Ive been tig welding for 9 years, 4 years of voc school, 5 on the job. i found your channel very informative and well made keep up the good work. i made a third hand and i love it!
Your tips have helped me improve my welding. I just ordered two copies of the Metals book on your recommendation. I was amused to find used copies on Amazon for as much as $40. Thanks a lot.
dont change a thing. we all learn from you. dont listen to haters. thats why i watch all your videos because your not fake. thanks again and godbless you and your family.
I know it's an old comment but, brilliant! See, not your average dumbass or RUclips troll thinks on that level though. Show them a breakthrough in medicine, theyll bring you another disease. Lol
I have been welding for a few years but am just starting to weld aluminum. I have a nice Thermal Arc Acr Master Pro and have some good luck with it so far but not 100% sure of setting the pulse yet. My nephew just got out of A trade school were he took welding and he really can't weld but I bet if his teachers were more like you he would have a job welding and no flipping burgers. Thanks again.
I wondered if you knew anything good or bad about the TIG Pulse Arc Welders made by Sunstone Engineering? I would like to butt weld very thin (.012 - .020) sheet aluminum, stainless and titanium for something I would like to mass produce which would be exposed to heat . This Pulse Arc Welder will do the job with no filler metal. After watching your video on TIG welding aluminum and how but joints exposed to heat will crack when no filler metal is used now has me wondering?
Another good video! You ever hear of LESOTA LT-2000 stick rod? I got some and have no idea what it is. It's got a red colored flux coating. I'd like to know so I can use it .
The PowerTIG 185 looked really good in Jody's videos. It's also got a simpler setup and last time I looked it was going for a great price. I might pick one up this summer. It does have HF and you can get one with a pedal too. Hope this helps you!
I see a lot of your videos where you're using an everlast 140st or 160sth.. do they have a " next step" that welds AC as well as DC? with all the perks like HF, pedal, size, ease of set up and cost?
Awesome vid's. Have you already done a video on how to set your welder for aluminum? I'm just learning and the welder I borrow has a shit load of setting & dials
Mate, thanks for your great videos. You should start a Facebook group so I can promote you. I am about to start welding together a 5052 Alu hull. The tip for putting the pulse on 1 second intervals has helped me a lot. Thanks again! Deon
Hey Jody do you think it is better to do a vertical or a down or is it a preference. I mean will the bead be as strong either way or will the penetration be more shallow in one application than the other
Excellent video. For a woodworking guy who really has no clue about any welding whatsoever but needs to learn about welding aluminum so I can add a 1/2 inch extension to the skeg on my boat's Volvo outdrive so this helped me a lot! First I need to find out what type (number) aluminum the outdrive is made of! then get the rod the extension piece of metal of the same type and the appropriate rod. I might just do it with a blow torch for now, though, since I don't have an welding machine like that and a catalane torch produces pretty good heat. Plus I don't need perfect beads like that since I have to grind it smooth in the end for paint. So anyone with advice for me please do chime in! Thx.
Id like to get the book but the price in NZ is US$120 to $140! Even direct from Lincoln it is US$80. $68 postage for a single book!!! Non profit? Love your videos! You have turned me into a gifted amateur!! Are you on Patreon? If not you should be! I have a few dollars every month spare!!
I was in the same situation, shipping was almost 10x more than the book from the institute. I was able to find one used on abebooks at reasonable price and shipping.
Are you a teacher, too? I mean like a paid teacher at some institute? Bc if ur not, u should be. U really know ur stuff. I think u'd make some great welders in no time.
There is talk of 2024 and 7075 welding processes now nine years after this was published. I think I saw Jody review that process briefly in one of the fab techs he attended 2019?
Keep on using we. it's a good habit for class, and even better in a business arena. in the past I worked for boneheads that had nothing more than a clue of what I might be doing, and yet have the nerve to speak to the customer in terms of "I did this for you or I took care of that for you" We is proper.
I like The 'We". Inorder for him to know that you say "We" he became a second party in this interaction, so tell him or her that tey them self made it "we" once they clicked Play.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Just wanted to say thank you for taking the time to post all of these great videos for all of us wannabe welders. Thanks so much man!
Great shots of the Arc! I don't think I have ever seen such a clear shot of the arc in any video!
Keep em coming!
Ive been tig welding for 9 years, 4 years of voc school, 5 on the job. i found your channel very informative and well made keep up the good work. i made a third hand and i love it!
best arc shots and presentation on the flippin internet hands down.period!
Once again, thank you for your effort. Best weld puddle shots on youtube.
Thankyou very much for making these informative videos. My welding has improved ten folds since i started watching your videos..
"smokin hot" ...awesome...I give my wife the occasional shout out.....its worth it every time!
Your tips have helped me improve my welding. I just ordered two copies of the Metals book on your recommendation. I was amused to find used copies on Amazon for as much as $40. Thanks a lot.
dont change a thing. we all learn from you. dont listen to haters. thats why i watch all your videos because your not fake. thanks again and godbless you and your family.
"we", is correct. The "we" is the instructor and the audience.
I know it's an old comment but, brilliant! See, not your average dumbass or RUclips troll thinks on that level though. Show them a breakthrough in medicine, theyll bring you another disease. Lol
I have been welding for a few years but am just starting to weld aluminum. I have a nice Thermal Arc Acr Master Pro and have some good luck with it so far but not 100% sure of setting the pulse yet. My nephew just got out of A trade school were he took welding and he really can't weld but I bet if his teachers were more like you he would have a job welding and no flipping burgers. Thanks again.
I wondered if you knew anything good or bad about the TIG Pulse Arc Welders made by Sunstone Engineering?
I would like to butt weld very thin (.012 - .020) sheet aluminum, stainless and titanium for something I would like to mass produce which would be exposed to heat .
This Pulse Arc Welder will do the job with no filler metal. After watching your video on TIG welding aluminum and how but joints exposed to heat will crack when no filler metal is used now has me wondering?
Thank you. Your channel is fantastic. Thanks for all the effort you put into your videos.
great little vid, I am currently doing advanced Gtaw aluminium at tech and find these clips very informative .. thankyou Jody ...
Another good video! You ever hear of LESOTA LT-2000 stick rod? I got some and have no idea what it is. It's got a red colored flux coating. I'd like to know so I can use it .
man i wish your were my welding instructor ..good videos thanks for posting
The PowerTIG 185 looked really good in Jody's videos. It's also got a simpler setup and last time I looked it was going for a great price. I might pick one up this summer. It does have HF and you can get one with a pedal too. Hope this helps you!
I watch a lot of welding video's and usually learn a thing or two.When I watch his videos,I learn 14 things.
Thanks Jody for giving back
Great vid, as usual. And yours can never be too long.
I see a lot of your videos where you're using an everlast 140st or 160sth.. do they have a " next step" that welds AC as well as DC? with all the perks like HF, pedal, size, ease of set up and cost?
Awesome vid's.
Have you already done a video on how to set your welder for aluminum?
I'm just learning and the welder I borrow has a shit load of setting & dials
Thank you so much from Belarus!
Mate, thanks for your great videos. You should start a Facebook group so I can promote you.
I am about to start welding together a 5052 Alu hull.
The tip for putting the pulse on 1 second intervals has helped me a lot.
Thanks again!
Deon
What is the best gas pressure to use with the spool gun?
We is you and the viewers don’t listen to the haters
not sucking up its speaking your mind jody would make a great teacher for people like us that dont do well with books and need to see it to learn
i think this is the 40th video of yours ive watched.. just wanted you to know im getting near expert level on my knowledge haha
It's called the "Editorial We", and it's a valid use.
Hey Jody do you think it is better to do a vertical or a down or is it a preference. I mean will the bead be as strong either way or will the penetration be more shallow in one application than the other
They have the PowerTIG 185 AC/DC TIG welder. Jody reviewed it in a few of his videos.
hi can I use this welding on a boat that is in the water? I am not sure if I will shock my self or cause electrolysison the boat
Love your videos, Thanks so much for making them.
Excellent video. For a woodworking guy who really has no clue about any welding whatsoever but needs to learn about welding aluminum so I can add a 1/2 inch extension to the skeg on my boat's Volvo outdrive so this helped me a lot! First I need to find out what type (number) aluminum the outdrive is made of! then get the rod the extension piece of metal of the same type and the appropriate rod. I might just do it with a blow torch for now, though, since I don't have an welding machine like that and a catalane torch produces pretty good heat. Plus I don't need perfect beads like that since I have to grind it smooth in the end for paint. So anyone with advice for me please do chime in! Thx.
You are right I never seen a ladder welded. I thought of doing it, good thing I never did.
can you tig weld aluminum on AC with Argon?
this was a really helpful video, thanks.
Good guy, proper speech on Al. alloys. Take my plus, my fine Sir =)
Id like to get the book but the price in NZ is US$120 to $140! Even direct from Lincoln it is US$80. $68 postage for a single book!!! Non profit? Love your videos! You have turned me into a gifted amateur!! Are you on Patreon? If not you should be!
I have a few dollars every month spare!!
I was in the same situation, shipping was almost 10x more than the book from the institute. I was able to find one used on abebooks at reasonable price and shipping.
You are the Guy. This is a top notch video. Excellent, Awesome . Where's your books?
More videos with the Everlast PowerTIG 210ext please Jody!
Jody,What machine are you using in this video where you have AC balance and pulse timing control ??? TIA
Great videos, tons of tips.
I found that fascinating.
Are you a teacher, too? I mean like a paid teacher at some institute? Bc if ur not, u should be. U really know ur stuff. I think u'd make some great welders in no time.
There is talk of 2024 and 7075 welding processes now nine years after this was published. I think I saw Jody review that process briefly in one of the fab techs he attended 2019?
i just wish i had your talent and knowledge, i am too old now ....
Keep on using we. it's a good habit for class, and even better in a business arena. in the past I worked for boneheads that had nothing more than a clue of what I might be doing, and yet have the nerve to speak to the customer in terms of "I did this for you or I took care of that for you" We is proper.
i almost weld 1050 and 5754 plate, and 6060/6063 pipes and tubes every day!
it's NEVER too late to start welding :D
a typical ar15 lower is 7075 T6 Al.
great info thank you sir
"We" like you videos!
I was referring to his comment about him n his wife. Good stuff
I like The 'We".
Inorder for him to know that you say "We" he became a second party in this interaction, so tell him or her that tey them self made it "we" once they clicked Play.
If you have some extra cash consider the Everlast PowerTIG 200DX.
when you say "we" I think, " you and I". I dont see where the probllem is.
TIG TIG TIG.... How about all these welding video's for us MIG folk? Not everyone can afford a TIG unit....
I stand by my statement. Your problem not mine.
U can also walk d cup...
you are right , but it is getting harder to see lol ..i am getting pretty good at welding pepsi cans so i guess i am getting better
i prefer to hear "we" not sure why -
00:58 lol get em
мастер
2023 anyone is here 😂