There isn’t “head lift” in the game for liquids so gravity really isn’t an issue. Adding N2 to your water, it will be fine. Just don’t add Vol Pol, N2O or any other liquid with your water. Getting N2O the easiest way is via nitrice. And it too likes to be a liquid. Personally I don’t like using turbo fuel mix. I’ve found it more of a pain to use vs the reward. If you do want to use turbo fuel, keep you N2O pure, no pressuring gas. I’ll let you figure out to work with it. It will teach ya good!
Don't get too overwhelmed by mips. It's actually quite simple. Load(l) set(s) branch(b [goto line name]). With extra bits like Less than (llt, slt, blt) Greater than (lgt, sgt, bgt) Register values are in the chip only and are referred to in equations. R0-R15. Channels that cross networks. 0-7 # = notes Alias sets a name to a register or device. D0-5 are the screws. And if you hover over any command in programming it will give you more information. (Such as how to format the equation.) Blt (branch to c if a
Put a pressure regulator before your canisters to prevent explosions. Then set pressure to 8000kpa for normal canisters. And 20,000kpa for smart canisters. Also worth noting the sun does radiate some heat and change the pressure within vessels. Insulated everything is a good standard.
Make canned fries 🍟 instead of baked potatoes. They don't decay. And it's a 2 star food. That gives you 125% hydration max because of it. 3 star foods are 150 or 175% hydration max (unsure which I forget.)
Hype! and Water!
There isn’t “head lift” in the game for liquids so gravity really isn’t an issue. Adding N2 to your water, it will be fine. Just don’t add Vol Pol, N2O or any other liquid with your water. Getting N2O the easiest way is via nitrice. And it too likes to be a liquid. Personally I don’t like using turbo fuel mix. I’ve found it more of a pain to use vs the reward. If you do want to use turbo fuel, keep you N2O pure, no pressuring gas. I’ll let you figure out to work with it. It will teach ya good!
Don't get too overwhelmed by mips. It's actually quite simple.
Load(l) set(s) branch(b [goto line name]).
With extra bits like
Less than (llt, slt, blt)
Greater than (lgt, sgt, bgt)
Register values are in the chip only and are referred to in equations. R0-R15.
Channels that cross networks. 0-7
# = notes
Alias sets a name to a register or device.
D0-5 are the screws.
And if you hover over any command in programming it will give you more information. (Such as how to format the equation.)
Blt (branch to c if a
Don't need to "create" n20. Mine nitrice. It releases N and N20.
Also worth noting to be careful with liquids. Might go boom at room temp.
Also I kinda want to share someone reviewing my base on RUclips. But, I don't want you to stop streaming stationeers.
Put a pressure regulator before your canisters to prevent explosions. Then set pressure to 8000kpa for normal canisters. And 20,000kpa for smart canisters.
Also worth noting the sun does radiate some heat and change the pressure within vessels. Insulated everything is a good standard.
Make canned fries 🍟 instead of baked potatoes. They don't decay. And it's a 2 star food. That gives you 125% hydration max because of it. 3 star foods are 150 or 175% hydration max (unsure which I forget.)