I'm having this problem for a long time and i was looking for the right video throughout the youtube and now i got it. I went to two service center, none of them had the solution. Thanks brother.
Man you just saved me 1800 bucks. The chain on my Fz v2 was making a horrendous sound as if it would tear apart, cleaning and lubing did no help. Every mechanic suggested changing the whole chain set. But I changed the lock and boom magic, I was hoping the sound would become lower but it completely vanished. Thanks a lot bro, keep making more such videos.
A big THANKS to everyone like YOU for sharing their personal experiences as much as possible when it comes to as minute of something as this one in the video....just Rs 5 for the spare part and some oil in comparison the hefty bill of replacing the entire chain sprocket if consulted with a service center mechanic...
मेरी बाइक के चेन से भी आवाज आ रही थी । बहुत सारे मेकेनिक को दिखाया सब ये बोला कि चेन सेट बदल दो । लेकिन आज मेने यही काम किया अब चेन से आवाज आना बंद हो गयी है आपका बहुत धन्यवाद भाई जी 🙏🙏
Thanks bro .. as you are using fzs v3 the shaft of the sproket is not of good quality so make sure you keep it lubricated regularly. There are many videos comming forward about this problem. So just be careful.
Same sound I had with my fzs bike after servicing. When I went to local mechanic he said it's because of timing chain problem which is not the correct reason. Thanks a lot brother for sharing such useful information. I have liked the video and subscribed the channel.
Very interesting indeed. I also own a FZS. I had a similar problem and many asked me to change the whole chain and sprocket set. I after checking found the front sprocket had worn out a bit and the teeth had become sharp pointed !!. So I only changed the front sprocket and the noise stopped !
Are u sure bro its orignal coz I have good contact with yamaha spare store and they don't sell the front sproket separately. I wish I found the same in pune too.
Solid video bro. And yes, nearly all owner's manuals I've read that come with motorcycles recommend standard gear oil for lubrication. The same user manuals never really say to change the chain set after any number of Kilometers. Just check and maintain. Only replace chain sets when the chain sags too much and the tension is already at the maximum as per the owner's manual.
And my mechanic said, you need buy full chain set which include spocket of front and rear and the chain. Also he suggested me to buy many parts which would cost me 15k BDT(approximation) for apparently no reason. This showroom mechanics. They just try to cut the pocket of a poor biker. Most of the parts can be repaired most of the times. But they will say to always buy new parts even if it's just got a scratch. SHame on the manufacturer
Update : Change the front sprocket if the noise comes back - it worked on my father's unicorn. If the chain is rusted change the chain, front and back sprocket - it worked on my fz 16. Don't by chain and sprocket assembly from local shops, if possible buy it from the official dealership. If bought from a local store check it properly. Original sprockets (Yamaha) will be with silver colour and not the bronze or gold colour. The original chain doesn't comes with a quick link. The mechanic may recommend you the chain with quick links because they are easy to replace but they are definitely fragile. Lube the chain with gear oil and wipe the excess with a cloth, do not use any kind of Grease on the chain especially on the front sprocket because it will accumulate dirt and wear out the front sprocket even faster. Wash and lube the chain every month and in rainy season do it more often. Wash it with soapy water and do not use petrol, use disel or kerosine or chain cleaner but they are also not recommended, if you have pressure washer use it.
I have the same problem on my Yamaha FZ. I approached a mechanic and he just removed the front sprocket cover, removed the inner sprocket, applied grease on the drive shaft, then cleaned the sprocket, put it back, and lastly adjusted the chain. After that, the chain sound completely disappeared, but after 200-300km of riding, it came back. I'm planning to do this way, so I hope it will work.
Hii My duke 200 bs6 has the same issue with the sound and the showroom people told me to change the entire sprocket but i visited my frnd garrage and he suggested to change the GB sprocket and i did it..surprisingly i have no problem with the chain now and it’s running smoothly now.. showroom people always suggest u to change the sprocket which costs 2800+900 labour but i finished my work in 210 rupees by changing the GB sprocket and it’s running smooth like before❤
Bhai mere chain se v kat kat ki sound aati h jb accelerate krta hoon. Lkin lube krne k baad sound nai aata h. Lkin jaise hi lube kia hua3-4 din hota hai. Waps se sound aane lgta h. Iska solution v same rhega kya
Sir which sprocket do you use? I will be needing to change my fzs v3(14t/41t) entire set soon, i've been thinking of using the r15 v2 set(15t/47t), for better torque(hilly area) . Some say drive shaft can be damaged, whats your experience?
Im having the same problem with my venom x20 but it looks like its laying down on a part thats attached the the foot peg it has a rubber top so it doesnt scratch metal but you can hear it like its scratching. I habent replaved the sprocket lock cap but was womdering if thats what needs to be replaced
Hi Moto Mentor, I m looking for the best LED headbulb for the FZS that adapts well to FZ reflector. The bulb I m looking for is the beam pattern coming from the LED should have same as the halogen bulb produces. Do you have any idea of that? If separate video can you make for that also good thing. Thanks 😊
Hey buddy ......since you have change the sproket and chain and still facing the same issue there is a possible that the chain is not aligned properly may be it not install correctly I mean its not getting tight with the right tensioner make sure there are double nut at the end of the swing arm to make sure it doest loose the grip. Are you doing it by your self ?
I have used .. yamalube 20w 40, motul 15w 50 and currently using 20w 50 motul fully synthetic.. which is working like a charm ... i do most of the servicing by my self since last 7 yrs my bike hasn't seen the face of service center.
Uneven chain set ka koi solution h mane new chain set dalwata tha 3500km pr hi un even chlne laga h kya krun lube achhe se rakhta hun or vhain slack bhi
Hello Sir Would you suggest using oil instead of Chain lube,because right now i am using putoline chain lube for my Honda Hiness and not that happy i feel a lot of chain grinding sensation,bike has just done 7000 kms.please suggest and which oil to use
It is usually recommended to change front and rear sproker however even I am curious to know the result if we only change the front sproket unfortunately there is no proper video on RUclips but I have for the complete chain set out of which I will be trying only front sproket replacement and then will share the difference with you guys very soon.
@@MOTOMENTOR cool bro... Please do it. It will be very helpful. My fz chain overtight at 5000 km. Gear shifting very rough and if there's pillion sound coming from rear..
@@MOTOMENTORHi Bro this id Akshay I own a Tvs Apache Rtr 160 recently i have changed the chain sprocket set adn not even 2K crossed im getting exactly the same sound and some mechanics saying chain sprocket gone ? How's that possible even im cleaning and lubing the chain timely and keeping it fyn dont know and im really frustrated of that sounf and some says that chain sprocket got bent ? dont know what to change please give me a clarity of what should i do ryt now and my bike condition was 50K + and 6+ years old changed 3 sprockets as of now
It will not loose power this will be more noisy and will create vibrations and if not lubricated regular than over the period if time it will damage the shaft which can be replaced only by opening the entire engine.
The noise is still there just subtle, It needs a new set of chain and sprocket mine only lasted 53k km even well maintained with Gear oil 90w, Wear and tear cannot be avoided
Bro is it good to mix multipurpose grease with gear oil for chainlube. Bro I am currently using 140grade gear oil. Is 2t oil good for chainlube. Which grade of gear oil is the best for chainlubing.
@@MOTOMENTOR Used wrong word sorry . Exactly Bike 1st gear or 2nd gear 3rd gear mai jhtka deti hai. Or jb main stand pr bike lga kr wheel spin krien to same sound bhi ati hai. Or First start krien jb or First gear lgaien to bike clutch pakry huai bhi agy chli jati hai
I'm having this problem for a long time and i was looking for the right video throughout the youtube and now i got it. I went to two service center, none of them had the solution. Thanks brother.
Same situation. Thanks a ton ❤
All these years i was wasting money on buying chain spray .......thanks for the videos
Man you just saved me 1800 bucks. The chain on my Fz v2 was making a horrendous sound as if it would tear apart, cleaning and lubing did no help. Every mechanic suggested changing the whole chain set. But I changed the lock and boom magic, I was hoping the sound would become lower but it completely vanished. Thanks a lot bro, keep making more such videos.
Thanks brother I will surely keep making stuff like this for us thanks the appreciation.😃👍
Is there any remedy for an overtight chain. To make it smooth.. Does replacing front sprocket make any difference please reply
@@arjj1 Adjust the chain slack
@@arjj1 if it's too tight then its not right
I checked my front sprocket today and was concerned about the play. You have just verified my thoughts with the part. Thanks bro!🙏
Yw bro 😀 🙏
Very useful video for all who are confused with this sound
That's exactly was my intention to have some samples comparison. Thanks for watching hope you have subscribed 😀 👍
A big THANKS to everyone like YOU for sharing their personal experiences as much as possible when it comes to as minute of something as this one in the video....just Rs 5 for the spare part and some oil in comparison the hefty bill of replacing the entire chain sprocket if consulted with a service center mechanic...
Dealer near me is not providing front sprocket. He says you need to buy whole chain set
मेरी बाइक के चेन से भी आवाज आ रही थी । बहुत सारे मेकेनिक को दिखाया सब ये बोला कि चेन सेट बदल दो ।
लेकिन आज मेने यही काम किया अब चेन से आवाज आना बंद हो गयी है आपका बहुत धन्यवाद भाई जी 🙏🙏
Mujhe khusi milti hai ka mai kisi ke kam aa sak rahahu videos ke zariye .. thanks for watching amit bhai.
Searching solution for similar problem in My Yahama FZ v3... and it really helped me. Thanks alot. 🙏
Thanks bro .. as you are using fzs v3 the shaft of the sproket is not of good quality so make sure you keep it lubricated regularly. There are many videos comming forward about this problem. So just be careful.
@@MOTOMENTOR Thanks for the information... I will keep in mind. ;)
@@azraelwai YW BRO 😀👍
This is my major problem now with my yamaha tracer mt09, I will apply it thanks for this teaching.
Yw 😀👍
Please what's the name for that key you changed from the front sprocket sir?
Same sound I had with my fzs bike after servicing. When I went to local mechanic he said it's because of timing chain problem which is not the correct reason. Thanks a lot brother for sharing such useful information.
I have liked the video and subscribed the channel.
Yw bro thanks for your valuable comment 👍 🙏
Nyc content brother, love from Kerala ♥️
Excellent video brother.. It helped me save my hard earned money.. The noise is gone.. Live long man! 🎉
Jazakallaha bro hope you have subscribed .
@@MOTOMENTOR ya bro did subscribe
😀👍
I tried this and it really works, Sprocket sound was 'PIA' for some time. Finally got rid of this.
Thankyou
Your welcome brother 🙏 😃👍
Is there any remedy for an overtight chain. To make it smooth.. Does replacing front sprocket make any difference please reply
Very interesting indeed. I also own a FZS. I had a similar problem and many asked me to change the whole chain and sprocket set. I after checking found the front sprocket had worn out a bit and the teeth had become sharp pointed !!. So I only changed the front sprocket and the noise stopped !
At what price you got the front sproket? And m guessing it's after market one.
@@MOTOMENTOR I think it was about ₹230 . ( About 3 years ago, so don't remember exactly )
@@MOTOMENTOR tu
@@MOTOMENTOR at present yamaha original front sprocket cost me Rs.125 only
Are u sure bro its orignal coz I have good contact with yamaha spare store and they don't sell the front sproket separately. I wish I found the same in pune too.
Solid video bro.
And yes, nearly all owner's manuals I've read that come with motorcycles recommend standard gear oil for lubrication. The same user manuals never really say to change the chain set after any number of Kilometers. Just check and maintain. Only replace chain sets when the chain sags too much and the tension is already at the maximum as per the owner's manual.
Thanks bro 🙏
Bro, ur each content is very clear and detailed. Very professional content creator u are😎👍
Thanks bro 😀👍
Mai apne yamaha szr bike se bahut pareshan rehta hoo ,.apke ish video se mai bahot khoos hooo.
I love when the title of a video is in English but video itself isn't. Just fvcking awesome
It was in English when I watched it.
SUPER WORK AND SUPER VIDEO❤❤❤❤❤
Thanks🙏
Thanks a lot, mr. "So guys" !!
Very useful video.
🤣👍
I have watched 100s of video related to chain noise but this video is the best . Thank you for making this type of amazing videos
Thanks amit ❤🙏✌
Subscribed your channel ❤️✌️
Thanks bro🙏
thnk u sooo much broo.. meri bike me ahe noise se pareshan tha..
Yw bro 😀👍
Awesome man your suggestion saved me my money 🤑
Your are really awesome 👍
Thanks bro 🙏
Very informative even i'm feel same problem in Honda hirnetv160R hope this goes well with my bike too
Best video i have seen about the sound in chain
Might he speak english it makes this video to millions of views
Thanks bhai yrr apki video ne bohut help ki🎉❤
Yw bro 😀
Should I put 1 more locker to fixed it (not too loose)?
Thanks alot !
No bro a minor play has to be there.
Wonderful content as usual. Great job 👏🏼👏🏼
Fantastic information.. Planning to do this with my R15. Thank you.
Definitely. We had recommended to use oil 90 . Which is printed on the chains box packaged .
Khana se le app ne online mgvai?
And my mechanic said, you need buy full chain set which include spocket of front and rear and the chain. Also he suggested me to buy many parts which would cost me 15k BDT(approximation) for apparently no reason.
This showroom mechanics. They just try to cut the pocket of a poor biker. Most of the parts can be repaired most of the times. But they will say to always buy new parts even if it's just got a scratch. SHame on the manufacturer
Got exactly what I was looking for. I was looking for the before and after demo, most of them doesn't show such things.
Very true
Update : Change the front sprocket if the noise comes back - it worked on my father's unicorn. If the chain is rusted change the chain, front and back
sprocket - it worked on my fz 16.
Don't by chain and sprocket assembly from local shops, if possible buy it from the official dealership.
If bought from a local store check it properly. Original sprockets (Yamaha) will be with silver colour and not the bronze or gold colour. The original chain doesn't comes with a quick link. The mechanic may recommend you the chain with quick links because they are easy to replace but they are definitely fragile.
Lube the chain with gear oil and wipe the excess with a cloth, do not use any kind of Grease on the chain especially on the front sprocket because it will accumulate dirt and wear out the front sprocket even faster. Wash and lube the chain every month and in rainy season do it more often. Wash it with soapy water and do not use petrol, use disel or kerosine or chain cleaner but they are also not recommended, if you have pressure washer use it.
Wow ...! you got it bro that was in detail 👌.
I have same issue after change of front sprocket sound has gone but came back within 200km run
Bhai thumbnail jabardast 😂😂😂😂
I have the same problem on my Yamaha FZ. I approached a mechanic and he just removed the front sprocket cover, removed the inner sprocket, applied grease on the drive shaft, then cleaned the sprocket, put it back, and lastly adjusted the chain. After that, the chain sound completely disappeared, but after 200-300km of riding, it came back. I'm planning to do this way, so I hope it will work.
brother my problem is chain is completely ok no sound but while throttling some sort of vibrational sound coming near front sprocket zone..
Does it goes away after lubricating front sproket teeth and shaft?
Maintenance Acchi Rakho Bhai,
40000 Pe Change Kraya H Maine Chain Set Apni Bike Ka.
Very true 👍
Better use 90 0r 140 oil for chains. They are thicker and more lubricative
I use gear oil 90 but it makes my loose soo much what to do?
Good 👍 l love you my brother 100% perfect channel
Love you too bro thanks for all the support 🙏
Full support 👍👍👍
Big thanks
What a Interesting job thank U bro.🙏🙏
Hii
My duke 200 bs6 has the same issue with the sound and the showroom people told me to change the entire sprocket but i visited my frnd garrage and he suggested to change the GB sprocket and i did it..surprisingly i have no problem with the chain now and it’s running smoothly now..
showroom people always suggest u to change the sprocket which costs 2800+900 labour but i finished my work in 210 rupees by changing the GB sprocket and it’s running smooth like before❤
Showroom will just loot you even if the spare part can still last they will ask you to replace.
Good video bro 👌
😊... Useful this your video 📸
Thanks for sharing that chain sprocket ka play zarori h mai to aur tight ka tarika dhund rha tha
Yw bro 😀👍
Bhai mere chain se v kat kat ki sound aati h jb accelerate krta hoon. Lkin lube krne k baad sound nai aata h. Lkin jaise hi lube kia hua3-4 din hota hai. Waps se sound aane lgta h.
Iska solution v same rhega kya
Very useful information ... Thanks bro...
Thanks for sharing this tips. Keep it up and safe ride always.
Sir which sprocket do you use? I will be needing to change my fzs v3(14t/41t) entire set soon, i've been thinking of using the r15 v2 set(15t/47t), for better torque(hilly area) . Some say drive shaft can be damaged, whats your experience?
Did you change your sprocket bro? If yes, how is the performance and mileage??
All stupid mechanics asking to go with new sprocket instead 😢
True bro
Helpful tha bhai, thanks.
Yw bro 👍🙏
Great job 👍🤞
Im having the same problem with my venom x20 but it looks like its laying down on a part thats attached the the foot peg it has a rubber top so it doesnt scratch metal but you can hear it like its scratching. I habent replaved the sprocket lock cap but was womdering if thats what needs to be replaced
What you use for chain cleaning ?? Kerosene oil are not available now days ??
Perfect job done thanks
Yw 😀👍
Hi Moto Mentor, I m looking for the best LED headbulb for the FZS that adapts well to FZ reflector. The bulb I m looking for is the beam pattern coming from the LED should have same as the halogen bulb produces. Do you have any idea of that? If separate video can you make for that also good thing. Thanks 😊
I suggest you to buy nighteye led bulb
ruclips.net/video/Aj6oGTVhAZA/видео.html
U can check this for LED Bulb & indicators DIY on Fzs 👍🏻
Sir can i use ep 90 API GL-4 gear oil for chain lube(fzs v3)?
Yes
Brother was your bike making noise while moving in start?
Sir, my unicorn 150 chain gets loose every week. I have changed chain sprocket before 4 months. Need your kind advise please. Thx
Hey buddy ......since you have change the sproket and chain and still facing the same issue there is a possible that the chain is not aligned properly may be it not install correctly I mean its not getting tight with the right tensioner make sure there are double nut at the end of the swing arm to make sure it doest loose the grip. Are you doing it by your self ?
@MOTO MENTOR Thank you for your kind information. No, my mechanic is doing it. I will share your feedback with him. Many thanks again bro.
@@desituber5814 hey how old is your bike ?
@MOTO MENTOR @MOTO MENTOR 2018, every week I have to get the chain tightened. My mechanic said, its normal with unicorn 150.
Bhai ye problem kharab road me awas nikal ta he?
Bro does this make noise when you ride to bad roads? 1:19
Thanks my bike problem solved
Great information 🤟
Thanks bro 🙏
Which grade and company engine oil you use and were do you service the bike
I have used .. yamalube 20w 40, motul 15w 50 and currently using 20w 50 motul fully synthetic.. which is working like a charm ... i do most of the servicing by my self since last 7 yrs my bike hasn't seen the face of service center.
@@MOTOMENTOR what points to cover in bike servicing
@@MOTOMENTOR how was your experience with Yamaha lube
iska sprocket holder or r15 v3 ka same hai kya
Wow amazing bro.. thanks 👍
Yw Bro 😀
Having the same issues on my Z 125. Thanks
Yw 😀👍
Brother,whether this lock available for old gixxer ?
I will be bro just approach the suzuki service center and ask for this lock if they don't have request them if they can get it for you.
Uneven chain set ka koi solution h mane new chain set dalwata tha 3500km pr hi un even chlne laga h kya krun lube achhe se rakhta hun or vhain slack bhi
Aap mere insta par video share karo ..... aur ek bar rear wheel alignment check karo.
@@MOTOMENTOR sab kuch check kr liya brooo
Bhai mere bike ki chain ⛓️ ku full Tait karchu Ka Hu My Kya Usme Se Chain ke Phalli Ya Nai Ke chain ko chota karsak the hai kya kya gadi chalegi 🙏🙏
Hello Sir
Would you suggest using oil instead of Chain lube,because right now i am using putoline chain lube for my Honda Hiness and not that happy i feel a lot of chain grinding sensation,bike has just done 7000 kms.please suggest and which oil to use
Yes You can try either 90 or 120 grade gear oil. I have have been using gear oil since 14 years and quite happy with it .
Gear oil low speed 2 wheelers ke liye kaam karta hai. Par high speed jaise 90 plus pe gear oil nikal jaata hai
Is there any remedy for an overtight chain. To make it smooth.. Does replacing front sprocket make any difference please reply
It is usually recommended to change front and rear sproker however even I am curious to know the result if we only change the front sproket unfortunately there is no proper video on RUclips but I have for the complete chain set out of which I will be trying only front sproket replacement and then will share the difference with you guys very soon.
@@MOTOMENTOR cool bro... Please do it. It will be very helpful. My fz chain overtight at 5000 km. Gear shifting very rough and if there's pillion sound coming from rear..
@@MOTOMENTOR 💕
@@MOTOMENTORHi Bro this id Akshay I own a Tvs Apache Rtr 160 recently i have changed the chain sprocket set adn not even 2K crossed im getting exactly the same sound and some mechanics saying chain sprocket gone ? How's that possible even im cleaning and lubing the chain timely and keeping it fyn dont know and im really frustrated of that sounf and some says that chain sprocket got bent ? dont know what to change please give me a clarity of what should i do ryt now and my bike condition was 50K + and 6+ years old changed 3 sprockets as of now
Ye kis service centre par milega I have visited all the centre nearby me is it available for Yamaha fzs
Please make some video on front and rear shockers, their function and adjustment, etc. With regards
what is the charge dor cleaning carburator?
After how many kms do you clean and oil the chain using 90 no oil?
This front sprocket lock available for ns 200 in spare parts shop?
Yes You can get it from bajaj showroom.
Does it cause motorcycle to loose power as well,if chain is loose? Please let me know,thanks
It will not loose power this will be more noisy and will create vibrations and if not lubricated regular than over the period if time it will damage the shaft which can be replaced only by opening the entire engine.
The noise is still there just subtle, It needs a new set of chain and sprocket mine only lasted 53k km even well maintained with Gear oil 90w, Wear and tear cannot be avoided
I agree with you.
Bro is it good to mix multipurpose grease with gear oil for chainlube. Bro I am currently using 140grade gear oil. Is 2t oil good for chainlube. Which grade of gear oil is the best for chainlubing.
140 is also good but personally I haven't tried it i have been using 90 grade since a decade and never had any issues.
Woooww...good job..im indo
Thanks bro.
my bike also wobble a bit and the chain sporcket set is new
will it fix that too
Bike wobble can be a diff issue do u feel like you will fall while taking a lean turn
@@MOTOMENTOR Used wrong word sorry . Exactly Bike 1st gear or 2nd gear 3rd gear mai jhtka deti hai. Or jb main stand pr bike lga kr wheel spin krien to same sound bhi ati hai. Or First start krien jb or First gear lgaien to bike clutch pakry huai bhi agy chli jati hai
I request you please one make video engine sound problem fzs how to solve engine sound problem
Does your chain stops moving when in first gear, if clutch is pressed?
There is slightly a movement for me. But if its too much then clutch settings needs to be adjusted.
Good job
Chain ki sound ghanta sunae de gi kyuki jb bhi chain ki guma rhe ho tbi ap beech mai bol rhe ho
Is it applicable for Gixxer sf also?
Yes
36000Kms on CBR250R original chain. Lubes monthly with grease or engine oil.
Very informative
Thanks bro 🙏 😃👍
same noise coming from my chain also, service center suggests to replace full chain sprocket & my chain is in very good condition.
Try this before replacing make sure to lube it properly.
@@MOTOMENTOR i don't have any good tools just a plier & small adjustable wrench even the sprocket cover nuts cannot be removed with those.
Thanks for this valuable info❤️
Yw bro 😀✌👍
thank you for sharing this knowledge with us
Yw bro 😃👍
Hlo bro i have rs 200 , whenever i press clutch and do downshift chain started noiseing kad kad sound . 7000 km driven only
Sir can I used gear oil ....
Yes ... m still using gear oil since 12 yrs
My brand new Apache 160 is giving rattling sound when riding with pillion but if i ride single then no noise....what could be the problem?
Useful information bro thanks
Thanks danish hope you subscribed.
thanks👍👍
Yw bro 😀 👍
Sir meri bike pe jb 2 log ho tb shenset aawaj kr rhi h jb me akela chala rha hu to shi chal rhi h
Front sprocket bhi showroom me milta hai ya pura set?
Unfortunately pura set lena padta hai
Can we change only chain
Sir, Which is better chain lube or this yamalube oil?🤔
Both are good I use castrol gear oil its budget friendly and quantity is lil better.
Kitne km pr front sprocket me oil dalte ho
Mujhe jub b dry noise aati hai mai lube karleta hu .
Nicely explained .
Thanks bro 😊 🙏
thanks bhai same problem thi
Is there any improvement now?