Sorry sir pero fan orientation pa lang sabog na po. For example front fan.. yung sa baba intake yung s taas exhaust. What happen is mag cycyle papasok tpos palabas yung fan mo. Cool air coming in then cool air going out WTF = no air for the system. Tapos inulit mo nnmn sa taas same config. Mapapa WTF ka na lang. Best scenario for today Is mesh front.. all in take. If may side mounted and bottom fans in take p rin yan. Rear and top are always exhaust. You want more air going in than going out. 42 degree sa rendering? I dont believe it im using a 2x 360mm radiator custom water loop for CPU & 2x nvme m.2 Then 2x 360mm radiator for GPU loop. And at full load with prime95 @ max OC mid 80s ang temp ko using a 3700x. mid 50s for rtx 3080 at full load stress test. If cenibench nmn gamit not prime95 then mid 60s Oh liquid metal gamit ko its the best paste out there. The case is a FULL Tower with clean cable management from the front and back. I think yang temp na sinabi mo sir is while using light task such as browsing and watching movies or idle or near idle 🤣. Each build are also different specially sa cpu and gpu no specs mention so we cant really compare it but i really doubt it sorry. And lastly ang nag bubukas lang ng side pannel lalo na yung ganyan as in both side and front pannel.. are people who have problem with high temps. If your going to use it like that pls purchase a test bench case or any open air cases starting at 1.5k+ php In your fan case orientation pls use a smoker machine to test it. Your fan setting is only base on your theory without a solid baseline. In common sense fan airflow will cycle in and out without touching the system hardware MOBO, CPU, RAM,GPU (and if you know this and do it anyway then damn.. its better to be ignorant than purposely increasing your system temp.. hot going in is better than no air at all thats why its called case airflow you dont divide where the air go.. but make a single air direction flow in this case there is 3 type of flow inside the case and this 3 different flows makes turbulence "search what it means" its not good) Which is much more important than to cool HDD. If your problem is HDD them you can buy a aftermarket HDD cooling fans
di ho ako nakikipagpaligsahan sir.. nag share lang ako kung ano ang opinion ko.. kung hnd ka ho agree, well its not my problem po.. kung ikaw may araw araw nagagawang ganyan, ako minsanan lang kaya kung pagalingan, ikaw na po! :-) wag mo din ako babanatan ng mga hi end na gpu dahil wala ako pambili nyan.. wala ako marereview na ganyan.. kung ikaw wala ka ng meron ako, sana hnd ka na po nag comment.. luma lang ho sa akin.. and yes 42 degrees, sinabi ko ba exact quality? wag po kagad mag react dahil hnd ko ho trabaho ang mag video edit.. karera tayo sir motor / sasakyan.. baka pwede pa.. :-)
@@marceasartome3896 okay lang po bo sir pansamantala lng sa front panel all intake 3fans tapos 1rear fan ay exhaust? apat lng po kasi na fans yung nabili ko.
kung totoo man na 40 deg yung temp nya. dahil siguro naka open kasi yung setup nya walang back and front panel. kanya kanya namang trip yan e. yan yung nag work sa kanya kaya go lang sir basta mapapalamig units mo kahit anong setup payan
actually, kung tataas man po ang electricity bill mo, hnd din po ganun kataas dahil brushless naman po ang mga fans.. technically, ang wattage na sinasabi sa psu is ung max na pwede nyang ibuga kapag nagsaksak ka ng peripherals or accessories at a given load.. meaning, kung 700w at 1000w na ang load sa pc dun na magsisimulang umiksi ang lifespan ng psu mo dahil pinipilit nyang ibato ung 1000w load kahit alam nyang 700w lang ang kaya nya.. pero kung the pc itself lang at basic fans lang 400w psu is enough.. kelangan lang mataas ang leeway kapag meron kang malakas na GPU.. inexplain ko to sa pinakasimpleng paraan na kaya ko.. pasenxa na po kung mejo magulo.. hehehehe..
paano yun sir yung pc ko bigla nalang namamatay kapag maglalaro ako possible po bang sa power supply ang may sira or kaylangan na linisan at lagyan ng panibagong thermal paste ang cpu core?
sa case is matibay talaga yung mga dating pc case, pwede mo nga upuan eh or patungan pag may di ka naabot sa taas
Sorry sir pero fan orientation pa lang sabog na po.
For example front fan.. yung sa baba intake yung s taas exhaust.
What happen is mag cycyle papasok tpos palabas yung fan mo.
Cool air coming in then cool air going out WTF = no air for the system.
Tapos inulit mo nnmn sa taas same config.
Mapapa WTF ka na lang.
Best scenario for today
Is mesh front.. all in take.
If may side mounted and bottom fans in take p rin yan.
Rear and top are always exhaust.
You want more air going in than going out.
42 degree sa rendering? I dont believe it im using a 2x 360mm radiator custom water loop for CPU & 2x nvme m.2
Then 2x 360mm radiator for GPU loop.
And at full load with prime95 @ max OC mid 80s ang temp ko using a 3700x.
mid 50s for rtx 3080 at full load stress test.
If cenibench nmn gamit not prime95 then mid 60s
Oh liquid metal gamit ko its the best paste out there.
The case is a FULL Tower with clean cable management from the front and back.
I think yang temp na sinabi mo sir is while using light task such as browsing and watching movies or idle or near idle 🤣.
Each build are also different specially sa cpu and gpu no specs mention so we cant really compare it but i really doubt it sorry.
And lastly ang nag bubukas lang ng side pannel lalo na yung ganyan as in both side and front pannel.. are people who have problem with high temps.
If your going to use it like that pls purchase a test bench case or any open air cases starting at 1.5k+ php
In your fan case orientation pls use a smoker machine to test it.
Your fan setting is only base on your theory without a solid baseline.
In common sense fan airflow will cycle in and out without touching the system hardware MOBO, CPU, RAM,GPU (and if you know this and do it anyway then damn.. its better to be ignorant than purposely increasing your system temp.. hot going in is better than no air at all thats why its called case airflow you dont divide where the air go.. but make a single air direction flow in this case there is 3 type of flow inside the case and this 3 different flows makes turbulence "search what it means" its not good)
Which is much more important than to cool HDD.
If your problem is HDD them you can buy a aftermarket HDD cooling fans
di ho ako nakikipagpaligsahan sir.. nag share lang ako kung ano ang opinion ko.. kung hnd ka ho agree, well its not my problem po.. kung ikaw may araw araw nagagawang ganyan, ako minsanan lang kaya kung pagalingan, ikaw na po! :-)
wag mo din ako babanatan ng mga hi end na gpu dahil wala ako pambili nyan.. wala ako marereview na ganyan.. kung ikaw wala ka ng meron ako, sana hnd ka na po nag comment.. luma lang ho sa akin..
and yes 42 degrees, sinabi ko ba exact quality? wag po kagad mag react dahil hnd ko ho trabaho ang mag video edit..
karera tayo sir motor / sasakyan.. baka pwede pa.. :-)
oo sang ayon ako sayo. mali un turo nya, hnd ganyan un setup sakin. sabi na parang may mali eh. anyways depende nalang sa diskarte nya yan
respect kay sir nag sharr lang ng idea although napansin ko din dapat front panel all intake 3intake 3 exhaust
@@marceasartome3896 okay lang po bo sir pansamantala lng sa front panel all intake 3fans tapos 1rear fan ay exhaust? apat lng po kasi na fans yung nabili ko.
kung totoo man na 40 deg yung temp nya. dahil siguro naka open kasi yung setup nya walang back and front panel. kanya kanya namang trip yan e. yan yung nag work sa kanya kaya go lang sir basta mapapalamig units mo kahit anong setup payan
Bossing magkano tong buong build mo?
Lupet tlaga
Boss dagdag din ba sa electricity bill kapag maraming cooling fan or same lang..?
actually, kung tataas man po ang electricity bill mo, hnd din po ganun kataas dahil brushless naman po ang mga fans.. technically, ang wattage na sinasabi sa psu is ung max na pwede nyang ibuga kapag nagsaksak ka ng peripherals or accessories at a given load.. meaning, kung 700w at 1000w na ang load sa pc dun na magsisimulang umiksi ang lifespan ng psu mo dahil pinipilit nyang ibato ung 1000w load kahit alam nyang 700w lang ang kaya nya.. pero kung the pc itself lang at basic fans lang 400w psu is enough.. kelangan lang mataas ang leeway kapag meron kang malakas na GPU.. inexplain ko to sa pinakasimpleng paraan na kaya ko.. pasenxa na po kung mejo magulo.. hehehehe..
Tanong lang po kung 240 watts lng na power supply ko. Ilan pede ko ilagay na cooling fan n ganyan?
fans mostly use 1.6w or 3w. so its not that much to calculate
Nc 1 idol
specs?
paano yun sir yung pc ko bigla nalang namamatay kapag maglalaro ako possible po bang sa power supply ang may sira or kaylangan na linisan at lagyan ng panibagong thermal paste ang cpu core?
check temp po sir.. or possible psu problem po..
@@SteveKalikot temp nya po nasa 42 po
@@SteveKalikot nangyare lang po ito nung ilang beses na nag brownout
@@KENJIEHAXX psu na po yan sir.. ano po ba brand ng psu nila?
@@SteveKalikot VALIANT 700w sir
Baka naman po sir
It's a "system unit"
sir anung full specs ng pc mo , hehe
"Tamang airflow" 🤣
Idol may pm po ako sa inyo