Great video! I replaced mine in the summer on my 218d and did the rears only two weeks ago. Also fitted Brembo discs and pads, great quality and a good price from Eurocarparts. I would say they take longer than expected to bed in and get to their optimum braking efficiency, other than that, pretty straightforward job!
Cool video. Clear and to the point but with nice extra info. My front brakes had a wobble for exactly that reason - it sat barely driven for ~8 weeks whilst being prepped for sale. I would say you should clean around the brake fluid reservoir as instructed before opening. You also didn’t apply anything to the hub before fitting the new disc - there’s a good chance it’ll seize and need a hammer now to release it in future 👍
Hi, been watching alot of your videos and I've enjoyed them. The Milwaukee sander looks a good bit of kit and I'm thinking of getting one, can you tell me where you get the replacement sanding discs from?
Great video 👍. The only one with th TWR calipers (are they better than others?). Do you still have the reference for the brembo brake pads by any chance?
I changed my disks pads & rear shoes front & back a fortnight ago. Everything is good but the rears are squeezing like f**k when I come to a full stop 🤦♂️ any ideas? Iv done 800 miles on them so can’t be the coating Thanks
might be worth popping the pads out again and sanding the glaze off the pads, and sanding the corners off the braking material, that usually helps, Thanks for the great comments👍🏻👍🏻🛠
Another great video Anton.... Thank you for sharing. My wife's Honda Jazz is close to requiring some new front pads, it's always had Honda OEM in the past, however they tend to be a little bit pricey in comparison. I may give the Brembo's a pint, as opposed to eg Mintex. How's the AF btw? All under control I hope 🤔 Regards..... Mike your neighbour in Nottingham 😊
The BREMBO discs and pads are the best I have used, the painted inner sections on the discs are so clean really finished well, The af is under control, I have had 2 episodes in the last 6 months, now on new medication now so see how it goes. Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Thank you for your quick response & opinion on the Brembo's, I will order some maybe from GSF. Pleased you're AF is under control 😊 Many thanks Mike 😉
hello. you are making four mistakes. mistake 1. you don't lubricate the place where the disc rests. mistake 2. you don't clean the very dirty caliper. mistake 3. you don't lubricate the sliding pins. and mistake 4. you don't lubricate the points of contact of the tiles with the slides. these from me with love. giorgoe from Corinth Greece. be well, be strong and pay more attention to detail.
![FNAF vs TF2 - Episode 2 [SFM]](http://i.ytimg.com/vi/z5b3V2-VLb0/mqdefault.jpg)
Fantastic video and clean explanation of the process. Thanks!
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
Great video! I replaced mine in the summer on my 218d and did the rears only two weeks ago. Also fitted Brembo discs and pads, great quality and a good price from Eurocarparts. I would say they take longer than expected to bed in and get to their optimum braking efficiency, other than that, pretty straightforward job!
The Brembo discs are lovely, the painted inners are clean, a really nice touch, Thanks for the great comments👍🏻👍🏻🛠
Top job mate nice and simple great video footage 👍
Thanks Norm Merry Christmas, well it is the 1st December😂 Thanks for the great comments👍🏻👍🏻🛠
Great video lad 👍
Glad you enjoyed Thanks for the great comments👍🏻👍🏻🛠
Cool video. Clear and to the point but with nice extra info. My front brakes had a wobble for exactly that reason - it sat barely driven for ~8 weeks whilst being prepped for sale.
I would say you should clean around the brake fluid reservoir as instructed before opening. You also didn’t apply anything to the hub before fitting the new disc - there’s a good chance it’ll seize and need a hammer now to release it in future 👍
Thanks for the great information👍🏻👍🏻🛠
Brilliant vid mate this helps me out a lot. Thanks
Thanks for the great comments👍🏻👍🏻🛠
Thank you so much!
You're welcome! Thanks for the great comments👍🏻👍🏻🛠
Hi, been watching alot of your videos and I've enjoyed them. The Milwaukee sander looks a good bit of kit and I'm thinking of getting one, can you tell me where you get the replacement sanding discs from?
Great prices on amazon link is amzn.to/3SdkRQg hope this helps Thanks for the great comments👍🏻👍🏻🛠
Great video 👍. The only one with th TWR calipers (are they better than others?). Do you still have the reference for the brembo brake pads by any chance?
Yes I do Brembo Brake Pads £48 amzn.to/3qOyw6M The TWR calipers are Nice, but no better than the others, Thanks for the great comments👍🏻👍🏻🛠
Looks like an E88 MSport Plus car with the 303M wheels. One of the run out models of the E88. Has it got blue stitching on the seats ?
I don't think so! Great Car, Thanks for the great comments👍🏻👍🏻🛠
Tienes herramientas para todo, eso es muy importante
Thanks for the great comments👍🏻👍🏻🛠
Buen trabajo 👍
Thanks for the great comments👍🏻👍🏻🛠
I changed my disks pads & rear shoes front & back a fortnight ago. Everything is good but the rears are squeezing like f**k when I come to a full stop 🤦♂️ any ideas? Iv done 800 miles on them so can’t be the coating
Thanks
What make of brake pads have you fitted? Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 juratek disks & pads. They we’re just what my local motor parts suppliers had on shelf. Thanks for the quick reply. Cars a 2015 118D
might be worth popping the pads out again and sanding the glaze off the pads, and sanding the corners off the braking material, that usually helps, Thanks for the great comments👍🏻👍🏻🛠
Also, did you not need to clean off the protective film/grease on the discs prior to replacing!
No need, just drive the thing!😂 Thanks for the great comments👍🏻👍🏻🛠
much difference between the front and the back ?
This is the video for the rears ruclips.net/video/e8cwkwyMdXA/видео.html Thanks for the great comments👍🏻👍🏻🛠
Do you need to change the wear sensor
only if its worn out, Thanks for the great comments👍🏻👍🏻🛠
Hi have you done your rear disc and pads 👍
Yes I have ruclips.net/video/e8cwkwyMdXA/видео.html Thanks for the great comments👍🏻👍🏻🛠
Another great video Anton.... Thank you for sharing.
My wife's Honda Jazz is close to requiring some new front pads, it's always had Honda OEM in the past, however they tend to be a little bit pricey in comparison.
I may give the Brembo's a pint, as opposed to eg Mintex.
How's the AF btw? All under control I hope 🤔
Regards..... Mike your neighbour in Nottingham 😊
The BREMBO discs and pads are the best I have used, the painted inner sections on the discs are so clean really finished well,
The af is under control, I have had 2 episodes in the last 6 months, now on new medication now so see how it goes.
Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Thank you for your quick response & opinion on the Brembo's, I will order some maybe from GSF.
Pleased you're AF is under control 😊
Many thanks Mike 😉
Don’t recommend using the locking wheel nut key with an impact gun as they are not designed for such use and can be ruined.
I haven't had any issues with the Milwaukee impact set to 120nm torque, Thanks for the great comments👍🏻👍🏻🛠
hello. you are making four mistakes. mistake 1. you don't lubricate the place where the disc rests. mistake 2. you don't clean the very dirty caliper. mistake 3. you don't lubricate the sliding pins. and mistake 4. you don't lubricate the points of contact of the tiles with the slides. these from me with love. giorgoe from Corinth Greece. be well, be strong and pay more attention to detail.
There's more than one way to skin a cat 😂, Thanks for the great information👍🏻👍🏻🛠
@@aaanton11 it's not information, you already know it. they are a way of working.. as for the cat's skin,... I don't understand it.