I'm not sure if you figured the wired speed issue yet, but you have to have a 2.5 or 10gb ethernet port on your device and switch to get those speeds. I'm willing to bet it's your PC's network card, and/or your switch are only pushing 1gb and that is limiting your hardwired speed. All depends on your use case as well. Generally, it's for large data transfers across your network, not so much for streaming services. I saw comments about it being your cable. It's most likely not the cable as cat5e can even pass 10gb speed depending on the run length. 10gb network ain't cheap, but they have come down in price. A tp 10gb switch and network card would probably run you about $4 bills together. Also, you have to make sure that the ip router supports it by having a 2.5gb ethernet port... make sure you are connected to the right one on your router. They usually have a specific port that calls out 2.5gb
The name wifi 6 is misleading because it really just uses both 2.4ghz and 5ghz at the same time to get you a bit better speeds.Wifi 6E is the one that uses the 6ghz channel and Wifi 7 also uses the 6ghz channel along with other additional channels to get even better speeds.If you paid retail $1500 for those decos I would return them because there is no benefit in your setup.A set of 3 deco XE75’s would only run you $300 and give you the same 800mbps everywhere on wifi
You speak the truth. I’m gonna keep it to be future proof and because I had the money to invest. But you are correct. I haven’t seen a huge difference except that everything connects flawlessly and it’s super convenient walking around having internet over the entire acre I live on. I appreciate you commenting and clarifying. It’ll be helpful to others.
You have to make sure that your devices support WiFi 7, in other words, your devices need to support 802.11be. (Most devices are not yet.) This is why you aren't seeing much of a difference of speed. Also if you are connecting to the 6ghz band would help make the WiFi faster too, but most of your devices will not be able to detect this 6ghz band wifi because it is WPA3. However you are prepared for the future! I have those devices myself and its been great!
You make a great point. You are correct, non of my devises support 6ghz. This set up is very nice, though. So far I’m happy with the routers. :) Thank you for commenting!!
@@miamicircus305 if you upgrade to the iPhone 15 Pro Max that has Wi-Fi 6E built into it. If you want, I can send you a link to my Speedtest because I have the same unit. 1500+mbps down and 150 up over WiFi 6ghz band.
Usually means your ethernet cables are old. Get Cat7s / even Cat 8 cables...Im 99 percent positive new cables will fix your issue. Also, how fast is your ISP speeds, if it's maxed at 1gbps, then I doubt it's the cables. But, will still get new cat 7 cables.
Thank you for clarifying. You are correct. I’m more future proof, than anything else. I have no existing devices that benefit from this mesh system. But maybe next year? :) Yes it is :) I rarely have it off me.
I was gonna say the same. The devices you connect wired most likely only have a 1Gb port. So your 2.5Gb port coming out of your modem into your router will give it your full 1.2Gb speed, but your wired devices to the routers/mesh satellites will only see a max of 1Gb unless the also have at least a 2.5Gb port on them. The benefit you will see is when streaming multiple devices at once.
The first bottleneck is your cable modem, unless you have a 2.5GB NIC on your device so you can connect to the 10GB port of the Deco you will NEVER get 1.2GB speeds. I suspect that the network port on yours Cable modem is only 1GB.
@@miamicircus305 Ok perfect, just make sure that the 10GB port of the Deco is being recognising at 2.5GB speeds, otherwise ONLY on the Deco that is connected to the Cable modem you can use one of the 2.5GB ports of the Deco ( instead of the 10GB ) no point wasting a 10GB port here ) and use only the 10GB ports to connected all the Decos between them selfs. Remember, this 10GB connections between the Decos should be done over CAT6 or preferable CAT6A cable so you can have a stable and with no signal loss connection between them.
Can someone help me with my setup? I am running a Comcast modem on bridge mode and have my own router connected to their modem. But I want to upgrade my modem. 1. Will any modem work? 2 Will I have to contact them to help setup the my new modem and tp-link router?
You will have to contact them to set it up. It’s not supposed to be like that, but that’s what I had to do. For bridge mode, I think that’s just for routers, not modems. Unless it’s a modem/router combo? But not sure?
@@miguelquintero9747 thank u for chiming in. my setup is 5 years old now. I’m sure they have better options now but I feel like I can get better reliability using my own router and modem. You are running your own modem and router? Do you know if any modem will work or did you run into any issues working with them to switch over?
I saw on the TP-link launch event, it gives best when you do both wired backhaul and wireless backhaul at the same time, then it does Multi-band backhaul , and then it does backhaul aggregation🔥( wired + wireless multi-band backhaul ) timestamp 34:25 , video title 2022 TP-Link Wi-Fi 7 Product Launch Event (55min)
iPhone 13 Pro Max only supports wifi 6, so that's your bottleneck in your wireless speed tests. Kind of annoying that 5G cellular speeds can be faster than that but c'est la vie. I'm currently considering this system because im running 10 Gbit ethernet throughout the house and they all have multiple 10gbit ports.
Thank you for commenting and sharing your thoughts. I hear what you’re saying, but do a little experiment; take an old smartphone, the older the better, and try using it for a couple days. If your old device behaves exactly the same as your new device, you have great evidence. :) I did this experiment, once. Surprisingly, with the exception of camera quality, storage capacity, screen resolution, app compatibility (social media was a no go), audio quality….the old phone worked really well. I was able to use the browser, make calls over WiFi. FaceTime worked, but not well. You make a great observation. Now give it a test and let us know your results. :) Thank you again for commenting.
Once you have WiFi 6 devices or better I'm assuming your speeds will be much better compared to your WiFi 5 devices now. If you don't plan to get newer wireless devices, you're better off with what you already had and save the money. They are good for future proofing though.
I have a feeling that this may have already been sent in your comments, but a few issues with your test. First of all, you should have unplugged the older tp-link routers and access points you have so your phone does not attempt to connect to them and give you incorrect speedtest. Secondly, you are using an Iphone 13 max. That device does not have wifi-6 capabilities, so there is no possibility you would see anything close to what the speed of wifi-7 Deco can give you. Yes it has wi-fi 5, but the speed is still capped so you will not see any increase. Also, one of the many reasons I dislike Iphones is their slow adoption rate of new wi-fi standards. Dont expect to see wifi-7 chips on any Iphone before 2024 the earliest, 2025 more than likely. You should set up a "wired backhaul" and "wireless backhaul" congruently to take advantage of the potential wifi speeds the Deco will provide once you upgrade your mobile device. For now, all you can expect is faster speeds on your laptops, pc, tablets(esp if not Apple devices, due to slow adoption rate of wi-fi), and greater range of the signal. So, basically you have future proof yourself, which is good, but dont expect any of the changes you want until you upgrade your mobile devices.
Thank you for commenting. You are correct in everything you said. :) I’ll be upgrading devices soon. Thank you!! I am super happy with the system over all.
Thank you for that. I have the mini hardwired in and it’s maxing out at 1gig. That’s all the mini allows. I looked up the specs. I recently did a test with a friends iPhone 15 pro and we saw speeds exceeding 1.4 gigs which is xfinity’s highest speeds for my area. I hope we get fiber one day soon. :) I appreciate you!!
@@roadrunner197069 no worries :) I’m super happy you chose to share information. I may not have known and you were helping me out. :) that’s awesome. You’re awesome. Thank you!!
@miamicircus305 I'm not being mean it's just if you can afford products like this I'm sure you can afford a microphone some lights and your phone quality will be a lot better
@@googlefriend7685I’m working on it. But you’re definitely right. I should have made some investments early. Thank you for calling it out. I’ll do better. :)
We are all saddened by this news 🙄 Most would just click away without feeling the need to make a big deal about it, but it's hard for the more dramatic people to leave without dropping an insult first. I was looking for someone who would actually show the setup process of the Deco system and so I appreciated the video. I didn't come into it expecting a Michael Bay produced blockbuster, so maybe that's why I had a less negative reaction. Hope you ended up finding what you were looking for.
I think so. It’s pricey but everything works well. Really well. It should be good for 5 years? I also 3d printed covers and put 40x40x10mm fans. Helps the one in trailer and outside treehouse. Indoors should be ok without fans.
I’ve been pretty happy with the wifi 7. I haven’t seen a big difference except the mesh system is nice because no matter where I am on the property I have internet. I think as I buy new phones and computers I’ll see the real benefits. So happy about that. As for the gun, it’s well established in the United States that the government does not have an obligation to protect anyone. It’s individuals responsibility to protect themselves. I happen to like that. I always have my gun because it is still dangerous here with criminals. I rather have it and not need it than need it and not have it. Protecting my family is everything. I understand the trepidations among others, but this is what freedom looks like. At least as I like to say it. Remember, criminals don’t pull permits. I like our system here in the States. Thank you for asking and allowing me an opportunity to share my opinions. I appreciate you!!
@@miamicircus305 yeah I understand as long you have it for your family protection I guess it’s a good reason to own one. Where I come from freedom and gun are not the same thing. Have a good one dude
That’s a great question. For me, I believe in good people having the proper tools to protect family and property. It’s so easy for bad people to do bad things. I’ve had to catch very bad people before to stop them from hurting and killing. I made a video about that. I’ve been robbed at gun point. This is the reality of life. A gun gives me a fighting chance. I always carry my gun. Thank you for asking. I appreciate you. :)
It's not like ur devices are old it's just that apple is behind the compilation around 2 years so that's why you have the even the 2024 devices still doesn't have it.
Incredible demonstation of the deco 33000. I picked up the 22000 yesterday but had to wait 3 hours because all BestBuy Stores credit card system was down but eventually i was able to purchase it online and go in store to pick up. I'll get the 22000 next week as they were on backorder. I actually see someone with more network connected devices than i have wow and cool. The 22000 has has quad-band processing vs 33000 having trio-band process so you are gonna get some great speeds and connectivity. Thanks for the great review over your acres of property.
Hey!! Thank you for commenting and saying those nice words. I’m really happy with the mesh system and I also looked at the 22000 because it’s very similar but better priced. I think you’re going to be super happy with it. You’re future proofing the system. It’s a great investment. At the end of the day, having reliable access to the internet is a big part of our day to day lives. The only thing I’ve done extra is put 40mm fans on top of each router using a 3d printed design plate I made and it does a lot for cooling the system. Text me at 305.801.4676 when u get your mesh system and I’ll send you the files if you have a 3d printer. Or I can send you pics of mine and possibly design one for you and send it to you if you don’t have a way of designing or 3d printing. The units can get hot and the fans keep them incredibly cool. I notice a difference being that I have so so many devices communicating with the routers. Sooner is better before I get too busy with the campaign. Thanks again!! I appreciate you!!!
I just got mines on Sunday love it
That’s awesome. I’m pretty happy with mine so far. :)
I’m happy for you. I hope it lives up to all the hype.
Thanks for commenting. :)
I'm not sure if you figured the wired speed issue yet, but you have to have a 2.5 or 10gb ethernet port on your device and switch to get those speeds. I'm willing to bet it's your PC's network card, and/or your switch are only pushing 1gb and that is limiting your hardwired speed. All depends on your use case as well. Generally, it's for large data transfers across your network, not so much for streaming services. I saw comments about it being your cable. It's most likely not the cable as cat5e can even pass 10gb speed depending on the run length. 10gb network ain't cheap, but they have come down in price. A tp 10gb switch and network card would probably run you about $4 bills together. Also, you have to make sure that the ip router supports it by having a 2.5gb ethernet port... make sure you are connected to the right one on your router. They usually have a specific port that calls out 2.5gb
Everything you said is correct. :) thank you for leaving a detailed comment. I was able to figure out the wired speed. Thank you!!
The name wifi 6 is
misleading because it really just uses both 2.4ghz and 5ghz at the same time to get you a bit better speeds.Wifi 6E is the one that uses the 6ghz channel and Wifi 7 also uses the 6ghz channel along with other additional channels to get even better speeds.If you paid retail $1500 for those decos I would return them because there is no benefit in your setup.A set of 3 deco XE75’s would only run you $300 and give you the same 800mbps everywhere on wifi
You speak the truth. I’m gonna keep it to be future proof and because I had the money to invest. But you are correct. I haven’t seen a huge difference except that everything connects flawlessly and it’s super convenient walking around having internet over the entire acre I live on.
I appreciate you commenting and clarifying. It’ll be helpful to others.
Try connect all of your mesh nodes with cat6a/7/8 for getting more then 940mbps
What's the gun speed? :)
lol. I appreciate the comment. It’s Florida. I carry it like I carry my myself: openly and prominently.
Thank you for noticing. :)
You have to make sure that your devices support WiFi 7, in other words, your devices need to support 802.11be. (Most devices are not yet.) This is why you aren't seeing much of a difference of speed. Also if you are connecting to the 6ghz band would help make the WiFi faster too, but most of your devices will not be able to detect this 6ghz band wifi because it is WPA3. However you are prepared for the future! I have those devices myself and its been great!
You make a great point. You are correct, non of my devises support 6ghz.
This set up is very nice, though. So far I’m happy with the routers. :)
Thank you for commenting!!
if smartphone redmagic 8 pro and rog phone 7 😊
@@miamicircus305 if you upgrade to the iPhone 15 Pro Max that has Wi-Fi 6E built into it. If you want, I can send you a link to my Speedtest because I have the same unit. 1500+mbps down and 150 up over WiFi 6ghz band.
iPhones on Wi-Fi 6 seem to cap out around 750 mbps. That’s the 2x2 modem being the bottleneck.
@@DavidA20200thank you!! I’ll eventually do that. :)
Usually means your ethernet cables are old. Get Cat7s / even Cat 8 cables...Im 99 percent positive new cables will fix your issue. Also, how fast is your ISP speeds, if it's maxed at 1gbps, then I doubt it's the cables. But, will still get new cat 7 cables.
Thank you for that...Yes, I have cat5e. I'll be upgrading them soon...I appreciate you!!
The iPhone can only handle around 700 to sometimes peaking 850 mbps max in 5Ghz, no matter how fast your isp plan is.
Though It almost never goes beyond 800. It’s extremely rare
Thank you for clarifying. :)
1gbe ethernet cannot exceed 1gbps. you need a 2.5gbe connection on both devices. Your i[phone does not support Wifi 7. 26:32 - is that your GLOCK?
Thank you for clarifying. You are correct. I’m more future proof, than anything else. I have no existing devices that benefit from this mesh system. But maybe next year? :)
Yes it is :) I rarely have it off me.
I was gonna say the same. The devices you connect wired most likely only have a 1Gb port. So your 2.5Gb port coming out of your modem into your router will give it your full 1.2Gb speed, but your wired devices to the routers/mesh satellites will only see a max of 1Gb unless the also have at least a 2.5Gb port on them. The benefit you will see is when streaming multiple devices at once.
The first bottleneck is your cable modem, unless you have a 2.5GB NIC on your device so you can connect to the 10GB port of the Deco you will NEVER get 1.2GB speeds. I suspect that the network port on yours Cable modem is only 1GB.
Thank you for commenting. It’s actually a 2.5 gig port on the modem. But you make a valid point and I appreciate you saying it. :)
@@miamicircus305 Ok perfect, just make sure that the 10GB port of the Deco is being recognising at 2.5GB speeds, otherwise ONLY on the Deco that is connected to the Cable modem you can use one of the 2.5GB ports of the Deco ( instead of the 10GB ) no point wasting a 10GB port here ) and use only the 10GB ports to connected all the Decos between them selfs. Remember, this 10GB connections between the Decos should be done over CAT6 or preferable CAT6A cable so you can have a stable and with no signal loss connection between them.
Can someone help me with my setup? I am running a Comcast modem on bridge mode and have my own router connected to their modem. But I want to upgrade my modem.
1. Will any modem work?
2 Will I have to contact them to help setup the my new modem and tp-link router?
You will have to contact them to set it up. It’s not supposed to be like that, but that’s what I had to do.
For bridge mode, I think that’s just for routers, not modems. Unless it’s a modem/router combo? But not sure?
@@miguelquintero9747 thank u for chiming in. my setup is 5 years old now. I’m sure they have better options now but I feel like I can get better reliability using my own router and modem.
You are running your own modem and router? Do you know if any modem will work or did you run into any issues working with them to switch over?
@@BoredThatsWhy no issues to switch over but I bought the latest and greatest at the time of set up. Modem was $150 roughly.
@@miguelquintero9747 thanks again
@@miguelquintero9747 I just checked their website and when going with my own modem says it will not include unlimited data.
i cant decide between orbi 970 and the deco be95 systems..
Tough choice. I only know this one and overall I’m really happy with it. :)
I saw on the TP-link launch event, it gives best when you do both wired backhaul and wireless backhaul at the same time, then it does Multi-band backhaul , and then it does
backhaul aggregation🔥( wired + wireless multi-band backhaul )
timestamp 34:25 , video title 2022 TP-Link Wi-Fi 7 Product Launch Event (55min)
Thank you!!!
iPhone 13 Pro Max only supports wifi 6, so that's your bottleneck in your wireless speed tests. Kind of annoying that 5G cellular speeds can be faster than that but c'est la vie. I'm currently considering this system because im running 10 Gbit ethernet throughout the house and they all have multiple 10gbit ports.
Thank you for that information. I appreciate you!!
All these companies paired togather to make us buy new phones, pc and iPad to be compatible with whatever new Gen wifi comes
Thank you for commenting and sharing your thoughts.
I hear what you’re saying, but do a little experiment; take an old smartphone, the older the better, and try using it for a couple days. If your old device behaves exactly the same as your new device, you have great evidence. :)
I did this experiment, once. Surprisingly, with the exception of camera quality, storage capacity, screen resolution, app compatibility (social media was a no go), audio quality….the old phone worked really well. I was able to use the browser, make calls over WiFi. FaceTime worked, but not well.
You make a great observation. Now give it a test and let us know your results. :)
Thank you again for commenting.
you are future proof.
when you get Wifi 7 devices
Thank you for saying that. I feel good about the purchase. I believe you are correct that I am future proofed. :) I appreciate you!!
Once you have WiFi 6 devices or better I'm assuming your speeds will be much better compared to your WiFi 5 devices now. If you don't plan to get newer wireless devices, you're better off with what you already had and save the money. They are good for future proofing though.
Thank you for clarifying... I appreciate you commenting. :)
Your devices have to be wifi7 devices in order to take advantage of the wifi7 router
That's correct. Thank you!!
The only going to see a provement and you have the Wi-Fi 7 chip and wifi-6 inside of your products
Thank you for saying that. You are correct. :) so at least I’m future proofing my system.
Thank you for commenting!! I appreciate you!!
I have a feeling that this may have already been sent in your comments, but a few issues with your test. First of all, you should have unplugged the older tp-link routers and access points you have so your phone does not attempt to connect to them and give you incorrect speedtest. Secondly, you are using an Iphone 13 max. That device does not have wifi-6 capabilities, so there is no possibility you would see anything close to what the speed of wifi-7 Deco can give you. Yes it has wi-fi 5, but the speed is still capped so you will not see any increase. Also, one of the many reasons I dislike Iphones is their slow adoption rate of new wi-fi standards. Dont expect to see wifi-7 chips on any Iphone before 2024 the earliest, 2025 more than likely.
You should set up a "wired backhaul" and "wireless backhaul" congruently to take advantage of the potential wifi speeds the Deco will provide once you upgrade your mobile device. For now, all you can expect is faster speeds on your laptops, pc, tablets(esp if not Apple devices, due to slow adoption rate of wi-fi), and greater range of the signal. So, basically you have future proof yourself, which is good, but dont expect any of the changes you want until you upgrade your mobile devices.
Thank you for commenting. You are correct in everything you said. :)
I’ll be upgrading devices soon. Thank you!!
I am super happy with the system over all.
You're most welcome. Glad to hear, would love a follow up video when you do to see the changes, if possible@@miamicircus305
if you have no devices that are wifi 6e or 7 go into your wifi settings and change 6ghz/7ghz networks to dedicated backhaul
Yes!! But I’m trying to figure that out. Haven’t been able to do it.
@@miamicircus305 try going to the more tab at the bottom right then advanced then dedicated backhaul
@@MrMickmel1 thank you for that. I did it. :) no noticeable difference I can tell yet, but we’ll see.
Go from modem to mac mini on a wired connection via cat6 if you cant get 1.2 your isp is not giving you full 1.2.
Thank you for that. I have the mini hardwired in and it’s maxing out at 1gig. That’s all the mini allows. I looked up the specs. I recently did a test with a friends iPhone 15 pro and we saw speeds exceeding 1.4 gigs which is xfinity’s highest speeds for my area.
I hope we get fiber one day soon. :)
I appreciate you!!
@miamicircus305 oh OK I was thinking is as the model with the 10G port you must have an older one I apologize.
@@roadrunner197069 no worries :) I’m super happy you chose to share information. I may not have known and you were helping me out. :) that’s awesome. You’re awesome. Thank you!!
RUclips should have some quality requirements this is difficult to watch I clicked away
Finally. Some honesty. :)
Thank you for commenting before you clicked away. I appreciate you
@miamicircus305 I'm not being mean it's just if you can afford products like this I'm sure you can afford a microphone some lights and your phone quality will be a lot better
@@googlefriend7685I’m working on it. But you’re definitely right. I should have made some investments early. Thank you for calling it out. I’ll do better. :)
We are all saddened by this news 🙄 Most would just click away without feeling the need to make a big deal about it, but it's hard for the more dramatic people to leave without dropping an insult first. I was looking for someone who would actually show the setup process of the Deco system and so I appreciated the video. I didn't come into it expecting a Michael Bay produced blockbuster, so maybe that's why I had a less negative reaction. Hope you ended up finding what you were looking for.
Iphone's do not support WiFi 7 at this time
Thank you. :)
My s24 ultra does.
Is it worth buying?
I think so. It’s pricey but everything works well. Really well. It should be good for 5 years? I also 3d printed covers and put 40x40x10mm fans. Helps the one in trailer and outside treehouse. Indoors should be ok without fans.
@@miamicircus305 will it increase my signal internet speed?
Did it really hit 40?
40 mbps upload yes. :)
That’s what I pay for.
Thank you for commenting.
yeah myself jumped into wifi 7 skipping wifi 6&6e. regarding the gun do you really need it ? and at home !!! am not American so forgive me
I’ve been pretty happy with the wifi 7. I haven’t seen a big difference except the mesh system is nice because no matter where I am on the property I have internet. I think as I buy new phones and computers I’ll see the real benefits. So happy about that.
As for the gun, it’s well established in the United States that the government does not have an obligation to protect anyone. It’s individuals responsibility to protect themselves. I happen to like that. I always have my gun because it is still dangerous here with criminals. I rather have it and not need it than need it and not have it. Protecting my family is everything.
I understand the trepidations among others, but this is what freedom looks like. At least as I like to say it. Remember, criminals don’t pull permits.
I like our system here in the States. Thank you for asking and allowing me an opportunity to share my opinions.
I appreciate you!!
@@miamicircus305 yeah I understand as long you have it for your family protection I guess it’s a good reason to own one. Where I come from freedom and gun are not the same thing.
Have a good one dude
@@eisaaltamimi3500 that’s great. And I like that for you. I’m genuinely happy for you. But for me, I like our system. :)
Why
Guns = protection and freedom. Look at the usa and look at countries that don't allow guns and ask yourself where you would rather live.
Why you carry your gun everywhere? Lol
That’s a great question. For me, I believe in good people having the proper tools to protect family and property. It’s so easy for bad people to do bad things. I’ve had to catch very bad people before to stop them from hurting and killing. I made a video about that. I’ve been robbed at gun point. This is the reality of life. A gun gives me a fighting chance. I always carry my gun.
Thank you for asking. I appreciate you. :)
Because Floriduh 😂
Better question: Why not?
It's not like ur devices are old it's just that apple is behind the compilation around 2 years so that's why you have the even the 2024 devices still doesn't have it.
Thank you for that information. :)
Incredible demonstation of the deco 33000. I picked up the 22000 yesterday but had to wait 3 hours because all BestBuy Stores credit card system was down but eventually i was able to purchase it online and go in store to pick up. I'll get the 22000 next week as they were on backorder. I actually see someone with more network connected devices than i have wow and cool. The 22000 has has quad-band processing vs 33000 having trio-band process so you are gonna get some great speeds and connectivity. Thanks for the great review over your acres of property.
Hey!! Thank you for commenting and saying those nice words.
I’m really happy with the mesh system and I also looked at the 22000 because it’s very similar but better priced.
I think you’re going to be super happy with it. You’re future proofing the system. It’s a great investment. At the end of the day, having reliable access to the internet is a big part of our day to day lives.
The only thing I’ve done extra is put 40mm fans on top of each router using a 3d printed design plate I made and it does a lot for cooling the system.
Text me at 305.801.4676 when u get your mesh system and I’ll send you the files if you have a 3d printer. Or I can send you pics of mine and possibly design one for you and send it to you if you don’t have a way of designing or 3d printing. The units can get hot and the fans keep them incredibly cool. I notice a difference being that I have so so many devices communicating with the routers.
Sooner is better before I get too busy with the campaign.
Thanks again!! I appreciate you!!!
It sucks
Would be better if you would done speed tests from router in all the other places
You’re right. Speeds were basically all the same as the decos. No difference.
Thank you for commenting.
The bottle neck is iphone
Thank you!!
Hello will you be connecting all of your devices to the new wifi? Like manually as u said 70 devices?
No. That’s not possible. Most devices are on WiFi. :)
No. WiFi mostly. Thx.