Put nothing but ethanol free gas in all small motors will keep it running better. Great video. Been looking at sawmills and trying to figure out what mill to get.
Steve’s small engine saloon has some great videos on cleaning carbs on these types of engines, they are VERY simple to do, takes me about 10min to drop the bowl and clean the main jet and the little plunger that the float uses to control fuel into the bowl… most times I don’t even remove the carb I just clean those 2 things and the problems all go away. My mill is still buried under 2’ of snow… now I’m itching to get back to it so I can start on my deck 😁👍
@@Jared-Brubaker It is almost easier the first time to pull the carb off completely just to see how it all works BUT it adds another level of frustration dealing with the throttle linkage pro tip Hold an ice cream pail or other small plastic container under the carb as you take it apart to catch any small parts that drop out like the fuel shutoff plunger when you remove the small pin that holds the float in place…
This won’t be out on my channel until April! So it’s our little secret 😂😂😂 You’ll get a kick out of me dancing around the issue in my Saturday Frank videos😂😂😂😂🤣🤣🤣🤣
Lol, we have been teased on Micah’s channel for months with that leaning tree, and I kept wondering why he doesn’t just cut it down and get rid of the risk. Apparently he just wanted a bigger better smokehouse, and what could be better then building the new smokehouse with lumber from the tree that crushed the old one? For what it’s worth, and you might not have the same results, I have found that running ethanol free gas in all my small engines has largely eliminated any carburetor problems. Thankfully my neighbor buys the ethanol free gas in bulk and lets me buy directly from him, so I have extremely convenient access to it.
In process of watching the whole video. I notice you run yours a little different than mine. I keep seeing you measure from the bunk to log top then go crank the mill head down by the scale in back certain amounts. Does your scale tell you how far you are off the bunk and thats how your deciding how thick your boards are? If so which scale is it?
I made one inch marks with a sharpie on the metal beside the magnetic scale that show how far off the bunks I am, I only use it for the slabbing cuts, I find it easier but maybe I’m missing an easier way🤷🏽♂️ thanks for watching Aaron!
Great video spoiler alert should have been the title 😂 I always put a little sea foam in all my small engines it works sometimes lol god bless keep them coming
Try to find ethanol free gas at a gas station. I won't use anything else in my small engines now. You likely have to take your carb apart. Also check if the governor is moving freely and is oiled and there are no obstructions in the gas line.
Go to the airport near you and buy 5 gallons of 100 octane low lead and run it in your sawmill engine. I do this about once a year with all my small engines it will clean all the gunk out of your fuel system DO NOT RUN THIS FUEL IN ANYTHING THAT HAS A CATALYTIC CONVERTER ON IT!
![KFF Singapore Badminton Open 2024 | He/Ren (CHN) vs. Alfian/Ardianto (INA) [7] | F](http://i.ytimg.com/vi/an7AykjOaAA/mqdefault.jpg)
Hey Check out Micah’s RUclips channel, Awesome guy with an awesome channel!
ttps://youtube.com/@McGieHomesteadAdventures
Haven't seen that much popular since I was in high school carpentry class 40 yrs ago
Thank u for doing thus video an the work helping mica get the logs for his new smoke house
Put nothing but ethanol free gas in all small motors will keep it running better.
Great video.
Been looking at sawmills and trying to figure out what mill to get.
That's a boy Jared, teach ole Micah how to run that mill. That way he'll have to get him one lol.
This is a secret!🤫🤫🤫
😂😂😂😂😂😂😂😂
Yup lol, he’s got the work force and the trees! And the money I’m sure😂
Steve’s small engine saloon has some great videos on cleaning carbs on these types of engines, they are VERY simple to do, takes me about 10min to drop the bowl and clean the main jet and the little plunger that the float uses to control fuel into the bowl… most times I don’t even remove the carb I just clean those 2 things and the problems all go away.
My mill is still buried under 2’ of snow… now I’m itching to get back to it so I can start on my deck 😁👍
Good I’m glad told me! I was going to remove the carb but I’ll try that first.
2’ of snow?! Man I’m glad I live in Tennessee!
@@Jared-Brubaker
It is almost easier the first time to pull the carb off completely just to see how it all works BUT it adds another level of frustration dealing with the throttle linkage
pro tip
Hold an ice cream pail or other small plastic container under the carb as you take it apart to catch any small parts that drop out like the fuel shutoff plunger when you remove the small pin that holds the float in place…
Awesome video! Enjoyed seeing you and micah on a video together again. Youns seem like some great guys and down to earth.
This won’t be out on my channel until April! So it’s our little secret 😂😂😂
You’ll get a kick out of me dancing around the issue in my Saturday Frank videos😂😂😂😂🤣🤣🤣🤣
@@McGieHomesteadAdventures 😂
Thanks brother! If plans work out we’ll do another video in couple months.
Good video and job. You did have lots of good help. Hope carb is easy fix. Take care, be safe and well.
Thanks John!
You had some good experienced camera men!!!
I sure did! I’m working on raising a couple of my own but it takes years to get a good camera man lol!
Awesome thank you for the video
Thanks for watching!
Lol, we have been teased on Micah’s channel for months with that leaning tree, and I kept wondering why he doesn’t just cut it down and get rid of the risk. Apparently he just wanted a bigger better smokehouse, and what could be better then building the new smokehouse with lumber from the tree that crushed the old one? For what it’s worth, and you might not have the same results, I have found that running ethanol free gas in all my small engines has largely eliminated any carburetor problems. Thankfully my neighbor buys the ethanol free gas in bulk and lets me buy directly from him, so I have extremely convenient access to it.
Yep he’s a tease lol, But I’d say it was worth the wait 😁 he built one heck of a smokehouse!
Taryl fixes all. On RUclips just fixed a HM model mill with a gummed up carb. He’s funny !
Only people that follow your channel will know that the thing happened!!😂😂😂. The perks of taking my advice and following you!😂😂😂
Not sure what “thing” you’re talking about Micah?
Enjoyed watching, love that rayfleck through the middle of that oak, and what happened to the engine?
Kinda embarrassing but put diesel in it, I felt like such an idiot 🤦♂️
Oh darn, well lesson learned, marked and different color containers from now on🖕
In process of watching the whole video. I notice you run yours a little different than mine. I keep seeing you measure from the bunk to log top then go crank the mill head down by the scale in back certain amounts. Does your scale tell you how far you are off the bunk and thats how your deciding how thick your boards are? If so which scale is it?
I made one inch marks with a sharpie on the metal beside the magnetic scale that show how far off the bunks I am, I only use it for the slabbing cuts, I find it easier but maybe I’m missing an easier way🤷🏽♂️ thanks for watching Aaron!
@@Jared-Brubaker sounds like a good idea!
Great video spoiler alert should have been the title 😂 I always put a little sea foam in all my small engines it works sometimes lol god bless keep them coming
Thanks Bryon! That’s what surprised me, I put sea foam in the last several tanks to avoid this problem but it happened anyway 🤷🏽♂️
Try to find ethanol free gas at a gas station. I won't use anything else in my small engines now. You likely have to take your carb apart. Also check if the governor is moving freely and is oiled and there are no obstructions in the gas line.
Go to the airport near you and buy 5 gallons of 100 octane low lead and run it in your sawmill engine. I do this about once a year with all my small engines it will clean all the gunk out of your fuel system
DO NOT RUN THIS FUEL IN ANYTHING THAT HAS A CATALYTIC CONVERTER ON IT!