Subzero freezer not cooling, here we show you how to replace the compressor in a Subzero freezer, subzero refrigerator. Subzero 511, 532, 550, 561, 590, 611, 632, 650, 690.
Let me just suggest a few things since I am in the trade. You should always vacuum the system to ensure no moisture, and when charging the system you need to flip the tank upside down and charge as a liquid not a vapor which is marked on the tank
Hi, I’m learning the domestic refrigeration trade at the present.... would you mind doing a video on your sealed system repair backpack set up??? All of the set ups I have seen so far take up so much space in the truck...🙈 there has to be a better way... thank you for the nice video
The compressor for my Subzero Freezer was recently replaced. The Tech made a comment that he was putting in a larger compressor than what I had... ( "had in his truck). Ever since he replaced it, many times when it kicks on, the power in my house flashes and dims.. ... Very annoying because I also lose my internet/tv when the power surges in the house. Should he have put in a larger compressor than what was there from the factory? This power disturbance in my house started about the same time as he did the repair a few weeks ago.
A Sub-Zero is supposed to be on its own dedicated electrical circuit. My guess is it is sharing a lightning circuit in your home. Have an electrician map out your circuits and check the voltage drop.
Does it matter what size filter dryer you use? Also, I have heard that it is a good idea to add a 2nd filter dryer to the same line. If so, where would you install that and how.
Terrific video. When you use the vice grip pliers to evacuate the system do you simply have this connected to a recovery bag? Is there a recovery bag you recommend? Finally, is this the same recovery bag you use to re-fill the system?
650 subzero, had a leak(freezer) at the loop for the condensat pan underneath the whole fridge,I brazed the worn spot,pulled vac on process port,added 6oz of r134a gas not liguid thru process port..compressor draws Lra at 12 and overload pops....reclaimed some gas and it starts and runs with supco 3in1 ....any thoughts
I have a 650 and I have “ vacuum condenser “ flashing on display in fridge. IV cleaned condenser well , also fan never shuts off , runs all the time . Fridge stays cold as well as freezer. Help !
PLEASE. Can anybody show me how to access the power cord on a SubZero fridge like this? I need to test running an extension cord to it from my outdoor generator. A video link would be ideal. Thanks in advance.
I need to add refrigerant (R134a) to the freezer compressor but can’t identify the suction line to connect the gage. Obviously the short line coming out of the compressor, with a valve and a label that reads “R134a only”, isn’t it. Is the suction line the one that comes out of the compressor and leads to the filter drier?
I know this comment was two years ago but, he's working on the freezer compressor. We have a 532 and our fridge compressor is out and, it's on the right. The start relay was clicking so, we thought it was just that. Turns out, our compressor grounded out. Sometimes, an "easy fix" turns into a major one lol
Wanted to say thanks for all your videos. You’ve helped me more than you know. Keep up the good work.
It's 20 dlls
Let me just suggest a few things since I am in the trade. You should always vacuum the system to ensure no moisture, and when charging the system you need to flip the tank upside down and charge as a liquid not a vapor which is marked on the tank
Decent video I'd really recommend using nitrogen and getting a vacuum pump rather than sweep charging
Hi, I’m learning the domestic refrigeration trade at the present.... would you mind doing a video on your sealed system repair backpack set up??? All of the set ups I have seen so far take up so much space in the truck...🙈 there has to be a better way... thank you for the nice video
What is the price for a job like this?
Thanks for posting this wonderful video...🌞🥳
Hi what replacement compressor for sub-zero 2711 The fridge side Thank you
What number tip do you use on the torch?
The compressor for my Subzero Freezer was recently replaced. The Tech made a comment that he was putting in a larger compressor than what I had... ( "had in his truck). Ever since he replaced it, many times when it kicks on, the power in my house flashes and dims.. ... Very annoying because I also lose my internet/tv when the power surges in the house. Should he have put in a larger compressor than what was there from the factory? This power disturbance in my house started about the same time as he did the repair a few weeks ago.
A Sub-Zero is supposed to be on its own dedicated electrical circuit. My guess is it is sharing a lightning circuit in your home. Have an electrician map out your circuits and check the voltage drop.
Does it matter what size filter dryer you use? Also, I have heard that it is a good idea to add a 2nd filter dryer to the same line. If so, where would you install that and how.
Great job
What’s the pressure for the fresh food section vs the freezers
Terrific video. When you use the vice grip pliers to evacuate the system do you simply have this connected to a recovery bag? Is there a recovery bag you recommend? Finally, is this the same recovery bag you use to re-fill the system?
No way
Hello, I am a beginner refrigeration mechanic and I have a problem of not knowing where to go to buy spare parts in bulk, would you know anywhere?
Great video! What area or State do you work in? I'd love to have you repair my Subzero 561 fridge. Refrigerator is not cooling, freezer works fine.
you would need to check the refrigerator compressor not the Freezer compressot
650 subzero, had a leak(freezer) at the loop for the condensat pan underneath the whole fridge,I brazed the worn spot,pulled vac on process port,added 6oz of r134a gas not liguid thru process port..compressor draws Lra at 12 and overload pops....reclaimed some gas and it starts and runs with supco 3in1 ....any thoughts
I have a 650 and I have “ vacuum condenser “ flashing on display in fridge. IV cleaned condenser well , also fan never shuts off , runs all the time . Fridge stays cold as well as freezer. Help !
Fine work
how to add freon if Fridge is not cooling but freezer is fine ?
What flux do you use in this video. Thanks.
PLEASE. Can anybody show me how to access the power cord on a SubZero fridge like this? I need to test running an extension cord to it from my outdoor generator. A video link would be ideal. Thanks in advance.
I need to add refrigerant (R134a) to the freezer compressor but can’t identify the suction line to connect the gage.
Obviously the short line coming out of the compressor, with a valve and a label that reads “R134a only”, isn’t it.
Is the suction line the one that comes out of the compressor and leads to the filter drier?
Why are you replacing an 80 series compressor with a 60 series?
Because the part number subs to it as per subzero.
Part#?
How much would hiring someone to do this cost?
Including the cost of the compressor from $500 to $800
In SA, TX around 1k to 1.4k
Great video, wonder which compressor is for the freezer from this view?
ruclips.net/video/9A0rljicTaI/видео.html
I know this comment was two years ago but, he's working on the freezer compressor. We have a 532 and our fridge compressor is out and, it's on the right. The start relay was clicking so, we thought it was just that. Turns out, our compressor grounded out. Sometimes, an "easy fix" turns into a major one lol