(SPECS) 2010 Kawasaki ER6N chain and sprocket change
HTML-код
- Опубликовано: 3 авг 2018
- Engine Sprocket Nut (125Nm, 12.7kgf-m, 92ft-lbs)
Rear Axle Nut (108Nm, 11.0kgf-m, 80ft-lbs)
Rear Sprocket Nuts (59Nm, 6.0kgf-m, 44ft-lbs)
Chain (1 inch to 1-1/4 inch of slack) Авто/Мото
Would you suggest 16T front sprocket
A 16t will fit under the front cover and is nice for cruising. My bike doesnt like anything over 110mph. Maybe 120 on a good road. It wobbles a bit. So increasing the front sprocket for more speed is pointless to me. Dropping to a 14t is fun. Way more low end. But if you are always on a freeway, go 16t.
@@weightofast thanks for the quick and crisp response. Helps a lot of noobs like me. 😉
I will need to find out where i can get the 16T front sprocket now. Will post the result later.
No problem. You can find chain and sprocket kits all over. This is also the same bike as the Ninja 650, it just doesnt have fairings.
There's no sound to the video and it's at like 2x speed. Anyone else?
Sorry, that's how I made it. No voice over, no music.