We Bought a Mini Bike to Flip for Profit and GOT BURNED!
HTML-код
- Опубликовано: 3 авг 2024
- We bought a 1970s Trail Horse GTO mini bike on Facebook Marketplace to try to get running and flip for profit, and we got burned big time! The vintage mini bike revealed usual amounts of jank while we were going over it- hose clamps on the brake cables, a jerry rigged throttle assembly, and chunky oil, but the real issue was when we started it up!
The mini bike hadn't run in 20 years, and we think we know why it was parked. When we started up this vintage Tecumseh HS50, it made the worst knocking noise! We rode it anyway, and we cruised and raced it with two other vintage mini bikes. The ride ended... badly. Check it out!
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
Mini bike brake kit: bit.ly/3lGK4Xf
Vintage twist grip assembly (1” diameter): bit.ly/3ObN9b8
DID 420 chain (overkill on this project): bit.ly/2l6zklT
Best chain for vintage application: bit.ly/2RL38UY
Go Power Sports: bit.ly/3QKyODE
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video. Авто/Мото
I'm 70 years old and watch you funny guys all the time and when I get up around 6.30 am watching you all is sometimes better then taking my VA pain meds.
I agree ,I'm also a vet and give you guys an A++ !
Just subscribed to your channel! Impressive 👍
15:40 is so hilarious😂 you know you're into vintage mini bikes when it takes you and the boys 2 minutes to start up your bikes
Spies Like Us is one of the greatest movies EVER!!
you guys should make a custom kick starter for a small tecumseh bike.
Do a rebuild
Spies Like Us
"Spies Like Us" Chase/Akroyd
The longer format is way better. The chemistry between you guys really shines that way. Fantastic video.
40 minutes of utter chaos, im here for it!
Hearing John lose it as Ike starts it up for the first time and hears that nasty knock. Great content on this one.
Ike.. "It feels funny when i pull it". 🤣😂 The look on John and Charles' face was priceless.
The force is with you guys, thank you for the laughs, the longer format and throwing a shoutout to friendships ❤
I really dig the longer episodes. Makes the wait so much sweeter guys! Keep up the good science! Lol
I love how you can tell they are having way more fun each episode, and it makes the content even better.
@@xBlade_gg absolutely it almost like there more rested up to make a more exciting videos 😊
I love the low horsepower videos. 3 mini-bikes with a combined 15 horsepower (once upon a time) and tons of fun. It was a great way to spend some time watching. Thanks!
You 3 definitely got your mojo back 😊
Great episode 👏
I'm fine with a video a week. 45 minutes to an hour long is fine as well. I'm just happy for u guys. to see the channel grow and how far y'all have come, especially John. i also can't believe how much time has passed, when u are a kid time is slow af, then when u get grown, it gets faster and faster.
Yes it does,then it just won't slow down!!!!!😂😂😂😂
Cool mini bikes it takes me back to the 70s.
The movie reference is Spies like US, doctor 🤣
I think these are some of the most interesting ones you guys do is when something fails and we get to see what happened inside.
I missed you guys…..this less video thing is so sad lol but I am 100000% behind it and love you guys keep it up!!!
These longer videos are so much better!
Quality>quantity
Dude when Charles did the little "you can keep on knockin but you can't come in" I instantly thought of cheech from up in smoke lol. You guys are awesome I haven't missed an episode in years. Keep it up guys!
Dave's not here.
Ha , I love it when he says " I couldn't have blown it up already" that look on his face is priceless. Great work guys
Thank you guys a lot for making longer videos. Love you guys.
Ike's laugh @ 24:11 😆
Great episode fellers! Keep up the awesome work. Loving the longer format!
I thought it was hilarious that Ike was laughing before Charles even finished laying it down
It was way too long ... i would not have clicked if i had known it was 46 minutes but thank goodness for fast forward... I trimmed it down to about 25 minutes as much of it was just nothing
man im with Charles""i was hoping it would have chunked a rod""
Love how yall put ike on the half blown 1 😂
I'm old. I remember The Three Stooges doing "Dr.", "Dr.", "Dr."
I also remember an episode of M*A*S*H when they did a version of it in the 1970s....
Big fan! Reliving my youth through you guys!!!
Watching you three guys trying to start y'all's minibikes was just downright hilarious to me 😂
*phew*! 😮💨
I think that I've kinda been holding my breath waiting for the next video from you guys!
Thanks, I can breathe again.
Love the mini bike content. We used to have an old Sears 2-speed mini bike when I was a kid. Had a foot brake that pressed against the tire itself. My grandfather fab’d up a wood block to replace it when it wore out. Worked really well actually. Would love to find one
I'm enjoying the longer and more detailed content. Thank you for the change.
"we got out of it what we wanted to, we had fun".
More proof that Charles is an person of the highest caliber. What a great dude.
The green one is the coolest looking worthy of full resto
Charles is just such a wholesome dude! All the guys are in fact wholesome!
Like the new set up guys . The fewer and some longer videos gives me something to look forward to . 👍👍🤟
I love these engines, I have a 196 from a snowblower that’s on a homemade chassis and the thing is a champ starts first pull and runs like a dream.
‘Spies Like Us’
I love that scene. “Doctor, doctor. Doctor, doctor. Doctor, doctor. Doctor, doctor….” 😂
I love these kind of videos everyone with a smile and having a blast !
I really like the longer episodes. Nice to hear you guys having fun.
Quality content. It was great before but this was even better. Thanks Guys!
Is it just a coincidence they posted this on 4:20 pm? 😂
I noticed that as I was sparking up
It’s only 12:20 where I live 😢 oh well I just burned one ten minutes ago LOL
Charles, you keep knocking but you can't come in. That is freaking priceless😂
30:26 "he's sellin hotdogs in the woods" has to be the funniest shit I've ever heard
You guys were so lucky to not destroy that engine I have never seen that happen before. I always enjoy your videos
As a child of the 70s, I remember when these were new. I don't remember them being so sketchy, but that's probably the naivety of youth. Things changed for the better when we got a Z50 though & the Trail 70 was like getting a Ferrari to my brothers & I. I only rode it once. The family rule was we had to be tall enough to ride, & I'm the youngest. It was a couple of years before 1 of my brothers relented to my whining. I took 1 lap of our course & when I got around to the long straight all I wanted to do was a top speed run. I did it & when the corner came, I went straight... ....into the trees. By the time I was allowed to ride it again, it was gone. This is why I like your channel, memories. Keep up the great work.
loved it great video! I love yall so much great laughs every time watched every second of it
“Spies like us”. One of my favorites
Nice episode guys!!
"Spies Like Us" reminds me good old times 😁
This channel is always super interesting and fun. Like hanging out in the garage with own friends.
The whole scene with pulling it and then Ike saying johns fly down I could not stop 😂
Was a really great treat to see yas ripping the bikes again!
Man love your videos you guys are the best. Love too see you beat on those mini bikes.
Needed laughs today and the three of you did not disappoint.
"Sounds like somebody building a new roof." 😂
Yeah, lots of hammer images.😂
Thanks for a good old fashioned Cars and Cameras video 👍👍👍👍
😂😂😂 I SEE YOU GUYS WATCHING HIM PULL START IN THE CORNER OF YOUR EYES AND THEN IKES FACE WHEN IT FUMBLED OVER TRYING TO START😂😂😂
You guys would know more about this than I do. But, I've always thought Tecumseh's were kinda garbage. Wouldn't those things be better off with Briggs in them?
I haven’t heard of many problems with tecumsehs they were cheap but good their vtwin have dual carbs
Yes tecumsehs are a lesser quality engine than briggs
Tecumsehs tend to leak oil faster than any other brand ive seen tecumsehs when they develop the slightest rod knock its best to go ahead and start looking for a replacement engine immediately because it wont be long before it throws parts of the connecting rod out of the block
Every Tecumseh I’ve owned had relentless carburetor problems. The motors themselves seem to be great when you swap the factory carbs.
My older brother had an old Rupp Roadster 2 that had a Tecumseh motor, and it never failed. Of course, other parts broke, and were unable to be replaced. (This back in the 80s, long after they went out of production, and long before the internet.) We would ride double, and he could get air off a hill in the woods behind our house.
Only thing good they made was the snow king
That's wide open and it's making a lot of noise. why is it making so much noise? Ike always makes me LMFAO. that description that Ike mentioned is definitely a a rod knock. that was really good save that Charles did there. Ike ran over Charles air cleaner. this video was definitely hilarious.
Guys keep doing what you’re doing enjoying the videos
The views this video got in hour should be recorded love this channel
You guys could be on that show "Seconds Before Disaster"!
This one was one of the funniest episodes of cars and cameras 😂
The patina on the green one is awesome
The green one sounded lovely. Looked lovely. I want it.
C&C: In the future we're gonna be safer
John: haven't been back there in 3 months
Charles: YOLOOOOOOO!!!
When there's a tecumseh fitted, suspect everything is broken until proven otherwise... :P
I loved the shot of Charles riding over the hill into the sunset. Lol
Fun riding around the track. Good video.
I restored a Trail Horse for a friend. It has the two speed clutch system, and rear suspension. Glad to see another Trail Horse!
Love it. Sounds like a hammer falling down the stairs, great expression.😂
OMG I'm laughing my arse off. That was a blast and the race was so close. Makes me want to grab me a mini bike now. Oh yeah, my coasters are still looking good.
best video in a long time! I laughed hard. keep it up!
"Variable valve timing.... one time" lol
Never seen a setup like that in 45 years of working on small engines
You guys lucky I don't live next door, you'd never get rid of me. Awesome fun watching, thanks guys!!
Poor Ike.. Always setting him up. 😅 He's gonna getcha back one of these days, ya know! Lol
This was a very fun episode!
Spys like us was the movie. "doctor doctor" Man what a great episode I had fun!
Charles if you want a bike made in North Carolina… make one you guys have the equipment to make your own mini bike from scratch go for it ,send it !
On the roller bearing Tecs, the cover goes on (with the bearing in it,) then the snap ring, then the oil seal. To remove the cover, remove the seal first, then the snap ring, then the cover. Pretty cool to see an HS35/HS40 with one....Out of the dozen Tecs I've owned, none have had a bearing. Tec is a good motor....WHEN it runs. Also.....for HS40 and HS50 blocks only, the ARC billet rod #6282 for the OHV Enduro engines will actually fit. The dipper is slightly off due to the angled cylinder of the OHV, but it still works, and is cheap insurance since Tecs have poor oiling to the stock rod.
If that bike is knockin', Let Isaac do the rockin'!
Absolutely love this video. Favorite part was the crank up of all three bikes 😂 I just got my hands on one identical to the orange Roper those are sweeeeet!
19:34 A sound you don't want your engine to make lol
Its not a total loss if you learned something new and you did. Good job as always boys.
Spy's like us
One of my most favorite movies
Chevy Chase
Dan Aykroyd
Thank you for making another great episode
Looked like fun
👍👍
you guys are having too damn much fun!! "It's wide open... AND it's makin a lot of Noise!!"
spys like us,
is the movie , great video ya'll put out as always
I’m with you John, old Tecumseh’s are cool! Even though you’ve all decided to part it out. I hope somehow you guys change your minds and find a way to fix it. It would make the story even cooler!
I'd imagine that it would be possible for a machine-shop to put a bushing into the block and save it.
Granted, the hole for the governor shaft would need bushed too, and there might be other damage from all that metal and silicone floating around in there. Still, might be a worthwhile block to keep around for experimental builds/mods.
What's more fun than going "fast" on a slow machine. LOVE IT!!!
That was awesome guys
You guys looked like y’all had some good’O old school fun in this one 😅👌💪
10:00 I love the way this sounded XD For some reason it was funny and very unexpected.
That was a fun episode. Scammers don’t even try you will be junked faster that the engine was.
Y'all gotta be pulling my leg! Pulling one, Isaac! He's "the small engine whisperer." Lmao!
Spies Like Us... CLASSIC cinema!!
You reeled me back in with the Cheech and Chong reference. Dave's not here man!
I had a flipping good time!!!! Thanks for sharing
The green one sounds really good!
Lol our vintage car developed rod knock a few days ago and now a bunch of videos are rod knock videos lol
I saw a fat tire trail bike at Lowes for $800. It's tempting. I have a lot of mountain trails right near me and I think to would work. Might be some ruts, rocks, roots, and steep parts I'd have to stand and throttle the bike through it though. I think it would fit in the back of my Pacifica too. Would even have to deal with a trailer.
1 of the hitch mounted trays will be fine too.But yes,it'll fit in a Pacifica.Have fun.
If it's the Colman looking one, I'm not a fan. I sat on it, and I was like, nope, I like my baja warrior better.
@@derpydog1008 it wasn't like th smaller Coleman bikes. Had big tires. Bigger everything really. Been reading and it says it has some kind of gear ruduction / cvt transmission. That worries me a little if I'm being honest. Has a headlight. That's a bonus. Does 20mph or so out of the box. 20-26 ungoverened.
@@joshuagibson2520 is it the dark gray one?
@@derpydog1008 yeah. Grey or black. It's AXIS branded.
Haha 😂 allsome work guys from cruzermans inventions so cool ❤
Very enjoyable video!!!
I love how the captions says [applause] when the engine first started
see you guys in texas keep up the great work
great stuff guys thanks