installing a sight mount, cocking handle, and a red dot sight on a AW Custom HX24 Wind Velocity
HTML-код
- Опубликовано: 4 окт 2024
- this is on putting on a sight mount a sight and a cocking handle
my last video was on the dissemble of this gun
this is the sight mount www.evike.com/...
this is the red dot sight www.amazon.com...
this is the charging handle www.evike.com/...
Ninja is the only video I found of how to attach a red dot to a hi cappa
Such a great video. I would be clueless without this vid, thanks
Hahahaha no problem
thanks for your video man
No problem thanks for the support
Thank you for posting, great initative!
Appreciate the support
dude thanks so much this is the only video i found on this mount and honestly it looks incredible
Thanks im happy to help
@@spraynpray2242 I just got a new Lancer Tactical 1911 Knightshade and I will be doing the same thing to it. Although it looks pretty universal i would like you to do it on that pistol too iff you could.
@@frankyrojas5306 um like u want to ship it to me?
No thanks bro but i appreciate the offer. Keep up the great videos!👌👌
@@frankyrojas5306 oooo you meant i should do a vid on it i can do some Research on that I can get back to you if you would like
Nice attachments and pistol setups, why do soldiers dont do these to their service pistol?
I think it is mostly cuz the holsters they use couldn’t hold it and or since they have a rifle and will probably only use a pistol in close quarters they don’t really need it
Thanks for the tutorial
No problem
pretty cool build u got there
Thanks yo
I had the same mount on my hi capa that one is a 5ku if im not mistaken and the scopes are lose when mounted. That mount is really bad. I put spacers to solve the issue but vibration eventually takes over and i had to readjust. Worst purchase i ever made.
Ya i ended up striping the bolts and ultimately just left it off cuz it was not getting tight enough but why is didn’t relies is their is a mount that is made for that pistol so if thats what you have then that would be good u can find it on evike it attaches to the lower frame
Great video. A tip would be to be a bit more brief cause you at times dragged things out further than the instructions needed to be
Ok i will keep that in mind in future videos
@@spraynpray2242 you’re doing great though, keep it up
@@SchmooglyBoo will do
Keep up the good work
Thanks bro hope it helped
ATTENTION 1911 OWNERS, THIS SIGHT WILL NOT FIT ON A 1911, IT ONLY FITS ON 2011 MODEL PISTOLS!
its a hicapa..... made for hi capa 1911s and hi capas are completely different guns.
its off by a millimeter so its completely ok for someone to assume it fits@@something4479
Will the rail work on a EMG / STI International DVC 3-GUN 2011
throw a little lock tight on that screw then tighten as far as comfortable with.
Thats a good idea will do
hey man, hope u can help me, i got one same as yours but is one airgun version, sometimes the slide lock open before the mag is empty, what could be the problem ?
I have the same gun
I would like you to do a spring tri shot shotgun
I have a video of a partial disassembly on a tri shotgun
Hey man, cool tutorial. Does your slide catch work when you put an empty mag in? I got one and it doesn’t.
Thanks man it means alot and back when i uesd the mags it would
What the problem might b is u ran out of air like try fillinf up the mag with only grean gas/propane and no bbs then shoot if it dosent work let me work and ill look at mine
@@spraynpray2242 it does not lock back dry firing.
@@erickcastro7324 r you shur it is pushed in all the way cus i know that sometimes when i put it back together it would be out a little because of the pin so mabe try pushing it into place or if you have insta u could just send me a vidio and i could take a look at it then
What cocking handles did you use, and also is your hi capa a 5.1 or a 4.3
It is the aw wind velocity cocking handles on evike and its an hx24 it is built like a hi capa but it dosent say it in the description but i would guess it is 5.1
Can you send a link where you bought this kind of upgrade thank you
this is the mount: www.evike.com/products/72977/
is that what u ment?
Where did you get the sight? maybe a link would be nice?
this is the sight mount www.evike.com/products/23474/
this is the sight www.amazon.com/Tactical-Handgun-Shunting-Adjustable-SightPistol/dp/B08QMH1ZY2/ref=sr_1_34?crid=HERFNVF8LJ99&keywords=red+dot+sights+sotac&qid=1640618713&sprefix=red+dot+sights+sotac%2Caps%2C84&sr=8-34
Where did u get that sight mount and do they work for brettas
I got it on evike and i dont think it will work on brettas
can u post a link for the sight mount an cocking handle pls?
mount: www.evike.com/products/72977/
cocking handle but their out of stock: www.evike.com/products/64783/
hi I will soon receive a 1911 like yours and I wanted to install a red dot but for that I need rails like you, could you give me the links of your rails?
because I can't find it on evike
this is the one in the vid but im not shuer if it will go on a 1911 cuz it says hi capa series on it: https: //www.evike.com/products/23474/
if u have a pickitiny rail system on the bottom this should work if you want a other option: https: //www.evike.com/products/30739/
let me know if you need anything else
@@spraynpray2242 thank you very much and the little bar which allows the breech to be pulled, do you have the link?
Do you know how much this gun weighs stock?
I would guess 1 and a half lbs with the mag and maybe one lb without the mag but i dont know for shure
Is it normal for the scope to be loose when mounting to the rails?
Can u elaborate how is the scope loose
Hi where did you get your gun wrap from?
I did not.get it wrapped
where did you buy all this stuff? is there a website or is this all one kit?
The mount on evike and the sight on amazon
And the cocking handle on.evike as.well
Would the mount be able to go on a WE hi capa 3.8?
I dont see why it wouldn’t be able to.
I’m just saying never use WD40 it’s really bad for your gun using a silicone based lubricant it much better
Ya someone said that in the comments and i stopped using it but nothing has happened to my gun i believe you but it is still working fine
And i did start using the lubricant that is for them
Have you an link for the rail ?
i am sorry i couldn't find the link for it but i found some that go with the gun and just some similar to the one in the vid
www.evike.com/products/64782/
www.evike.com/products/44427/
www.salientarmsinternational.com/product/proshop/30739/
i will continue to look for the exact one let me know if their is anything else
why did you take 15 min to do this, and why did you gut the whole gun just to change the rear sight
To go into how it works for newer people and cuz when i started of in airsoft i searched for so long to find a vid showing this so for the newer people i want them to take as mush away as possible
@@spraynpray2242 ohhhhh okay. That makes sense
@@xandermora4046 ya im sorry id it took to long to get to the main video
do you reckon the rail will fit on a 1911?
It might i dont have one so i dont know for shure it might take a little tweeking it ,but i dont see y it wouldent
Please help, I did all this and now my gun won't shoot. Put it all back how it was and still won't, I cock it and it won't stay cocked, the slide just moves back.
Yes i had this happen it is ok all u need to do is take the silver plate out of the back of the handel and put it back un till it works if u need me to elaborate just say so
did it work?
@@spraynpray2242 nah, I'm no good at gun assembly. If I mail u my gun, could u try and fix it? I'll pay u of course. Every time I try to enhance one of my guns, I end up breaking it haha. I have the HX24 wind velocity, and I would like to install a stronger spring, as well as the scope attachment that u show here. Let me know of u can help me out, thank you
@@UnrealSickness what time if u just give me your number we could FaceTime on a certain day and i could joust teach you cuz it is always better to learn how to do it then to hand it of to someone else, and if it happens again you will know what to to cuz it has happened multiple times to me
@@spraynpray2242 my comment keeps getting deleted
Hey man so when I put green gas in the mag when I shout the gun it all comes out like the heck
Try tightening the mag up or the bbu
I had this happen when I shot it upside-down
@@spraynpray2242 ok thank you
Or it could be one of ur internals in the pistol
@@spraynpray2242 because I shot it and when it went back it would fly out of the mag
where did you get these parts?
evike
and the sight was from amazon
Will this work on a TM 5.1 Hi Capa
I think it will
@@spraynpray2242 Coooooooool
Lemme know if it dose
To silet
Ya thats y i have a amp