GE Dishwasher Not Powering Up| No Power | No Display | GDF530PGMOWW
HTML-код
- Опубликовано: 8 сен 2024
- Part number for the board
WD21X24498
Thanks for watching! Email me if you have any questions at appliancerepairshorts@gmail.com
If this video helped you, you can support me by buying me a coffee. Thanks!
Ko-fi.com/appliancerepairshorts
Venmo-venmo.com/u/ap...
Thanks for the video! I took the circuit board out and when I was reassembling it, it turned out to be a loose connection. I snapped everything into place tightly and voila! it works.
Glad it helped, appreciate the feedback
Is the white dot what tells you that the fuse is broken?
I don't know enough about the circuit board to bypass the fuse. What are the chances the board is the problem?
Thanks for the video!
I have the same exact model (by the looks of it) and the same exact problem.
@@kad85742 The white dot is just a factor marking. If you are not getting power to to display, if you can try and bypass the fuse. That will definitely point you in the right direction. I have seen more board failures with GE dishwashers. It might be easier to just buy the board and take a chance. The next is the user. The new user you will have to set it to match your dishwasher’s model number. I also have a video on that. You will need to add the personality sequence. Keep me posted
3:24 the hard reset and waiting 5 minutes saved me about 500$ on a new machine! Thank you, thank you!
Thanks, just unplugging the main power plug seemed to do it for me. You are awesome!
Glad it helped. Thanks for watching!
same here
totally helped, thank you!
Glad I could help
me too!
You mentioned power restraint.is that attached to a circuit board? Mine has broken away from under the male end plugs into that female end that broke off do I have to replace circuit board or that female plug for the harness male end
Not sure if I understand what you’re saying. Your Diswasher should have a cord restraint. A clamp that holds the wire to the dishwasher . If you are talking about a connection on the main board that is broken off, yes you might need to replace the board. Unless you know how solder. Send me a picture, email it to be certain to what you are saying
Thank you so much, this worked and I replaced the board. I want to repair the old one as a back up, do you know where I can order the pump fuse and a part number? My dishwasher is a GE modelgdf520pgj2ww
So sorry next time email me. Sometimes I don’t see the notifications. I’ll send you a link to the fuse.
Did you change the fuse eventually, or the board ?
Sorry, the customer wanted it changed- the board
Hello, thanks in advance, do know how to test the detergent dispenser from the board? I replaced the Ui board two months a go . Was getting power (14v) but no response, put a new one (UI) on and it solved that issue, it was working good for a while until the dispenser stop opening during cycle, i bench tested it and it worked fine, but still no function when put back together, i did a manual test with service mode, it worked well through the cycles, mine is 7 step test but the but detergent dispenser test fails. Any ideas? Or is it time for a new maim main board? Thanks again
I have a video somewhere on that actually. Not sure if it was uploaded. If you are getting power to it and it is not operating, sounds like it is bad. When you manually test it, do it 5-10 times and see if it completes all. They get stuck and stay shut. I’ll look for the video later. I’m on a service calls all day
@appliancerepairshorts thanks. When I bench tested it. I cycled it a few times. I'll try again. If operanational. Should take a chance with the main board 🤔
@@appliancerepairshorts Hi, i was wondering if you could see if you can find the video on the detergent dispenser GE dishwasher? Bench test again and works every time, no fails, is it the main board that controls it and sends the 13v? Or maybe a thermistor or temp censor gone bad?
I have not found the video. I’m going to make one this weekend. I’ll let you
Hey man, not sure if you’re still interested, I just made a video on that dispenser. I couldn’t find the older one. You probably got a notification, hopefully lol