In the Doghouse | '63 Fender AA763 Deluxe Pt 2
HTML-код
- Опубликовано: 16 май 2024
- Another long video is mostly real time. To recap, I recapped it.
- - - - - - - - - - - - - - - - -
These are things I get asked about a lot :
Amp Tech Gear Used :
Hakko FX-951 soldering station
Weller SPG 80L soldering iron (chassis work)
Rigol DS1054Z digital oscilloscope
Thsinde 18B+ digital multimeters
Kester 60/40 solder
Techspray #4 No-Clean Desoldering Braid
Below are things that make this channel possible that people don’t usually think about. If any of these companies want to send me new and wonderful toys, I’m open to that. I can’t take free stuff when it comes to the amps I review, etc, but for the stuff below, bribe away!
Microphones/Audio Equipment :
Guitar Amps : Royer R-10 Hot Rod and/or Shure SM57 (noted in videos)
Voiceover Bench : sE Audio sE8 (small diaphragm condenser)
Voiceover Streaming : Shure SM57 with shockmount and windscreen
Voiceover Mic Arms : Elgato Wave Mic arms
Guitar Mic Stand : Gator Frameworks short weighted base stand with boom
Mic Cables and Guitar Cables : Mogami/Neutrik
Mic pre : MOTU M2
DAW : Logic Pro II on MacBook Pro 16 running Sonoma 14.5
Plugins : No effects other than level matching/normalization unless a recording
specifically has reverb etc added in post (rare, various Waves plugins)
Monitors : Yamaha HS7s
Monitor Stands : Gator Frameworks Desktop Clamp-On Stands
Monitor Isolation Mounts : IsoAcoustics Iso-Puck Minis
Headphones : Beyerdynamic DT 770 Pro (main)
Headphones : Sony MDR-7506 (alternate)
Video Equipment :
Camera : Sony ZVE-10 with SmallRig Cage (main)
Lens : Sigma f2.8 18-50mm (main)
Lens : Sony ZVE10 kit lens (rarely used)
B Camera : Apple iPhone 13 Pro (rarely used)
Tripod : SmallRig 71” with SmallRig Fluid Video Head
Streaming Mount : Elgato Master Mount S with SmallRig Ballhead
Bench Light : SmallRig RC 120D
Bench Light Diffusor : SmallRig Lantern Softbox
Bench C-Stands (light and overhead camera) : Neewer Pro SS Heavy Duty
Streaming Light : SmallRig RC 120B
Streaming Diffusor : SmallRig Parabolic Softbox
Streaming Light Mount : SmallRig 148CM Wall Mount Boom with Triangle Base
Various Other Lights : Neewer LED Panels with Neewer Softboxes
Video Software :
Davinci Resolve 19
Phantom LUTs
Paul Leeming LUTs
Adobe Illustrator 28
Adobe Photoshop 25
Ecamm Live (streaming software) Видеоклипы
“When I built pedals”. I build pedals. I have seen my future. I hope my sense of humor is this strong when the time comes
I hate that! Always having to weed out the telecasters from my collection is such a pain - no idea where they’re getting in from. 😂
the blue dog barks at midnight
Love the long format videos. Learning a lot seeing the whole process - considering digging into RoRobinette's site and building somethign simple as a fun project but not going down the kit route!
Got a couple of solid-state amps off a friend that are not working so going to do some practical fault diagnoasis learning on them too.
A note on screw size: The sheet metal screws in these Fenders are not #8 but #7, specifically #7-19 x 5/16" Type B (which means blunt tip). The major diameter of a #7 is 0.151". #8 is 0.164" and will enlarge the hole. I have found that a #8 will work in a stripped #7 hole; there's usually no need to go to #10.
The replacement screws that Amplified Parts sells are #8, incidentally. This can bite you if you're just replacing a lost screw. The correct #7 screw is hard to find in small quantities, but McMaster-Carr has them, although in slightly longer 3/8" length and in stainless only. They have the #8 in the correct 5/16" length (#8-18 x 5/16") in zinc.
I like your machine screw with nylock nut for the OT. Classy.
Thanks Bruce. I didn’t know that, as everyone sells #8s for this purpose, and they obviously aren’t #6s.
That said, I’ve tried new #8s in stripped original holes and they didn’t grab - must depend on how stripped the holes are.
But yeah, my preference is a 6-32 machine screw, washer, and nylock nut. Doesn’t enlarge any existing hole and provides a strong reliable connection.
The blue dog barked at midnight!
barks. We still haven't tracked down the origin of the phrase.
@3:42 thankful I'm not alone in doing that 😋
"The dude abides, man..."
I had an electrician upgrade the wiring in my old house. When he got thru, every screw head slot was straight up and down. Nice touch.
Actually, I think the correct code phrase is "The red dog barks at midnight."
Lyle, I love these long form videos. You pick up an absolute treasure trove of details that a short quick video could never include. Brilliant mate keep them coming if you're able.
Thank you so much for sharing this valuable wisdom and experience 👍🙂
Man do I love me a telecaster. My guy doing things THE RIGHT WAY
The long-form is outstanding. I commend you, Lyle. Watching you work is oddly relaxing, and educational. Witnessing your process is reassuring of your integrity as a reputable tech. It also demonstrates the actual labor involved to perform these tasks. When the intangibles are factored in. The rate of the restoration/repair is ironclad. Keep them coming, Lyle. I believe your audience is eager to watch. Enjoy the weekend.
Lyle thanks for specifically stating which solder you use and your experiences, bad solder is like a bad bottle of whiskey, i spent an arm and a leg on it and now i have to drink the damn thing
Those wire leads with no slack in them are perfect fodder for "Shorts!" Except that I hate "Shorts"......
There is just something very classy about those new filter caps all lined up. These videos are great! The blue dog barks at midnight!
I love these long form videos! This is like watching a great chef cook Thanksgiving dinner!
I said to my buddy the other day that I'm glad Jimi or Page never used traynors, lol.
He said, "Did you know that Lennon used -"
And I said, "Would you be quiet?!" Lol
Yeah, there's a few yba-3 head & cabs for sale that are pretty reasonable for what you get.
Bad ass! The dude abides
I like the break up in the video and stopping after the doghouse. Thanks for the upload Lyle.
Definitely appreciate the detail format, including materials and tools details.
On editing footage from a 3 camera shoot - consider using a small video switcher with 2 or 3 cameras (one ceiling mounted would be nice) connected to it and just push a button to achieve your multi-camera shoot. Less editing in the end.
Rather enjoyed the longer video also. Great job as always 😎 dude
Goddamn, I love the long format vids.
Thank you, you bloody deadset legend!
finally got my local tech rebuilding my old Fender Pro AA763 back to spec, rather than a museum piece restoration. I got it as a butchered "boogied" 100 watt rocket and used it for decades doing all the regular upkeep stuff myself. Failing eyesight makes that no longer a good idea. For such a heavily gigged amp, it's cosmetically in great condition. I am looking forward to getting it back soon
It’s amazing how life turns out when you work for good portion of your life. You go!
Truly enjoying the long videos! I love your attention to detail! Great work!
Jimi did play late CBS fenders, I knew his late stage manager Eric Barret who stayed in Coatbridge Scotland and had the chance to play Jimi's Black flying V which he brought up to Scotland to his parents house when he passed. Different days Lyle and it seems such a long time ago.
Just got in from doing yard work and sitting here with a cup of tea watching the master at work . . . as always, a great job Lyle 😎👍
Saved this for my Friday night's viewing, enjoying your immaculate work as ever, my preferred alcohol is a Campbeltown single malt which I'm savouring as I watch you do this.
First, you used the word, "anathema." I love that word. Second, you spoke about not wearing shorts and being cognizant of your eyes when soldering. I would like to add to be careful if you solder with long sleeves. I generally don't, but the last time I did, I managed to transfer a solder splash into my eye from my sleeve, using my sleeve to wipe my face shortly after I was done wiring a guitar. It sucked and I had to go to the doctor for them to fish it out. No Fun! be safe and thank you Lyle for all the videos. I like the long ones too.
Just what i was looking for! Great review!!
Well, please note this is an actual 1963 Fender Deluxe, not one of the modern reissues.
I love my Engineer solder sucker! I've also learned why the typical ones sold in the US have the long plunger guard on them: popped myself in the forehead with the Engineer a few times when working up close to get a good view 😂
Love this type of video. Keep ‘em coming Mr. Lyle lol
Fresh cup of tea and ready for a long Psionic video. Happy Friday sir
Great video and learned alot of things that are very useful
Really appreciate the long format. Didn't get the "the blue dog barks at midnight". I'm sure it's on my end. I think different camera angles is a great idea. I did the same and purchased a Canon R6 and a Ninja V as a monitor and recorder. Bought a couple 1TB drives and I can edit video without moving the files to the computer. Saves a lot of time and space. Thanks again.
"The blue dog barks at midnight" is apparently a code phrase that sounds like a code. Google really isn't any help over its origin.
@8:42 Cutting mats are a great idea, however they are a bit busy-looking for my eyes and have a tendency to camouflage some parts and pieces.
I've always used the surface mats used for drafting tables instead. They are self-healing just like most cutting mats. (a little better IMO) And withstand burning much better that regular cutting mats. They are a 5-ply vinyl in a solid color pastel gray or green. VYCO or Borco are the material trade names.
I buy it by the roll and cut my own to my needs.
It's likely more expensive that regular cutting mats, I believe, but worth it. (again, IMO)
Since I rarely use solder, I used silver solder on my Mojotone kit amps. I like the idea of the solder being more conductive.
I dig the long format. More opportunity to -steal- appropriate tricks of the trade.
Outstanding Video !
I encourage you to continue in this longer format when you can. Besides the larnin' to be had topically, there is often good wisdom to be gleaned when you stray a bit. Great Stuff.
Regarding "The blue dog barks at midnight"---if all the animals along the equator were capable of flattery, then Thanksgiving & Halloween would fall on the same day.
You don't have to imagine what an amplifier interior might look like in "Blade Runner" or some other Ridley Scott movie ---- just examine a Mesa Boogie amplifier! PS, watch out for Alien xenomorphs!
don't forget that hot glue attracts moisture and will induce rust to whatever it's touching. one of my big old peavey tube amps died because of hotsnot glue on one of the main signal cap's leads.
In decades of electronics work I have never found ordinary hot glue to be corrosive. What you're referring to is likely Sony Bond or something similar, a glue that was commonly used in ellectronics manufacturing to hold capacitors and other components to the board prior to wave soldering. That glue starts out tan-colored and rubbery but eventually morphs into something resembling burned sugar, becoming electrically conductive; and it will indeed corrode anything it touches. It eats right through component leads and circuit-board foils, and the corrosion can climb up the leads into the body of a diode, resistor or transistor and make it noisy and intermittent. The more heat that the glue is subjected to by the surrounding components, the more damage it will do. I have spent countless hours scraping it off of PC boards with a dental pick and replacing corroded components.
Awesome 👍😎
I love the sound of the ocean that why I use 1 watt carbon compete in my power supply (sarcasm ) .
@3:43 Same thing I say with great repetition. To iterate, I reiterate it.
14:30 still better than the panny-boi!
That was an excellent video. It's extremely helpful to see this done in real time. I wasn't sure what cap to put in the bias but now I have your great information. Same with the dog house resistors. The whole video was great. I watched parts 2 and 3 but I didn't see a part one. Do you buy all your caps and resistors from one place or do you have to pick and choose from different sources? THE BLUE DOG BARKES AT MIDNIGHT. I watched every informative second. Great Work! The video also looks very good and the audio is also very good! I will be doing all this to my Deluxe Reverb and you have shown me some things I never thought about doing.
Link to part 1 in the description. I get most things from Mouser, CE, and Tube Depot.
Thanks!
I find it odd that Fender made a non-reverb version of several of their amps with vibrato (tremolo). To me reverb is a more "necessary" feature for an amp. Of course the Vibro Champ, never got reverb until very recently. Is the blue dog comment just to see who watched the entire video? I always do.
Solder domes? The dude abides...
Dental pick = sheet metal scribe.
Why are the 30 Mfd bigger than the 47? I guess it has has to do with some sort of ratios regarding surface areas of the construction materials I guess but it’s still baffling me to me.
For the amount of time to restore old bus wires, might have just removed with the caps and used new bus wire, no?…
And if I had, others would ask “why didn’t you just keep the old wire?”
I showed the proper way to use the old wire. In other videos I’ve put in new bus wire. Which can be quicker.
Lyle, do you prefer the regular rosin core Kester, or the "No-Clean"? Also, what percentage flux do you like? 1.1%, 2.2%, or 3.3%? I've been using Kester 44 series 60/40 in the .031" diameter and 3.3% flux, but it seems to leave a LOT of flux residue behind, especially when I'm soldering to PCB's.
Mahalo Lyle! Heat won't affect nyloc?
Is there a reason not to use the foam in the lid of the doghouse to hold the caps?
It doesn’t make contact with the new smaller diameter caps.
re your comments about legends and legendary sounds, ruclips.net/user/AskZac 's recent video about some of the big session players of the 60s: not only did they use studio-supplied amps ('oh, an Ampeg? OK'), they often rented guitars if they were out of town. All brand new.
But, why blue? Why does it bark? So many questions for wannabe amp techs.
Hey in another video you mentioned you knew of some good techs in British Columbia? Can you share a name? I've got a Garnet that need attention
Sorry, both guys I was thinking of are actually in Nova Scotia.
@PsionicAudio oh dang, that's a long ways from me!
@@j.d.saccociates3313, The next time Lyle does a question and answer streaming session, ask the group and somebody will probably come up with a local tech for you.
@@goodun2974 I missed the last one by ten minutes! Oh well
@@j.d.saccociates3313 and/or ask Brad's Guitar Garage during a live stream, he and Lyle try to mIntain a list of techs....
I heard you say that you went through a lot of solder and boy.I bet you do go through a lot of solder.I bet you go through a shit ton of it That and resistors and capacitors a few diodes output Transformers.Main transformers chokes all that shit.
Y
just farted
press like if u agree
Dental pick = sheet metal scribe.