t know that
What is the inside diameter of the hose you are using for this demonstration?
Excellent
Good video, I have a question I have a 2011 Chevy 1500 and all of a sudden I didn't have drive or reverse. Tho only code that shows is 0605 and that was lack of voltage to the ECM
I loved seeing the demo there. So thats the flip? surecool ,or is that the trans go? Also I was wondering what about cold weather areas with the sure cool ? Is there a too cold?
no to cold and that was the transgo delete in the video
i knew that i wouldnt have enough pressure with that pump to change the outcome of the sure cool
@@codemansauto208 thank you I was just wondering because I just did my 6l80e with the surecool and it's be colder in 20s out side thank you for making your video helped alot !
I have a GMC yukon 2011, I can't find out the problem that why the transmission is heating up even though my transmission has been overhauled, but it's still heating up.
any suggestions?
yes take your top and bottom cooler lines off the radiator and flush the cooler from the top of the radiator forcing a back flush on your cooler this will clean the cooler on your radiator sometimes rebuilders will flush the cooler the same direction as the fluid flow and this method usually doesnt clean the cooler very well hope this helps you (use KoolerKleen)
I installed the stl010 in my truck. For my curiosity I've been trying to figure out how it works and I think I got it. What they call the "piston" is hallow. The "Bushing" is also hallow with the steel check ball. The bushing has holes on top right below the two O rings. The check ball blocks the passage of those holes and stays in place with the cone spring. If a line is kinked or there is some type of blockage, the check ball is pushed towards the "piston" allowing the fluid to flow back into the trans. This is why it is important that the spring is NOT installed backwards. If it was, the check ball could not block off the holes in the "bushing" and it would not flow through the cooler. Am I right?
yes the holes is to equal the pressure so you dont have a delayed engagement in case of a cooler drain back
What about the 08-13 i can't find any kit for that year i have a 12 looks the same
they are not equipped with a transmission thermostat starts at 2014 and up
The purpose of the thermostat is to let your trans warm up faster. Then when it reaches the thermostat temperature it opens to the cooler. This increase your MPG. A delete will cost you MPG because the trans takes so long to get to operating temperature.
yes that was the purpose for that design
the only reason was to get your lock up to come on faster to drop RPM
stay tuned for a video showing the difference in between the time it takes for the lock up to engage between a deleted and a stock
transmission thermostat
Where is the lock up video?
If you happen to live in a hot state like Florida the factory setup will cook your torque converter in short order. This was a very bad call by GM and I understand they have fessed up to their sins and offer a replacement thermostat that opens up at a much cooler temperature. Now if they could just do away with their AFM they would have some pretty good trucks.
Hi, Do you know if Escalade with 8L90 suffer from this issue?
no, I haven't seen any 8L90 with this issue like that 6L80 and 6L90
Where are you located? I want you to do the delete on my truck!
Do the 2021 gmc sle 1500 have that thermostat? So I can delete it please reply
the newest truck that we have serviced has been an 18 model so you may need to have someone to look under the truck on the driver side to see if it has one, I cant find this information on the 2021
Hello, what about 2011 ? what should i do to bypass it ?
i seen there is some item called Transmission Cooler Adapter With Thermostat
did this will work for my 2011 transmission ?
Found out about this all too late had to have my transmission rebuilt ...and went to put in a bypassed system and they Took the thermostat out And drilled and tapped a plug in the bottom of it.. is that safe
yes, it is just a lot of work to save 20 bucks
@@codemansauto208 What is normal or safe temperatures for a transmission on a 2014 Chevy Silverado 5.3
@@codemansauto208?
What do you mean by delete? Do you mean the superior solutions kit?
transgo delete
@@codemansauto208,I just paid $2,675 to have my transmission rebuilt. Plus a $60 tow charge. As long as it’s cool out,the transmission temperature stays around 145 to 150. But I know I’m going to have to do something before it gets hot out again. That’s when the temperature runs high 180 to 190
@@larryriddle4474 Would you be so kind and tell us the year and model of the truck, and also the miles it had when the trans gave up? Thank you!
Is this something I should consider doing to my 2012 4×4 suburban 1500 lt?
I'd like to be able to tow with it...
your 2012 should not have this thermostat on it but if you plan on towing with it you should think about a larger external cooler and a billet style torque converter also be sure to upgrade your transmission fluid to Mobil one full synthetic LV HP
Is the “delete” the same as “flipping the pill”?
No! There is no safety check ball. If there is a blockage in the line or cooler it will STOP the flow of oil and you will burn the trans. The check ball in the Stl010 will push back against the spring and allow oil flow back into the trans to get you to a safe location. Also it will equal the pressure so you don't have a delayed engagement into gear on a cold transmission.
I flipped the pill on mine and has been ok for 10 months.
Do you still feel the same way about the trans go delete?
yes i like the trans go delete
@@codemansauto208 Thanks, it seems just as good, but cheaper.
So if you've plugged the bypass, if the cooler starts to plug or restrict flow from the cooler into the trans what do you do now? If you have plugged it your in trouble. = No flow.
@@superiortransmissionpartsi5357 if the cooler plugs youll still blow the transmission from overheating even with the sure cool.
@@robertbalboa197 how? It's looping in the bypass, if you plugged it yes your screwed.
Hey im currently debating between the stl010 , and the new updated GM bypass from the dealer , any suggestions? Im honestly leaning towards the rebuild kit just not sure how the updated GM differs
This is mind-boggling, makes no sense to even have a thermostat.
Thermostats help reach operating temp faster. Not prevent overheating.
@Mike yep, the original wouldn't prevent overheating, but the gm replacement thermal bypass valve opens at 158° instead of 194° so it should run significantly cooler and stay out of the tranny killing zone.
it is called money