If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne.
Like the turbine room all it needs is white paint lol when I see you do thd photoetch it reminds me of a 70s song called bend it bend it just a little more lol
Regarding modifications, to an extent it depends how accessible/visible the part is and/or will be in the finished model. Also if it is reversible. For example if you can access the area simply by undoing a couple of screws you may go back at a later date. Also if the modification is weathering you may not be able to undo any painting.
That turbine room is too clean. Every museum ship I’ve been on and I’ve been on two battleships and one aircraft carrier and the engine rooms are full of pipes of all sizes and valves of all sizes going everywhere in every direction there are even walk ways with steps and tiny platforms that go over pipes that just happen to be slightly above floor level. You can’t go wrong by using old spru pieces as piping just put a lot of it in that open space.
Hello Wayne that's an amazing battleship Bismarck 1:200 scale. Nice work on this wonderful build. I like that lets get cracking. Magnificent battleship build. I enjoyed this video cool. 🤗😇👍👏🙏🙌🤓😁😀😎😊🙂☺
45:30 This part I dont get. Modelbuilding is all about glueing parts together, sure, but why are these parts partly molded, partly glued. Why not either/or for a part like this?
Nice that Agora doesn't waste your time with details that you're never going to see. I watched your whole X-Wing series recently, and if I had a dollar for every stage you did stuff on there that will never, ever, EVER be seen by you or anyone else again, I'd probably be able to at LEAST buy up to this stage of this model if I wanted to.
Awesome!! I just ordered it can’t wait to start, I’ve always loved anything on the Bismarck. But tell me what kind of glue are you using anything special.
Oh I meant to say I saw I fix for the gears not meshing on the radar dish. Apparently the shaft isn't long enough so adding 1mm off a cocktail stick will stop it problem
Hi Wayne, A piece of advice please, you had problems with the radar unit on stage 91 . You advised to play around with the motor screws to get it to rotate, I am having the same problem, the motor is fine and running good, but no matter how much I adjust the screws it will not spin, do you have any other suggestions that would help me with this? Thank you again Wayne for all the time and trouble you go to to produce your videos, I still find them so useful when model building, your patience and explanations are so useful. Kind regards Gary.
Also I am curious if anyone else has applied lubrication to the gearboxes - and wondering if its necessary. I would be necessary at to apply at this stage if needed. Thanks much !
Very nice Wayne, looks really good, I thought you said that you were going to paint the turbine room on the Agora, or was it on the Hatchett model that you did that?
Hi Wayne, Enjoying watching the Bismarck build, could you tell me please what is the tool you are using for the glue? It looks safer than using a cocktail stick. Many thanks, Gary.
Hi Wayne, I followed the link for this video from the Agora website but this should be the Zero Pack 7 video according to the Agora site, I have informed them of the error but it has not been corrected, could you correct it? Thanks in advance.
How many “every six week” deliveries are there for the Agora Titanic? Is it sixteen over 24 months? I sure appreciate your videos. Do you know yet if the Lancaster is available?
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne.
Like the turbine room all it needs is white paint lol when I see you do thd photoetch it reminds me of a 70s song called bend it bend it just a little more lol
Just like before when this was with hachette this was a very very fiddly set of stages in this pack.
Loving the build as all ways.
Stay safe all.
Must admit that out of all the £1000 plus subscription models around this seems to give most bang per buck.
Starting to come together nicely :)
The most intresting👍👍👍👍 , I have a magazine with the number 23
Either way, the ship is looking fantastic. 👌
Regarding modifications, to an extent it depends how accessible/visible the part is and/or will be in the finished model. Also if it is reversible. For example if you can access the area simply by undoing a couple of screws you may go back at a later date. Also if the modification is weathering you may not be able to undo any painting.
This is coming out remarkable!
Love it! But there's a bit missing off the top of one of the hangers 😮
Is there. I will have to take another look
Looking really nice Wayne.
That turbine room is too clean. Every museum ship I’ve been on and I’ve been on two battleships and one aircraft carrier and the engine rooms are full of pipes of all sizes and valves of all sizes going everywhere in every direction there are even walk ways with steps and tiny platforms that go over pipes that just happen to be slightly above floor level. You can’t go wrong by using old spru pieces as piping just put a lot of it in that open space.
Hello Wayne that's an amazing battleship Bismarck 1:200 scale. Nice work on this wonderful build. I like that lets get cracking. Magnificent battleship build. I enjoyed this video cool. 🤗😇👍👏🙏🙌🤓😁😀😎😊🙂☺
45:30 This part I dont get. Modelbuilding is all about glueing parts together, sure, but why are these parts partly molded, partly glued. Why not either/or for a part like this?
Nice that Agora doesn't waste your time with details that you're never going to see. I watched your whole X-Wing series recently, and if I had a dollar for every stage you did stuff on there that will never, ever, EVER be seen by you or anyone else again, I'd probably be able to at LEAST buy up to this stage of this model if I wanted to.
Awesome!! I just ordered it can’t wait to start, I’ve always loved anything on the Bismarck. But tell me what kind of glue are you using anything special.
Oh I meant to say I saw I fix for the gears not meshing on the radar dish. Apparently the shaft isn't long enough so adding 1mm off a cocktail stick will stop it problem
Hi Wayne,
A piece of advice please, you had problems with the radar unit on stage 91 . You advised to play around with the motor screws to get it to rotate, I am having the same problem, the motor is fine and running good, but no matter how much I adjust the screws it will not spin, do you have any other suggestions that would help me with this?
Thank you again Wayne for all the time and trouble you go to to produce your videos, I still find them so useful when model building, your patience and explanations are so useful.
Kind regards
Gary.
Some folks report the spindle isn’t long enough. Either lifting the motor slightly is figuring a way to extend it has been successful
Awesome battleship
Also I am curious if anyone else has applied lubrication to the gearboxes - and wondering if its necessary. I would be necessary at to apply at this stage if needed. Thanks much !
Very nice Wayne, looks really good, I thought you said that you were going to paint the turbine room on the Agora, or was it on the Hatchett model that you did that?
I didn’t do any in the end. I just ran out of time
AZ-
Hi Wayne,
Enjoying watching the Bismarck build, could you tell me please what is the tool you are using for the glue?
It looks safer than using a cocktail stick.
Many thanks, Gary.
It’s just a pin vice with a pin stuck in the end
@@WorldofWayneUK thanks for that.
Hi Wayne, I followed the link for this video from the Agora website but this should be the Zero Pack 7 video according to the Agora site, I have informed them of the error but it has not been corrected, could you correct it? Thanks in advance.
I am about to assemble to turbine room and would like to paint it to add some detail - any advice as to the color scheme ?
We did a live stream on this but I can’t remember where it is . I know they display them on the Facebook group
How many “every six week” deliveries are there for the Agora Titanic? Is it sixteen over 24 months?
I sure appreciate your videos. Do you know yet if the Lancaster is available?
Nothing on the Lancaster yet. Titanic is out Friday but I’m not sure what the current delivery schedule is yet
Deja vous. Did you finish the other one already?
No not yet
Like video
Hey Wayne when should you be getting the next few packs for this build ?
I have them here now
When can we expect the next video 😂 also do plan on doing the Titanic build as well?
@@Jeffrey_Haggard84 this week hopefully. I’m doing the Eaglemoss Titanic starting soon and the Agora one in May
Nice! is it for sale?????
I wonder how many of these kits were finished ?
No idea by the look of the German Facebook group , quite a few
40:16 I am once again here to inform you that you installed the fire control backwards.
Shame you couldn't paint the turbine. good Idea to stabilise the base.
hi wayne, question. i started with the one from hachette. Is there a difference between the one from hatchette and the one from agora?
Nope
At 20:54 you put one of the walkways too low.
Doh lol. I will fix it
@@WorldofWayneUK Amazing work Wayne.
Neat.
Cable management is better on here than the enterprise d
It would have been awesome if you could have put this in water in the end and drive it around.
Someone has actually turned this into a RC boat lol
does it work in water
No but some peeps have converted it so that it does
@@WorldofWayneUK ok
I'm glad you stopped doing the cannon sounds for the interval for each part in the video it was so irritated in the early ones
💵👍👍👍👍👍👍😑😑😑😑😑
YOutube is missmanaging english ^^ he Keel Section is now the "KILL"-Section *laughs*