I had a bunch of poles like them sawed froom a power line that runs through our farm and built my front porch. 8x8 post full dem. 2x8 rafters. Spoke date tags went back to 1942
GREAT! I see yu are wearing a respirator or fancy dust mask. That dust will make life difficult for a young man not to mention a "mature" man. Great video work. Lots of good views of what is happening. I think I smell the wood being sawn! love it!
Thank you! I’m just starting to use two cameras and trying to get better at editing. My next video is of planing some of these boards and I think it’s better, we’ll see!
You speculated they don’t use western red cedar for poles anymore, to the contrary, here in north Idaho, there are multiple pole yards that manufacture almost exclusive cedar poles.
Either you forgot to mention it or I missed it but utility poles are not only FREE they will deliver them to you at no cost as well. I cut all of the siding for my entire farm using old itility poles! not a small task house and 5 out buildings!
@@truereality620 I believe that a lot of the utility companies and the municipalities often just have them stacked up in their yards. Costs money to have them ground up or hauled to a landfill. I’m going to investigate next week.
hi there i saw a lot of utility poles . they are the best . poles are graded . they are in the public and hold up high voltage wires , , and do make great looking boards . i show them being sawed from time to time on my channel , been doing a lot of chipping of the slabs , they also make nice mulch in some spots . well done john
Thank you. Yeah, I’ll take all these big ones I can get. I did try a couple standard poles from the city but they were just too treated and of course a lot of nails and staples.
Yes, we did. There were plastic plugs in the bases and when we pulled them out we found the aluminum tubes. They'd been there for a long time and were empty. Another reason why we only use the bases for posts and outdoor type projects!
I don't know what state you are in, but When I was in Texas it was against the law to mill old power poles due to the EPA's problem with creosote. We did it anyway.
Don't like the cantilevered setup on wood mixer mill it torques and the stability sucks, the old ones with seats even worse, guy shots on it makes a clapboard. Dual station bandsaw will cut truer. Had one, stooped hiring the woo d mixer guy.
very entertained to see and happy
I did 1 power pole. With a carbide blade. Made beautiful lumber
I had a bunch of poles like them sawed froom a power line that runs through our farm and built my front porch. 8x8 post full dem. 2x8 rafters. Spoke date tags went back to 1942
Yeah, I’m looking forward to using this stuff. Also looking forward to sawing more of it!
I would love to mill all of these in a shop.
Wouldn't recommend that. The treatment is pretty strong in the lower portion of the poles.
I love that sawmill
I imagine that the injected creosote would raise heck with saw blades with the poles we have in Massachusetts.
GREAT! I see yu are wearing a respirator or fancy dust mask. That dust will make life difficult for a young man not to mention a "mature" man. Great video work. Lots of good views of what is happening. I think I smell the wood being sawn! love it!
I got a load of red cedar poles,some are 38 inch diameter ,nice video.
Thank you! I’m just starting to use two cameras and trying to get better at editing. My next video is of planing some of these boards and I think it’s better, we’ll see!
Moving in a couple weeks to 80 acres of Western Red Cedar in NE WA. Really looking forward to getting started doing some milling!
Sweet! Do you have a mill already?
You speculated they don’t use western red cedar for poles anymore, to the contrary, here in north Idaho, there are multiple pole yards that manufacture almost exclusive cedar poles.
I did not know that!
Nice title. 😂👍🏼
Best money I ever made with my mill was cutting those into tapered lap siding.👍
Either you forgot to mention it or I missed it but utility poles are not only FREE they will deliver them to you at no cost as well. I cut all of the siding for my entire farm using old itility poles! not a small task house and 5 out buildings!
I haven’t even inquired about that yet, but I’m sure going to!
By all means, let us know the process by which to aquire these poles!
@@truereality620 I believe that a lot of the utility companies and the municipalities often just have them stacked up in their yards. Costs money to have them ground up or hauled to a landfill. I’m going to investigate next week.
Did you run any lube when doing the cedar poles?
Just the standard mix of water and Dawn dish soap
hi there i saw a lot of utility poles . they are the best . poles are graded . they are in the public and hold up high voltage wires , , and do make great looking boards . i show them being sawed from time to time on my channel , been doing a lot of chipping of the slabs , they also make nice mulch in some spots . well done john
Thank you. Yeah, I’ll take all these big ones I can get. I did try a couple standard poles from the city but they were just too treated and of course a lot of nails and staples.
did you check how much moister was still in the wood? or do you think because of the age that it could be dry enough to use right away?
Yes I did. The pieces that were above ground were about 8-10% and the but ends that had been buried were nearly 20%.
Have you come across all the small alum tubes all through them with poison skull and cross bone tags where they pump the anti insect stuff in them?
Yes, we did. There were plastic plugs in the bases and when we pulled them out we found the aluminum tubes. They'd been there for a long time and were empty. Another reason why we only use the bases for posts and outdoor type projects!
I think clear means no nots not tight nots !
Yes, it does. Some were clear and the majority were tight knot.
It looks like u saw dow buy prosper Washington
Showing my video
I don't know what state you are in, but When I was in Texas it was against the law to mill old power poles due to the EPA's problem with creosote. We did it anyway.
Don't like the cantilevered setup on wood mixer mill it torques and the stability sucks, the old ones with seats even worse, guy shots on it makes a clapboard. Dual station bandsaw will cut truer. Had one, stooped hiring the woo d mixer guy.