Once again a phenomenal video and a golden rule to follow at the end; "If you're borrowing tools and you need it more than once, you need to buy your own." Thanks, Dean!
Hence why you got cheap tools to lend and proper to keep for yourself. If someone need the proper ones, I go with my tools and use then myself. I didnt spent hundreds of Euro on my tools for a "Primitive Pete" to damage them, lend them to someone else or sold.
@darylhudson: so the one click on "See original (translated by Google)" or whatever it says on your device is too much trouble for you? The INTERnet is not English ...
Hi Dean, would you consider doing a tutorial-style "preventative maintenance" video about which things we should be cleaning, greasing, lubing or whatever to get the most out of our tools? Thanks!
Thank you Dean for your brilliant videos, I was given a Makita 8391D drill which was noisy and smelt of burning. Following watching you it gave me the confidence to fit a new motor to it and now it runs nicely, older machine but does the job.
New follower, greatr instructional videos and very informative and of course from a NI man, lol. I hate lending tools and agree totally with your ending comment, "If you're borrowing tools and you need it more than once, you need to buy your own." . Well said Dean.
Hadn't seen the inside of that Metabo either, but that one is a true nightmare design ... Also the CB440 is CB448 these days, still the same brushes just a different number. Not even gonna comment on the Dewalts anymore, everything electric is a one piece part these days and almost always exceeds half of the machines worth. Thanks for another great vid!
I just admire your mindset to use 2nd hand parts on those tools. Keeping the costs down for your customer but also the impact on the environment is much lower.... less production, less polution and less landfill. Just top Dean ! About lending my tools... after learning the hard way... never again !!
I enjoy the analysis Dean does so quickly. That basic 20v Makita Circular saw wasn't powerful enough to cut through multiple 8x4 foot sheets. You need a solid mains unit for that. Or take longer about it, cutting each sheet individually.
I agree 100% with your last comment about not lending tools. My father was an engineer and said the same. "Your tools are yours and nobody else's. If you lend a tool and it is lost, or worse still is returned broken you lose not only your tool but also trust and respect for the person who borrowed it."
If i borrowed a tool i'd be sure to return it in the same if not better condition then when i borrowed it but a lot of people don't have that mentality. But i agree with the if you need it more than once then buy your own.
Normally when someone wants to borrow a tool, they obviously don't have one themselves, which generally means they dont know how to use that tool, coupled with "well its not my tool its cost me nothing" factor they tend to abuse them ! Anyone asks me to borrow a tool I always tell them its a golden rule NEVER to lend tools to anyone, most builders know this rule through bitter personal experience.
Hiya Dean, Just wondered if you had any experience with the 36v double 18v sds Makitas? DHR263 (brushed) or DHR280 (Brushless) Thoughts on them as a tool? Thanks, thumbs up.
I have had the 18v counterpart brushless and it's really robust and like Dean said in the past it can work with low fairly grease without too much issues compared to others. Gearbox and motor are great in my opinion so if the 36v is as fantastic and reliable as the 18v ones you should be okay
Yes, both are very good machines and the gearbox gives very little trouble. Quite robust actually. But I would go with the brushless over the brushed machine as the brushless can handle a lot more work.
Nice video Dean !! Fascinated by you`re knowledge and work ethic. Just wonder if you repair tools that been used for asbestos, if so how do you do it ?
If a machine is unrepairable or uneconomical to repair, they should be forced to label it as a "Disposable Non professional tool" in big legible letters on all their packaging, all their advertising and anywhere its sold, under the trade descriptions act ! These are just cheap disposable goods masquerading as "professional" machines. a pro machine is supposed to be rugged and serviceable, its cheap DIY tools which you throw in the bin when they go wrong, because the cost of repair is more than the machine is worth.
@@rvdb1863 There is no reason why our own ELECTED officials couldn't make the same regulations or even surpass them. The only reason they don't is because the majority of them have been promised golden handshakes if they sell their people to the EU. I don't think some words printed on packaging or preventing individuals from trading is worth my freedom and independence, all I want is the correct application of Law with no strings attached.
I've been watching a few of your videos and had a quick question I notice when you use your drill and your bit driver that you use in this video have dimples on the side of it I'm assuming these are interchangeable bits that go into the head of the screwdriver or can go into the drill if you want. If you don't mind me asking what is the name of these particular ones
Looking at that 1st Matebo grinder. If motors like that one are still good, for example cut off the junk parts and get it to spin in a working chassis, they may still be valuable to sell. I've used junk power tools to build RC cars many times in the past, I'm sure people still do it. A cheap high speed brushless motor like that is easy to build around, although understandable a very small market.
Hi Dean, Hoping you can help me some more . I have an AEG sds drill. Its knocking on at bit, like myself. I dont want to buy a new one . truthfully I probably wont get the use off it. I need a switch for the drill but have no idea where to go for it. Any ideas??
Excellent work. That DeWalt silicone gun is pretty much a no-buy in Oz, fail after 6 months, 6 month turnaround on warranty repair (2 years in Oz). DeWalt wants to sell them, but not provide parts.
Must never buy a Metabo product if that angle grinder is an example of their repairability. The Makita circular saw should be described as stupid Customer User Not Technical. The acronym of the last four words is quite apt in this case. *Thank you* for the Masterclass Repair Video Dean. 👍
All my tools are metabo,drills,circsaw,grinders etc been running for years now never had any issues with them and they have awesome battery platform.Just cuz one tool is bad doesn't mean they all are.
@@AlexKall It would be for me if reliability was an issue, but in my 15 years in construction, I don't think I've broken more than 10 power tools in total.
You know your stuff and no doubt you'll know crap tools from good tools. I am looking for to buy a drill set, what would you recommend. I was about to order the dewalt dws780 until i saw your video and took your advice and ordered a makita instead. Thanks. In advance. 👍
Be sure to pick one with an aluminum gearbox like the ddf 484 The second gear ring grabs onto aluminum instead of a plastic part, much more robust. Have a nice day 😊
If Ive lived in Ireland, I would send you my Makita HP001 XGT tool for review and teardown, but since we are sea and quite the land apart it would cost us both sending it.
Hey Dan, how you doin ? Look man I enjoy your vids.. everytime I see you unscrewing things and talking about armatures I see that thing on your wrist... casio wr or some sorts.. ?. If you see my comment reply to me, I'll hook you up, limited edition seiko 5 lumibrite my dude. Preowned ofcorse it's taken a beating it still looks brand new.
Why would a brushed saw need a controller, there is no speed adjustment and obviously no overload protection. My guess is that a cheap switch can be used?
I know a 6' 3" monster of joiner from llanberis, North Wales (hello Aaron, if you're reading), who snaps every single silicone gun within the hour. In all honesty, his grip is lethal and he should have been a strangler by trade. That silicone gun would get squoze to death within minutes.
But its time consuming. If you yourself got the tools and knowledge or have a friend who is good at this then sure. Youd also might need their diagram what goes where. Repair shops want it fix asap. Unless its a PC repair shops and they fix a graphics card, then they will dabble in thay circutry magic.
@@michaelfairchild might be worth a go. Often they are easy fixes and the same fault reoccurs, so each time you get that particular controller, you fix it faster. Perhaps one of the RUclips electronics fix channels might like a go at it such as Buy it Fix it.
@@UnCoolDad Sure it is, but mostly for people who either do it like you stated for content on YT or, if youre skilled on fixing it yourself. Most of the components on the PCB will be items you can buy everywhere. Unless its some cheap chinese part that doesnt have any markers and you need to guess the parameters of it.
@@michaelfairchild Most often it is a simple component which goes - like a capacitor, diode, or a bridge rectifier. I'd also say that many faults are commonly in the same place for the same board, so if someone can take all the faulty controllers, refurbish them, and make them available as second hand, it could be worthwhile - especially if they cost 250 euro!
Whoever was operating that Makita impact wanted an early finish but they had to finish breaking out a load of concrete or brickwork so he took the handle off and disconnected the switch and when he's stuck it back together he's squashed the plug against the pins and bent them then he's gone back to his boss and said this machine has stopped working 😂😂😂
That Dewalt silicone gun!!!! Dewalt is fast becoming my least favourite big brand tool. Just like mobile phones now legally having to use the same charger socket so that less perfectly usable equipment is going in the bin, we need to have laws put in place to stop electronics companies from grouping items together like this and then charging stupidly high prices for a replacement! There is absolutely no valid reason for having everything as one piece like this. There's even less reason for companies not to be selling replacement parts to keep tools running properly for longer. If anything, I'm hoping that practices like this are hurting brand loyalty and customers are switching to brands that have a better spare parts supply system for their power tools.
Hard to believe that DeWalt continues to get away with their price / quality model - like paying Festool prices for Harbor Freight back in the day. Crikey.
people that borrow tools don't respect them because they haven't paid for them, and if you do borrow tools and you need it more than once you need to buy your own.
1:00 I really like how that Metabo grinder battery turns side to side like that. That's a good idea for sure. I wish my DeWalt (dcg413)grinder did that, but I guess changing head position is as close as I'm getting with that one. I'm pretty sure you can turn the head any direction on it but never tried & not 110% sure.🛠️🔩🔧🗜️🦺👍🏻👌🏻 ✊🏻🇺🇸🦅🇺🇸✊🏻
41:24 cutting 4 sheets of plywood at once to save 1 minute, but blowing out the edges and the tool in the process.😂😂😂 people are stupid. The shop owner should've give the customer a handsaw instead 😂🪚
He probably would have done 2 or max 3 sheets at a time, but this is not the saw for going against the grain on ply with 2/3 sheets - the DHS680 is the beast for that with a 4amp battery which has the most powerful cells in the 18v Makita lineup.
Tools fixed in this video:
0:08 Metabo (possibly) WB18LT 11-125 Grinder | Fault: Doesnt start
9:06 Makita HR5212C Hammer | Fault: Doesnt start
16:36 Makita DTD153 Impact | Fault: Jammed/High pitch noise when pushing the trigger
25:09 DeWalt DCE580 Silicone gun | Fault: Doesnt start
31:47 Makita DHP458 Drill | Fault: Jammed trigger
40:38 Makita DSS611 Circular Saw | Fault: Tool lent to an ape/Overloaded when in use/Smell of burnt electronics
Golly gee Michael, thanks for all that work! 🙄
Once again a phenomenal video and a golden rule to follow at the end; "If you're borrowing tools and you need it more than once, you need to buy your own." Thanks, Dean!
Here's a new rule if you borrow it and you break it you pay for it to be repaired or buy a new one. Get the agreement on video/audio as proof.
Hence why you got cheap tools to lend and proper to keep for yourself. If someone need the proper ones, I go with my tools and use then myself. I didnt spent hundreds of Euro on my tools for a "Primitive Pete" to damage them, lend them to someone else or sold.
İnsanları beklememek için alet alırım ödünç almak için değil😊😊😊
@@alihancer8037 English
@darylhudson: so the one click on "See original (translated by Google)" or whatever it says on your device is too much trouble for you? The INTERnet is not English ...
Hi Dean, would you consider doing a tutorial-style "preventative maintenance" video about which things we should be cleaning, greasing, lubing or whatever to get the most out of our tools? Thanks!
Always so enjoyable to watch, Thanks Dean!!!!
Glad you enjoyed it
Thank you Dean for your brilliant videos, I was given a Makita 8391D drill which was noisy and smelt of burning. Following watching you it gave me the confidence to fit a new motor to it and now it runs nicely, older machine but does the job.
New follower, greatr instructional videos and very informative and of course from a NI man, lol. I hate lending tools and agree totally with your ending comment, "If you're borrowing tools and you need it more than once, you need to buy your own." . Well said Dean.
Keep it up! Love the 30+ min vids
Thanks! Will do!
Agreed!
I love watching you fix the power tools I got to fix my own
I love you using secondhand bits in your repairs. 😊
This is why RUclips was invented, inventoried know how and genuine teachings
Hadn't seen the inside of that Metabo either, but that one is a true nightmare design ...
Also the CB440 is CB448 these days, still the same brushes just a different number.
Not even gonna comment on the Dewalts anymore, everything electric is a one piece part these days and almost always exceeds half of the machines worth.
Thanks for another great vid!
Regarding lending tools, it is better to give than to lend and it costs the same! Keep up the good work Dean.
In a men eyes, this guy is A legend already
I just admire your mindset to use 2nd hand parts on those tools. Keeping the costs down for your customer but also the impact on the environment is much lower.... less production, less polution and less landfill. Just top Dean !
About lending my tools... after learning the hard way... never again !!
Think you kind no your job well wish we had good people like your self like watching you work so clever😊
Nice work Dean, thanks for the tips.
Your a magician or wizard with broken tools. Amazing
I enjoy the analysis Dean does so quickly. That basic 20v Makita Circular saw wasn't powerful enough to cut through multiple 8x4 foot sheets. You need a solid mains unit for that. Or take longer about it, cutting each sheet individually.
High tier cordless tools will push through. That one is just a cheap and cheerful small saw.
Thanks Dean always worth watching
I agree 100% with your last comment about not lending tools.
My father was an engineer and said the same.
"Your tools are yours and nobody else's.
If you lend a tool and it is lost, or worse still is returned broken you lose not only your tool but also trust and respect for the person who borrowed it."
And the Attitude of some people is it's not mine so they don't care.
Worst is, if they lend it to someone else and forget who or worst of it all - sold them.
@@michaelfairchild double trouble
If i borrowed a tool i'd be sure to return it in the same if not better condition then when i borrowed it but a lot of people don't have that mentality. But i agree with the if you need it more than once then buy your own.
Normally when someone wants to borrow a tool, they obviously don't have one themselves, which generally means they dont know how to use that tool, coupled with "well its not my tool its cost me nothing" factor they tend to abuse them ! Anyone asks me to borrow a tool I always tell them its a golden rule NEVER to lend tools to anyone, most builders know this rule through bitter personal experience.
Yep, never lend tools out, but I do it all the time. I'll never learn. Nice job Dean.
Another great video Dean.
Love your videos! Legend.
For silicon gun, blue wire is pinched?
Hi Dean - thought I saw pinched blue wire over top of control board????
Hiya Dean,
Just wondered if you had any experience with the 36v double 18v sds Makitas? DHR263 (brushed) or DHR280 (Brushless)
Thoughts on them as a tool?
Thanks, thumbs up.
I have had the 18v counterpart brushless and it's really robust and like Dean said in the past it can work with low fairly grease without too much issues compared to others. Gearbox and motor are great in my opinion so if the 36v is as fantastic and reliable as the 18v ones you should be okay
Yes, both are very good machines and the gearbox gives very little trouble. Quite robust actually.
But I would go with the brushless over the brushed machine as the brushless can handle a lot more work.
@@deandohertygreaser Thank you very much for your thoughts - I will take this advice when looking for one.
Cheers!
14:01 Is it possible that theconnector vibrated off the prongs?
Nice video Dean !! Fascinated by you`re knowledge and work ethic. Just wonder if you repair tools that been used for asbestos, if so how do you do it ?
No i wouldn't get any tools specifically for that.
But if I did, You wouldn't want to know, and I wouldn't post how I would prep them here.
If a machine is unrepairable or uneconomical to repair, they should be forced to label it as a "Disposable Non professional tool" in big legible letters on all their packaging, all their advertising and anywhere its sold, under the trade descriptions act ! These are just cheap disposable goods masquerading as "professional" machines. a pro machine is supposed to be rugged and serviceable, its cheap DIY tools which you throw in the bin when they go wrong, because the cost of repair is more than the machine is worth.
I think within the EU this is not allowed anymore. Disposable is the right word indeed. Now you see why. EU regulation isnt all bad
@@rvdb1863 There is no reason why our own ELECTED officials couldn't make the same regulations or even surpass them.
The only reason they don't is because the majority of them have been promised golden handshakes if they sell their people to the EU.
I don't think some words printed on packaging or preventing individuals from trading is worth my freedom and independence, all I want is the correct application of Law with no strings attached.
I've been watching a few of your videos and had a quick question I notice when you use your drill and your bit driver that you use in this video have dimples on the side of it I'm assuming these are interchangeable bits that go into the head of the screwdriver or can go into the drill if you want. If you don't mind me asking what is the name of these particular ones
they are wiha system 6 bit set.
Excelent Work Dean. 👍👍👍
Dewalt, professional tool, you should be ashamed of that.
about metabo grinder - seen 2 whit same stuck motor - design flaw/ material flaw?
Just wondering, could you (hack) add a fuse to that circular saw just like other Makita/Bosch tools have from stock to prevent cooking the controller?
No reason why not. That's acutaly a pretty good idea. Shame makita didn't think of that.
Looking at that 1st Matebo grinder.
If motors like that one are still good, for example cut off the junk parts and get it to spin in a working chassis, they may still be valuable to sell.
I've used junk power tools to build RC cars many times in the past, I'm sure people still do it. A cheap high speed brushless motor like that is easy to build around, although understandable a very small market.
Hi Dean,
Hoping you can help me some more . I have an AEG sds drill. Its knocking on at bit, like myself. I dont want to buy a new one . truthfully I probably wont get the use off it. I need a switch for the drill but have no idea where to go for it. Any ideas??
Excellent work. That DeWalt silicone gun is pretty much a no-buy in Oz, fail after 6 months, 6 month turnaround on warranty repair (2 years in Oz). DeWalt wants to sell them, but not provide parts.
did you check the voltage at the motor terminal on a dewalt sausage gun?
Dean could you put an 40 amp auto fuse where you put that connector ?
Must never buy a Metabo product if that angle grinder is an example of their repairability.
The Makita circular saw should be described as stupid Customer User Not Technical. The acronym of the last four words is quite apt in this case.
*Thank you* for the Masterclass Repair Video Dean. 👍
I agree!! I think that customer should pay for the repair because of how stupid they were.
All my tools are metabo,drills,circsaw,grinders etc been running for years now never had any issues with them and they have awesome battery platform.Just cuz one tool is bad doesn't mean they all are.
@@bratgrbic847 People here seems to think that tool reparability is the only important aspect of a tool.
@@MrArcticPOWER not the only but it is definitely high on the list.
@@AlexKall It would be for me if reliability was an issue, but in my 15 years in construction, I don't think I've broken more than 10 power tools in total.
Vibration could have loosened that switch connector on that hammerd drill Dean.
30:10 what if the main switch isn't working?
You know your stuff and no doubt you'll know crap tools from good tools. I am looking for to buy a drill set, what would you recommend. I was about to order the dewalt dws780 until i saw your video and took your advice and ordered a makita instead. Thanks. In advance. 👍
Be sure to pick one with an aluminum gearbox like the ddf 484
The second gear ring grabs onto aluminum instead of a plastic part, much more robust.
Have a nice day 😊
@@Matt-ns2ty brilliant m8 thanks again. 👍
@@mstrwul1 np happy to help 👍
What grease do you use?
i do this for a living. around 2500 tools annually. it's cool to watch my job on youtube :D
wiha another amazing video 😁
If Ive lived in Ireland, I would send you my Makita HP001 XGT tool for review and teardown, but since we are sea and quite the land apart it would cost us both sending it.
That lil' Makita saw is one of my favorite tools. That a person would use a battery saw to rip multiple sheets is idiotic
9.49 seconds in...happy days!😂😂
Hey Dan, how you doin ? Look man I enjoy your vids.. everytime I see you unscrewing things and talking about armatures I see that thing on your wrist... casio wr or some sorts.. ?. If you see my comment reply to me, I'll hook you up, limited edition seiko 5 lumibrite my dude. Preowned ofcorse it's taken a beating it still looks brand new.
On dewalt gun I saw a crushed blue wire by control board
Why would a brushed saw need a controller, there is no speed adjustment and obviously no overload protection. My guess is that a cheap switch can be used?
I know a 6' 3" monster of joiner from llanberis, North Wales (hello Aaron, if you're reading), who snaps every single silicone gun within the hour. In all honesty, his grip is lethal and he should have been a strangler by trade. That silicone gun would get squoze to death within minutes.
Tell him to buy guns for chemical anchor
@@deandohertygreaser Hilti Hit? Nah, Dean, he'd kill 'em...
I watched a co worker try and break a screw off with the battery of his drill. And people wonder why tools dont last.
Wonder if someone who does component level electronics repair can fix it. Could well just be a blown capacitor. At €250 - worth a go if fixable.
But its time consuming. If you yourself got the tools and knowledge or have a friend who is good at this then sure. Youd also might need their diagram what goes where.
Repair shops want it fix asap. Unless its a PC repair shops and they fix a graphics card, then they will dabble in thay circutry magic.
@@michaelfairchild might be worth a go. Often they are easy fixes and the same fault reoccurs, so each time you get that particular controller, you fix it faster. Perhaps one of the RUclips electronics fix channels might like a go at it such as Buy it Fix it.
@@michaelfairchild Buy it Fix It here on YT has fixed a bunch of Milwaukee tools at the component level.
@@UnCoolDad Sure it is, but mostly for people who either do it like you stated for content on YT or, if youre skilled on fixing it yourself. Most of the components on the PCB will be items you can buy everywhere. Unless its some cheap chinese part that doesnt have any markers and you need to guess the parameters of it.
@@michaelfairchild Most often it is a simple component which goes - like a capacitor, diode, or a bridge rectifier. I'd also say that many faults are commonly in the same place for the same board, so if someone can take all the faulty controllers, refurbish them, and make them available as second hand, it could be worthwhile - especially if they cost 250 euro!
Whoever was operating that Makita impact wanted an early finish but they had to finish breaking out a load of concrete or brickwork so he took the handle off and disconnected the switch and when he's stuck it back together he's squashed the plug against the pins and bent them then he's gone back to his boss and said this machine has stopped working 😂😂😂
Ha, my guess was a hire shop. Customer left it back after finishing his job saying it never worked. 😆
Same with all tool companies they are all doing the same seen it many many times controller too expensive they all should be closed down
That Dewalt silicone gun!!!! Dewalt is fast becoming my least favourite big brand tool. Just like mobile phones now legally having to use the same charger socket so that less perfectly usable equipment is going in the bin, we need to have laws put in place to stop electronics companies from grouping items together like this and then charging stupidly high prices for a replacement! There is absolutely no valid reason for having everything as one piece like this. There's even less reason for companies not to be selling replacement parts to keep tools running properly for longer. If anything, I'm hoping that practices like this are hurting brand loyalty and customers are switching to brands that have a better spare parts supply system for their power tools.
Hard to believe that DeWalt continues to get away with their price / quality model - like paying Festool prices for Harbor Freight back in the day. Crikey.
Never a lender or borrower be.
“Forcing it is not fixing it!”
Hey mate how are you today
people that borrow tools don't respect them because they haven't paid for them, and if you do borrow tools and you need it more than once you need to buy your own.
1:00 I really like how that Metabo grinder battery turns side to side like that. That's a good idea for sure. I wish my DeWalt (dcg413)grinder did that, but I guess changing head position is as close as I'm getting with that one. I'm pretty sure you can turn the head any direction on it but never tried & not 110% sure.🛠️🔩🔧🗜️🦺👍🏻👌🏻
✊🏻🇺🇸🦅🇺🇸✊🏻
it seems the manufactures are making it more and more hard to repair expensive tradesman tools
No LTX Metabo...all clear to me.
Take the saw back to Makita under warranty 😅
Metabo seems to be even worse than Milwaukee, really disappointing.
I think it depends upon where the Metabo is made; the German equipment still seems good
Comparing any powertool to a Milwaukee is an Ultimate Insult.
ชอบ
Shame on you Dewalt. Looked like a brand new gun.
I only lend people tools I don’t care too much about lol
That Metabo grinder is like apple products, designed to be unfixable...
I have about 20 metabo tools and all of them are fixable so far (7 years).
Might be a one off model, hopefully it's not a trend.
What a horrible design on the Metabo.
Terrible design from metabo…..
41:24 cutting 4 sheets of plywood at once to save 1 minute, but blowing out the edges and the tool in the process.😂😂😂 people are stupid. The shop owner should've give the customer a handsaw instead 😂🪚
They will the next time.
He probably would have done 2 or max 3 sheets at a time, but this is not the saw for going against the grain on ply with 2/3 sheets - the DHS680 is the beast for that with a 4amp battery which has the most powerful cells in the 18v Makita lineup.